HOME / PUBLICATIONS /

Publications by Type: Conference Proceedings

2020
Naceri, Farid, A Saidi, and Lamia YOUB. 2020. “Fuzzy Logic Controller in a Speed Control for Doubly Fed Induction Machine (DFIM)”. 2nd International Conference on Natural and Applied Science And Engineering (ICNASEN – 2020)  21 – 25 October .
2019
Salah, Benbouza Med. 2019. “New nanotechnology structures CNTFET GaAs”. 8th International Conference on Renewable Energy Research and Applications (ICRERA). Publisher's Version
Nabil, Benhadda. 2019. “Characterization of Laminate Carbon Fibers Materials Using a New Multi-Coils Circular Eddy Current Sensor”. The First International Conference on Materials, Environment, Mechanical and Industrial Systems (ICMEMIS’19), 29-30 Juin 2019, University of Djelfa. Publisher's Version
2018
2018. “Energy Optimization Nanotechnology Structures CNTFET GaAs”. 7th International Conference on Renewable Energy Research and Applications (ICRERA). Publisher's Version
2018. “Design of a controller Linear PID for the Wheels Slip Rate of Systems ABS”. International conference on Electronics and Electrical Engineering IC3E-2018.
2018. “Power Quality Enhancement of Grid Connected Brushless Doubly Frd Induction Generator Using Sliding Mode Control”. The Fourth International conference on Mechanics and Energy ICME'2018. Publisher's Version
Abderazek, Saidi. 2018. “A Fuzzy adaptive control of doubly fed induction machine (DFIM)”. ICMIE 2018. Publisher's Version
Anouaressadate, Aouf. 2018. “Study of the use of eddy currents for defect detection on U50 Rail”. 8th International Advances in Applied Physics & Materials Science Congress and Exhibition Sentido Lykia Resort, Oludeniz Turkey, APMAS 24 - 30 April 2018. Publisher's Version
2017
Bensalah, Chattouh. 2017. “Identification des formes des fissures par réseaux de neurones artificiels dans un système de CND par courants de Foucault”. 5ème Collogue de l’Inductique, Université des Sciences et de la Technologie d’Oran –Mohamed Boudiaf, 13-14 Décembre 2017. Publisher's Version
Chaouki, Lahrech Ahmed. 2017. “Détection de Délaminage dans une Plaque en MCFC par Utilisation d'un Capteur Multi-Bobine à Champ Magnétique Tournant”. 5ème Collogue de l’Inductique, Université des Sciences et de la Technologie d’Oran –Mohamed Boudiaf 13-14 Décembre 2017. Publisher's Version
Anouaressadate, Aouf. 2017. “Etude de la Détection de Défauts de Rail U50 par Courants de Foucault Non Destructifs”. 5ème Collogue de l’Inductique, Université des Sciences et de la Technologie d’Oran –Mohamed Boudiaf, 13-14 Décembre 2017. Publisher's Version
Mouloud, Feliachi. 2017. “Identification du Tenseur de Conductivité Electrique d'une Plaque en MCFC par Utilisation d'un Capteur Multi-Bobine à Champ Magnétique Tournant”. NUMELEC 2017, 9ème Conférence Européenne sur les Méthodes Numériques en Electromagnétisme, 15-17 Novembre 2017, Paris, France. Publisher's Version
2016
Zeghichi, L. 2016. “The Combination Finite Element / Monte Carlo Collision for Gas Discharge Modeling”. ICD’2016 code 85439, Montpelier.
Boudraa, S. 2016. “ANFIS Fault Severity Detection and Appropriate Maintenance for Transformer Oil Using Combined DGA Criteria”. Euromaintenance Athenes.
Abdelmalik, Bouhantala. 2016. “Simulation of a 2D Magnetics Drug Targenting Model”. International Conference on Advances in Civil, Structural and Environmental Engineering ACSEE . Publisher's Version
Abderazek, Saidi. 2016. “Comparative study between sliding mode controller and fuzzy sliding mode controller in a speed control for doubly fed induction motor”. 2016 4th International conference on control engineering & information technologfy (CEIT).
2015
Saad, Chaouche. 2015. “Computer Aided Design and Multiple Coupled Circuit Modelling of BDFM”. 3rd International Conference on Control, Engineering & Information Technology CEIT : pp. 1 - 6. Publisher's Version Abstract
A general and efficient algorithmic implementation is presented for calculating of self and/or mutual inductances using winding function theory for any type of stator and/or rotor layout slot windings. Then, this algorithm is applied on brushless doubly fed induction machines with standard cage. In fact, several kinds of slot windings are treated to prove the efficiency of this technique. The procedure is provided with inputs vector consisted by the machine main dimensions, air gap length, stator and rotor slot numbers, pole pairs, slots per pole and phase and the winding slots sequence defining the winding kind. Consequently, the application of this procedure yields both self and mutual inductances matrix of the stator and the rotor as well as the stator-rotor mutual inductances curve and its derivative. Finally, a dynamic simulation with multiple coupled circuits modelling is carried out and the results are presented and discussed.
2014
Saliha, Boudraa. 2014. “A comparative study of impact of electrical stress and thermal aging on transformer oil”. 11th International Multi-Conference on Systems, Signals & Devices SSD; Espagne 2014. Publisher's Version
Said, Benaggoune. 2014. “Direct Torque Control Sensor of PMSM with EKF Estimation of Speed and Load Torque Observer”. 16th International power Electronics and motin Control conference and Exposition PEMC. Publisher's Version
Sebti, Belkacem. 2014. “Design of Hybrid Controller by Fuzzy Sliding Mode for an Inuction Motor”. International Conference on Control Engineering & Information technology CEIT .

Pages