Due to advanced monitoring technologies including the plug-in of the cyber and physical layers on the Internet, cyber-physical systems are becoming more vulnerable than ever to cyberthreats leading to possible damage of the system. Consequently, many researchers have devoted to studying detection and identification of such threats in order to mitigate their drawbacks. Among used tools, Machine Learning (ML) has become dominant in the field due to many usability characteristics including the blackbox models availability. In this context, this paper is dedicated to the detection of cyberattacks in Smart Grid (SG) networks which uses industrial control systems (ICS), through the integration of ML models assembled on a small scale. More precisely, it therefore aims to study an electric traction substation system used for the railway industry. The main novelty of our contribution lies in the study of the behaviour of more realistic data than the traditional studies previously shown in the state of the art literature by investigating even more realistic types of attacks. It also emulates data analysis and a larger feature space under most commonly used connectivity protocols in today's industry such as S7Comm and Modbus.

The clean energy conversion characteristics of proton exchange membrane fuel cells (PEMFCs) have given rise to many applications, particularly in transportation. Unfortunately, the commercial application of PEMFCs is hampered by the early deterioration and low durability of the cells. In this case, accurate real-time condition monitoring plays an important role in extending the lifespan of PEMFCs through accurate planning of maintenance tasks. Accordingly, among the widely used modeling tools such as model-driven and data-driven, machine learning has received much attention and has been extensively studied in the literature. Small-scale machine learning (SML) and Deep Learning (DL) are subcategories of machine learning that have been exploited so far. In this context and since SML usually contains non-expansive approximators, this study was dedicated to improving its feature representations for better predictions. Therefore, a recurrent expansion experiment was conducted for several rounds to investigate a linear regression model under time series prognosis of PEMFCs. The results revealed that the prediction performance of SML tools under stationary conditions could be further improved.

The increase in electricity theft has become one of the main concerns of power distribution networks. Indeed, electricity theft could not only lead to financial losses, but also leads to reputation damage by reducing the quality of supply. With advanced sensing technologies of metering infrastructures, data collection of electricity consumption enables data-driven methods to emerge in such non-technical loss detections as an alternative to traditional experience-based human-centric approaches. In this context, such fraud prediction problems are generally a thematic of missing patterns, class imbalance, and higher level of cardinality where there are many possibilities that a single feature can assume. Therefore, this article is introduced specifically to solve data representation problem and increase the sparseness between different data classes. As a result, deeper representations than deep learning networks are introduced to repeatedly merge the learning models themselves into a more complex architecture in a sort of recurrent expansion. To verify the effectiveness of the proposed recurrent expansion of deep learning (REDL) approach, a realistic dataset of electricity theft is involved. Consequently, REDL has achieved excellent data mapping results proven by both visualization and numerical metrics and shows the ability of separating different classes with higher performance. Another important REDL feature of outliers correction has been also discovered in this study. Finally, comparison to some recent works also proved superiority of REDL model.

In this paper we address the integration of two-level supply chain with multiple items, production facility and retailers’ demand over a considered discrete time horizon. This two-level production distribution system features capacitated production facility supplying several retailers located in the same region. If production does take place, this process incurs a fixed setup cost as well as unit production costs. In addition, deliveries are made from the plant to the retailers by a limited number of capacitated vehicles and routing costs are incurred. This work aims at implementing a solution to minimize the sum of the costs at the production facility and the retailers. The methodology adopted to tackle this issue is based on a hybrid heuristic, greedy and genetic algorithms that uses strong formulation to provide a good solution of a guaranteed quality that are as good or better than those provided by the MIP optimizer with a considerably larger run time. The results demonstrate that the proposed heuristics are effective and performs impressively in terms of computational efficiency and solution quality.

A comparative study between a set of chosen machine learning tools for direct remaining useful life prediction is presented in this work. The main objective of this study is to select the appropriate prediction tool for health estimation of aircraft engines for future uses. The training algorithms are evaluated using “time-varying” data retrieved from Commercial Modular Aero-Propulsion System Simulation (C-MAPSS) developed by NASA. The training and testing processes of each algorithm are carried out under the same circumstances using the similar initial condition and evaluation sets. The results prove that among the studied training tools, Support vector machine (SVM) achieved the best results.

Condition Monitoring of photovoltaic systems plays an important role in maintenance interventions due to its ability to solve problems of loss of energy production revenue. Nowadays, machine learning-based failure diagnosis is becoming increasingly growing as an alternative to various difficult physical-based interpretations and the main pile foundation for condition monitoring. As a result, several methods with different learning paradigms (e.g. deep learning, transfer learning, reinforcement learning, ensemble learning, etc.) have been used to address different condition monitoring issues. Therefore, the aim of this paper is at least, to shed light on the most relevant work that has been done so far in the field of photovoltaic systems machine learning-based condition monitoring.

One of the main data-driven challenges when assessing bearing health is that training and test samples must be drawn from the same probability distribution. Indeed, it is difficult and almost rare to witness such a phenomenon in practical applications due to the constantly changing working conditions of rotating machines. In addition, collecting sufficient deterioration samples from the bearing life cycle is not possible due to the huge memory requirements and processing costs. As a result, accelerated life tests are believed to be the primary alternatives to such a situation. However, and unfortunately, the recorded samples always are subject to lack of real patterns. Therefore, in this paper, a transfer learning approach is performed to solve such kind of problem where PRONOSTICO dataset is used to assess the current procedures.

This paper presents a state-of-the-art of recent research work analyzing the requirements of Industry 4.0, particularly related to the competences issue. Over the last few years, the fourth industrial revolution has attracted researchers worldwide to find suitable solutions. However, there are still many gaps related to the Industry 4.0, particularly related to the humans competences issue. Among the many challenges facing companies in this paradigm, one of the most important is the qualification of employees with the necessary skills to succeed in a transformed work environment. To cope with knowledge and competence challenges related to new technologies and processes of Industry 4.0, new strategic approaches for holistic human resource management are needed in manufacturing companies. The main objective of the presented research is to investigate the importance of employee competences, key to the development of Industry 4.0

It is always difficult to identify the most recent works that have been published, especially those published in recent years, due to delays in putting publications online, citations indexe, etc. Scientometry offers to researchers various concepts, models and techniques that can be applied to knowledge management (KM) in order to explore its foundations, its state, its intellectual core, and its potential future development. To this end, we have developed a scientometric KM framework to calculate the scientometric indexes related to a query introduced in the Scopus database, to facilitate research and monitoring of productivity and collaboration between the authors of KM in particular and also the dissemination of knowledge. The works between 2014 and 2019 are taken, the industry of services was omitted. It might help the decision makers and researchers to optimize their time and efforts. We used Unified Modeling Language (UML) to translate the development ideas of the scientometric framework structure into diagrams, and Delphi 7 to calculate the indexes and ensure other operations of research (about: articles, their authors, conferences, etc). This framework is only valid for Excel files extracted from Scopus or similar format. Finally, the relation between KM and industry 4.0 was established on found articles in Scopus.

The era of Industry 4.0 has already begun, however, several improvements should be achieved concerning this revolution. Data mining is one of the modest and efficient tools. Based on a specific query entered in Scopus, related to Industry 4.0, data mining (DM) and logistics, selected documents were studied and analyzed. A brief background of Industry 4.0 and DM are presented. A generic analysis showed that the attentiveness for the cited subject area by countries, universities, authors and especially companies and manufacturers increased through the years. Content analysis reveals that the improvement in quality of the technologies used in manufacturing was noticed, concluding that DM would give Industry 4.0 a leap forward, yet research is dealing with several challenges.

This paper investigates the use of the Particle Swarm Optimization (PSO) algorithm to quantify the effect of RUL uncertainty on predictive maintenance planning. The prediction of RUL is influenced by many sources of uncertainty, and it is required to quantify their combined impact by incorporating the RUL uncertainty in the optimization process to minimize the total maintenance cost. In this work, predictive maintenance of a multi-functional single machine problem is adopted to study the impact of RUL uncertainty on maintenance planning. Therefore, the PSO algorithm is integrated with a random sampling-based strategy to select a sequence that performs better for different values of RUL associated with different jobs. Through a numerical example, results show the importance of optimizing maintenance actions under the consideration of RUL randomness.