@mastersthesis {5548,
	title = {Contribution au contr{\^o}le de la machine synchrone double {\'e}toile},
	year = {2019},
	author = {Laggoune Louanasse}
}
@mastersthesis {5543,
	title = {{\'E}tude et R{\'e}alisation d\&$\#$39;un Banc D\&$\#$39;essai D{\'e}die aux Applications du Contr{\^o}le Non Destructif par Courants de Foucault},
	year = {2019},
	author = {AOUFI Mahfoud and KHODJA Lakhdar}
}
@mastersthesis {5542,
	title = {Contr{\^o}le Non Destructif par Flux de Fuite Magn{\'e}tique Appliqu{\'e} aux Pi{\`e}ces Ferromagn{\'e}tiques},
	year = {2019},
	author = {KHEBAL Merwane and DALI Abderrahmane}
}
@mastersthesis {5541,
	title = {Commande Directe du Couple de la Machine Asynchrone Double Etoile(MASDE)},
	year = {2019},
	author = {Bettyeb Souhyla and Belaidi Kaoutar}
}
@mastersthesis {5535,
	title = {Commande vectorielle de la machine asynchrone par un r{\'e}gulateur PI},
	year = {2019},
	author = {ZAHAL Farid}
}
@mastersthesis {5532,
	title = {Faults Diagnosis of Turbo-Generator using Artificial Intelligence},
	year = {2019},
	author = {SADI.M.A}
}
@mastersthesis {5529,
	title = {Outils de diagnostic des transformateurs de puissance},
	year = {2019},
	author = {SAHTAL Rabeh and TOUCHEN. H}
}
@mastersthesis {5508,
	title = {Conception, {\'e}tude et r{\'e}alisation d\&$\#$39;un syst{\`e}me de positionnement},
	year = {2019},
	author = {KHERCHOUCHE Abdelmalik and MEDOUR Abdelhalim}
}
@mastersthesis {5507,
	title = {Etude et mod{\'e}lisation num{\'e}rique d\&$\#$39;une machine {\`a} courant continu sans balais},
	year = {2019},
	author = {MOHAMED CHERIF Siham}
}
@mastersthesis {5506,
	title = {Role de la compensation de l\&$\#$39;{\'e}nergie r{\'e}active dans la stabilit{\'e} des r{\'e}seaux {\'e}lectriques},
	year = {2019},
	author = {CHERRAF Fatih}
}
@mastersthesis {5497,
	title = {Influence des variateurs de vitesse sur la qualit{\'e} de l\&$\#$39;{\'e}nergie {\'e}lectrique},
	year = {2019},
	author = {AOURRA Med Lamine}
}
@mastersthesis {5435,
	title = {Contribution  {\`a} la commande d\&$\#$39;un MADA . Apport des techniques de l\&$\#$39;intelligence artificielle},
	year = {2019},
	author = {ZIDANI  Med yazid}
}
@mastersthesis {5424,
	title = {Contr{\^o}le adaptatif de la machine synchrone {\`a} aimants permanents},
	year = {2019},
	author = {DRID Hamza}
}
@mastersthesis {5423,
	title = {Commande par mode glissant de la machine synchrone {\`a} aimants permanents},
	year = {2019},
	author = {ZEMACHE  Abderahmane}
}
@mastersthesis {5414,
	title = {Commande vectorielle de la machine synchrone {\`a} aimants permanents},
	year = {2019},
	author = {KHERCHOUCHE  Khaled}
}
@mastersthesis {5413,
	title = {Commande asynchrone d\&$\#$39;une machine asynchrone double {\'e}toile},
	year = {2019},
	author = {BOUSLIMANI  Souhila}
}
@mastersthesis {5412,
	title = {Commande par DTC de la GADA},
	year = {2019},
	author = {DJOUALA  Imane}
}
@mastersthesis {5411,
	title = {Contr{\^o}le par d{\'e}couplage de la MSAP},
	year = {2019},
	author = {DERRADJI Med Lamine}
}
@mastersthesis {5410,
	title = {Commande de la machine asynchrone par Mode de glissement},
	year = {2019},
	author = {MADACI  Riad}
}
@mastersthesis {5409,
	title = {Commande hybride floue-glissant de la machine {\`a} induction},
	year = {2019},
	author = {ZITOUNI Amel}
}
@mastersthesis {5391,
	title = {La maintenance d\&rsquo;une turbine {\`a} gaz par la m{\'e}thode de Weinbull},
	year = {2019},
	author = {MAMOUNI mohamed and GHIOUB Aziz}
}
@mastersthesis {5390,
	title = {La maintenance des syst{\`e}mes hydrauliques et pneumatiques},
	year = {2019},
	author = {KERKEB Adel and DIBAOUI Mohamed}
}
@mastersthesis {5388,
	title = {R{\'e}alisation d\&$\#$39;une Maquette P{\'e}dagogique d\&$\#$39;un Syst{\`e}me Hybride Eolien Photovoltaique},
	year = {2019},
	author = {KHETTACHE Ramzeddine and MECHENANE Farouk}
}
@mastersthesis {5387,
	title = {Etude d\&$\#$39;une Batterie Solaire},
	year = {2019},
	author = {RAHAMINE Fayrouze}
}
@mastersthesis {5386,
	title = {Etude d\&$\#$39;un Volant d\&$\#$39;Inertie},
	year = {2019},
	author = {RAZI Ilhem}
}
@mastersthesis {5372,
	title = {Impl{\'e}mentation de l\&rsquo;Identification et de la Commande Num{\'e}riques d\&rsquo;un Moteur {\`a} Courant Continu {\`a} base d\&rsquo;Arduino-Matlab/Simulink},
	year = {2019},
	author = {BERTAL Imane}
}
@article {4766,
	title = {Hybrid fuzzy second order sliding mode control speed for Direct torque Control of Dual Star Induction motor, ISSN 1112-9867},
	journal = {Journal of Fundamental and Applied Sciences},
	year = {2019},
	author = {B. Kiyyour and D. Naimi and A. Salhi and Laggoune Louanasse}
}
@proceedings {4759,
	title = {New nanotechnology structures CNTFET GaAs},
	journal = {8th International Conference on Renewable Energy Research and Applications (ICRERA)},
	year = {2019},
	url = {https://www.icrera.org/},
	author = {Benbouza Med Salah}
}
@article {4752,
	title = {A New robust adaptive fuzzy synergetic control for nonlinear systems with an application to an inverted pendulum, ISSN / e-ISSN 1746-6172 / 1746-6180},
	journal = { International Journal of Modelling Identification and Control },
	volume = {volume 33},
	number = {N{\textdegree}2},
	year = {2019},
	abstract = {This paper deals with a nonlinear adaptive control design based on synergetic control, which also uses fuzzy systems to approximate the dynamics of nonlinear systems. The stability of the closed-loop system is ensured by the Lyapunov synthesis in the sense that all the signals are bounded, and the controller parameters adjusted by adaptation laws. The proposed algorithm is applied to an inverted pendulum to track a sinusoidal reference trajectory. Simulations and discussion are presented to illustrate the new robust adaptive fuzzy synergetic control described in this work.},
	url = {https://www.inderscience.com/offer.php?id=104378},
	author = {Saidi Abderazak and Naceri Farid}
}
@article {4750,
	title = {Super twisting sliding mode control for brushless doubly fed induction generator based on WECS, ISSN  0975-6809},
	journal = {International Journal of System Assurance Engineering and Management},
	volume = {volume 10},
	year = {2019},
	pages = {pp. 1145{\textendash}1157},
	abstract = {This paper deals with the robust power control of a grid-connected brushless doubly-fed induction generator (BDFIG) driven by the variable speed wind turbine. With the using of a super twisting algorithm which is a high-order sliding mode controller (HOSMC). This approach guarantees both the dynamic performance and the same robustness as traditional first order (SMC) algorithm and reduces the chattering phenomenon, which is the biggest disadvantage in the implementation of this technique. The developed algorithm relies on the decoupling control by implementing the strategy of oriented grid flux vector control. In order to enhance the desired performances, an attempt is made by controlling the generated stator active and reactive powers in a linear and decoupled manner to ensure the global asymptotical stability, HOSMC approach is implemented. Therefore, an optimal operation of the BDFIG in sub-synchronous operation is used in addition to the stator power flows where the stator power factor is kept in a unity. The suggested method is examined with the Matlab/Simulink software. The performances and the feasibility of the designed control are illustrated by simulation results.},
	url = {https://link.springer.com/article/10.1007/s13198-019-00844-3},
	author = {Moussa Oussama and Abdessemed Rachid and Benaggoune Said}
}
@article {4746,
	title = {Speed Control of a doubly fed induction Machine Based on Fuzzy Adaptive, ISSN / e-ISSN 1758-3657 / 1758-8723},
	journal = {International Journal Intelligent Engineering Informatics},
	volume = {volume 7},
	number = {N{\textdegree}1~},
	year = {2019},
	pages = {pp.61 - 76},
	abstract = {In this paper, we are interested in the adaptive fuzzy control a technique has been studied and applied, namely adaptive fuzzy control based on theory of Lyapunov. The system based on the stability theory is used to approximate the gains\&nbsp;ke\&nbsp;and\&nbsp;kdce\&nbsp;to ensure the stability of the control in particular time, simulations results obtained by using MATLAB environment gives that the fuzzy adaptive control more robust, also it has superior dynamics performances. The results and test of robustness will be presented.},
	url = {https://www.inderscience.com/info/inarticle.php?artid=97551},
	author = {Saidi Abderazak and Naceri Farid}
}
@article {4745,
	title = {Design of Robust Control using Fuzzy Logic Controller for Doubly Frd Induction Motor Drives, ISSN / e-ISSN 1454 / 234X},
	journal = {UPB Scientific Bulletin, Series A: Applied Mathematics and Physics},
	volume = {volume 81},
	number = { issue 1},
	year = {2019},
	abstract = {This paper presents a fuzzy logic controller destined to the doubly-fed induction motor (DFIM) speed controlling. It solves the problems associated with the conventional IP (Integral Proportional) controller. This fuzzy logic controller is based on the decoupling control to enhance robustness under different operating conditions such as load torque and in the presence of parameters variation. The simulation results for various scenarios show the high performances of the proposed control in terms of piloting effectiveness, precision, rapidity and stability for the high powers DFIM operating at variable speeds.},
	url = {https://www.researchgate.net/publication/332232682_DESIGN_OF_ROBUST_CONTROL_USING_FUZZY_LOGIC_CONTROLLER_FOR_DOUBLY-FED_INDUCTION_MOTOR_DRIVES},
	author = {Zidani Mohamed Yazid and Youb Lamia and Sebti Belkacem and Naceri Farid}
}
@article {4743,
	title = {Genetic Algorithm and Particle Swarm Optimization tuned fuzzy PID Controller on direct torque control of dual star induction motor, ISSN / e-ISSN 2095-2899 / 1993-0666 },
	journal = {Journal of Central South University},
	volume = {volume 26},
	number = {N{\textdegree}7},
	year = {2019},
	pages = {pp. 1886{\textendash}1896},
	abstract = {This study presents analysis, control and comparison of three hybrid approaches for the direct torque control (DTC) of the dual star induction motor (DSIM) drive. Its objective consists of combining three different heuristic optimization techniques including PID-PSO, Fuzzy-PSO and GA-PSO to improve the DSIM speed controlled loop behavior. The GA and PSO algorithms are developed and implemented into MATLAB. As a result, fuzzy-PSO is the most appropriate scheme. The main performance of fuzzy-PSO is reducing high torque ripples, improving rise time and avoiding disturbances that affect the drive performance.},
	url = {https://link.springer.com/article/10.1007/s11771-019-4142-3},
	author = {Ghoulemallah Boukhalfa and Belkacem Sebti and Chikhi Abdesselem and Benaggoune Said}
}
@proceedings {4729,
	title = {Characterization of Laminate Carbon Fibers Materials Using a New Multi-Coils Circular Eddy Current Sensor},
	journal = {The First International Conference on Materials, Environment, Mechanical and Industrial Systems (ICMEMIS{\textquoteright}19), 29-30 Juin 2019, University of Djelfa},
	year = {2019},
	url = {http://www.univ-djelfa.dz/icmemis19/},
	author = {Benhadda Nabil}
}
@article {4723,
	title = {Composite Material Characterization using Eddy Current by 3D FEM Associated with Iterative Technique, ISSN 2119-0275},
	journal = {Advanced Electromagnetics Journal (AEMJ)},
	volume = {volume 8},
	number = {N{\textdegree}1},
	year = {2019},
	abstract = {In this paper, an iterative technique, employing the T formulation associated with the finite element method, based on Maxwell{\textquoteright}s equations and the Biot-savart law, is used for analyzing the density of eddy currents in composite carbon fiber reinforced polymer (CFRP) materials. For this purpose, a code has been developed for solving an electromagnetic 3D non-destructive evaluation problem. This latter permits the characterization of this CFRP and determinate of fibers orientation using the impedance variation which is implanted in polar diagram. Firstly, the obtained results are compared with those of the analytical model. This comparison reveals a high concordance which proves the validity of the proposed method. Secondly, three different applications are shown for illustrating the characterization of unidirectional, bidirectional and multidirectional piece using a rectangular coil plotted in normalized impedance diagram.},
	url = {https://aemjournal.org/index.php/AEM/article/view/953},
	author = {Hachi Dahmane and Benhadda Nabil and Helifa Bachir and Lefkaier Ibn Khaldoun and Bachir Abdelhadi}
}
@article {4721,
	title = {Fictitious electric conductivity modelling of eddycurrent evaluation of magnetic materials, ISSN / e-ISSN 1058-9759 / 1477-2671},
	journal = {Nondestructive Testing and Evaluation},
	year = {2019},
	pages = {pp. 19-28 },
	abstract = {This paper presents a new modeling approach of eddy current nondestructive evaluation systems containing magnetic materials. Originally, the proposed model is based on coupled circuits principle and the notion of equivalent current density. In order to make the model homogenous, we consider the current density as a state variable since this density is compatible with the representation of the magnetisation by equivalent currents. By introducing the fictitious electric conductivity approach, the sensor impedance is expressed according to magnetic tube or plate characteristics such as electric conductivity and magnetic permeability. An excellent concordance is achieved by comparing the calculated results to those of analytical ones. Regarding the mesh simplicity and the fast calculation, this method is very adapted for the resolution of the inverse problems for real time evaluation of the properties of magnetic materials.},
	url = {https://www.tandfonline.com/doi/abs/10.1080/10589759.2019.1628958?journalCode=gnte20},
	author = {Tarik Bouchala and Aouf Anouaressadate and Bachir Abdelhadi and Benoudjit Azeddine}
}
@article {4720,
	title = {Development of Multi-Coils Circular Eddy Current Sensor for Characterization of Fibers Orientation and Defect Detection in Multidirectional CFRP Material, ISSN / e-ISSN 0934-9847 / 1432-2110},
	journal = {Research in Nondestructive Evaluation},
	year = {2019},
	abstract = {This article presents a study of a Multi-coils circular eddy current non-destructive testing sensor for determining the fibers orientation as well as the detection of defect in multidirectional carbon fibers reinforced polymer (CFRP). The developed sensor contains 16 rectangular coils connected in series and supplied by a single-phase sinusoidal source. This sensor allows the annulations of the mechanical rotation of the conventional sensors and it permits to reduce the inspection procedure duration. The electromagnetic phenomena are calculated by using 3D finite element method (FEM) based on the electromagnetic AV-A formulation. Finally, the Multi-coils circular sensor responses are analyzed through polar diagrams of the impedance variation, where the defect is taken into consideration. A great concordance between the obtained results and those of literatures has been noticed. The provided results show that the proposed sensor allows an efficient characterization of multidirectional CFRP and detection of defects in different layers.},
	url = {https://www.tandfonline.com/doi/abs/10.1080/09349847.2019.1645254?journalCode=urnd20},
	author = {Benhadda Nabil and Hachi Dahmane and Helifa Bachir and Lefkaier Ibn Khaldoun and Bachir Abdelhadi}
}
