A new multispectral InGaZnO (IGZO) thin-film phototransistor (TF PT) based on a graded band-gap (GBG) SiGe capping layer with metallic nanoparticles (MNPs) is proposed. An accurate drain-current model is developed to investigate the device performances, where the optical characteristics under different light excitations (530 nm, 820 nm, and 1550 nm) are analyzed using the 3-D Finite-difference time-domain method (FDTD). It is found that the proposed device shows high photoresponse characteristics. Besides, it is revealed that the GBG configuration, MNPs spatial distribution and size can induce a complex behavior, which influences the device photoresponse over multiple spectral bands. Importantly, an iterative decision-maker framework based on the Multi-Objective Genetic Algorithm (MOGA) metaheuristic approach is implemented to design efficient multispectral IGZO TF PT. It is demonstrated that the proposed MOGA-based scheme paves the way for the designer to identify the appropriate GBG profile and MNPs spatial distribution for highly-responsive devices at selective Visible and IR wavelengths and to realize high-performance multispectral sensors. The proposed approach based on combining the proposed IGZO TF PT structure with MOGA metaheuristic computation opens up a new strategy for the design and experimental fabrication of high-performance multispectral optoelectronic devices.

In this paper, a new high-performance tunable band-selective (UV-Visible) photodetector (PD) based on RF sputtered a-SiC active layer is demonstrated. SiC thin-films were deposited on glass substrate by RF magnetron sputtering method at different sputter power values ranging from 60 W to 120 W. The samples morphological, structural, optical and photodetection properties were investigated by carrying out XRD, SEM, EDS, UV-Vis spectroscopy and photoresponse measurements. It was revealed that the sputtering power could modulate the optical behavior of a-SiC alloy, tuning favorable visible absorbance at high sputter power. This phenomenon is correlated with the influence of the RF power on the SiC film structural properties and compositions. Interestingly, measurements showed that a-SiC PD elaborated at 60 W of RF power can detect UV radiation with a high responsivity of 138 mA/W, low noise effects, superior detectivity of 7.8 × 10¹² Jones, while maintaining the visible blindness property. On the other hand, the prepared device at high sputtering power exhibits extended photoresponse characteristics, yielding 426 mA/W and 77 mA/W of responsivity values over UV and visible ranges, respectively. Therefore, the present investigation can provide a new strategy for the design and fabrication of photodetector devices based on SiC platform with broadband and solar-blind adjustable sensing purposes according to the desired application.

Cost-effective multispectral photodetectors (PDs) exhibiting a high UV-Visible-NIR photoresponse offer an avenue for developing environmental monitoring devices, imaging sensors, object discrimination, and optical links. However, PDs based on a single semiconductor as light-sensitive layer are unable to provide broadband photodetection properties. In this work, a new PD device based on ZnO-ZnS Microstructured Composite (MC) which achieves a high UV-Visible-NIR photoresponse is demonstrated. The ZnO-ZnS MC is elaborated by combining vacuum thermal evaporation technique and a suitable annealing process. Scanning Electron Microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and UV-Vis-NIR spectroscopy were used to elucidate the morphological, structural and optical properties of the prepared sample. It was demonstrated that the ZnO-ZnS MC can be useful to enhance the visible absorbance efficiency by promoting efficient light-scattering effects. It is revealed that the prepared UV-Vis-NIR PD offers a low dark current of 5 nA, a high I_ON/I_OFF ratio of 78 dB and an enhanced responsivity in UV, visible and NIR ranges. The proposed multispectral PD demonstrates a high I_ON/I_OFF current ratio under self-powered working regime. Therefore, the proposed ZnO-ZnS MC is believed to provide new insights in developing efficient, self-powered and low-cost multispectral PDs for high-performance optoelectronic systems.

Cost-effective multispectral photodetectors (PDs) exhibiting a high UV-Visible-NIR photoresponse offer an avenue for developing environmental monitoring devices, imaging sensors, object discrimination, and optical links. However, PDs based on a single semiconductor as light-sensitive layer are unable to provide broadband photodetection properties. In this work, a new PD device based on ZnO-ZnS Microstructured Composite (MC) which achieves a high UV-Visible-NIR photoresponse is demonstrated. The ZnO-ZnS MC is elaborated by combining vacuum thermal evaporation technique and a suitable annealing process. Scanning Electron Microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and UV-Vis-NIR spectroscopy were used to elucidate the morphological, structural and optical properties of the prepared sample. It was demonstrated that the ZnO-ZnS MC can be useful to enhance the visible absorbance efficiency by promoting efficient light-scattering effects. It is revealed that the prepared UV-Vis-NIR PD offers a low dark current of 5 nA, a high I_ON/I_OFF ratio of 78 dB and an enhanced responsivity in UV, visible and NIR ranges. The proposed multispectral PD demonstrates a high I_ON/I_OFF current ratio under self-powered working regime. Therefore, the proposed ZnO-ZnS MC is believed to provide new insights in developing efficient, self-powered and low-cost multispectral PDs for high-performance optoelectronic systems.

In this paper, ZnO-ZnS composite structure is proposed as a new efficient and earth-abundant absorber material for thin-film solar cells (TFSCs). Promising elaboration strategy based on combining vacuum thermal evaporation technique and oxidation process under an annealing temperature of 500 °C was used to prepare ZnO-ZnS composite with high sun-light absorption capabilities. The fabricated microstructure was then characterized by Scanning Electron Microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and UV–Visible absorption spectroscopy. The influence of the annealing time on the structural and optical performances of the prepared samples was investigated. Surface analysis demonstrated the ZnO decoration of ZnS thin-film, where SEM images showed dense and pinhole-free ZnO-ZnS composite with micrometer-sized grains and a few voids visible at thin-films surface. Optical characterization showed that the prepared thin-film absorber exhibits an optical band-gap of 2.65 eV with a high Total Absorption Efficiency (TAE) of 62% and an absorption coefficient exceeding 2 × 10⁴ cm⁻¹. In addition, I-V characteristics under dark and 1-sun illumination of the microstructured ZnO-ZnS composite were extracted. It was revealed that the proposed absorber showcases a high visible photoresponse. Therefore, promoting effective light-scattering effects, this innovative ZnO-ZnS composite offers a sound pathway to prepare alternative low-cost absorbers for the future development of TFSCs.