@mastersthesis {5562,
	title = {Mod{\'e}lisation et Etude pour la R{\'e}alisation d\&rsquo;un Capteur {\`a} Courant de Foucault en Mode Diff{\'e}rentiel pour le Control non Destructif (CND)},
	year = {2015},
	author = {Benhadda Nabil}
}
@mastersthesis {5561,
	title = {D{\'e}veloppement d\&rsquo;algorithmes intelligents pour l\&rsquo;identification et la poursuite en temps r{\'e}els des param{\`e}tres {\'e}lectrom{\'e}caniques des machines asynchrones triphas{\'e}es},
	year = {2015},
	author = {Benlarbi Keltoum}
}
@mastersthesis {5560,
	title = {Contr{\^o}le non Destructif (CND) par Courants de Foucault, Mod{\'e}lisation 3D},
	year = {2015},
	author = {ZAOUI Mohammed Ridha}
}
@mastersthesis {5559,
	title = {Contr{\^o}le non Destructif (CND) par Courants de Foucault. Utilisation des Capteurs Magn{\'e}tiques {\`a} Tr{\`e}s Haute Sensibilit{\'e}},
	year = {2015},
	author = {AISSANI Nacereddine}
}
@mastersthesis {5551,
	title = {Effets des champs electromagn{\'e}tiques sur les etres vivants; etudes exp{\'e}rimentale primaire},
	year = {2015},
	author = {Saadi Bachir}
}
@mastersthesis {5528,
	title = {Contribution {\`a} la commande de la machine asynchrone, Analyse de la robustesse vis {\`a} vis des perturbations externes},
	year = {2015},
	author = {Bouhentala Abelmalik}
}
@mastersthesis {5525,
	title = {Etude Analytique et num{\'e}rique d\&$\#$39;un variateur {\'e}lectromagn{\'e}tique de vitesse},
	year = {2015},
	author = {SIDIALI Oussama}
}
@mastersthesis {5484,
	title = {Conception d\&rsquo;un Syst{\`e}me de R{\'e}cup{\'e}ration d\&rsquo;Energie pour la Traction Electrique Ferroviaire},
	year = {2015},
	author = {AMRAOUI Mohamed Nadjib}
}
@mastersthesis {5483,
	title = {La Conception d\&rsquo;un Syst{\`e}me de Traction Electrique Ferroviaire},
	year = {2015},
	author = {TAIBOUZA Salem}
}
@mastersthesis {5482,
	title = {Etude et dimensionnement d\&rsquo;un Syst{\`e}me de Stockage Associ{\'e} au Syst{\`e}me Eolien},
	year = {2015},
	author = {ADOUANE Fatima}
}
@mastersthesis {5481,
	title = {Etude et R{\'e}alisation d\&rsquo;un Hacheur en Pont H Associ{\'e} {\`a} une Machine {\`a} Courant Continu pour Syst{\`e}me de Traction Electrique Ferroviaire},
	year = {2015},
	author = {HAMOUTA Houssem Eddine}
}
@mastersthesis {5480,
	title = {Etude pour la Conception d\&rsquo;une Machine Asynchrone {\`a} Rotor Externe Destin{\'e}e {\`a} la Traction Electrique},
	year = {2015},
	author = {AISSI Souad}
}
@mastersthesis {5467,
	title = {Commande non lin{\'e}aire des capteurs. Application au Champ de Hassi Messaoud},
	year = {2015},
	author = {Aouadj Mounir}
}
@mastersthesis {5455,
	title = {Contribution {\`a} la Commande d\&$\#$39;un Syst{\`e}me Eolien Bas{\'e} sur une GADA},
	year = {2015},
	author = {BENAMAR Asma}
}
@mastersthesis {5453,
	title = {Etude Comparative entre le Foc et le DTC d\&$\#$39;une M.Asynchrone},
	year = {2015},
	author = {Dahmani rabah}
}
@mastersthesis {5452,
	title = {Mod{\'e}lisation et Simulation d\&$\#$39;un Convertisseur AC/DC.},
	year = {2015},
	author = {Sahraoui mohamed}
}
@mastersthesis {5451,
	title = {Minimisation des Pulsations du Couple dans une DTC d\&$\#$39;un MI},
	year = {2015},
	author = {GHETTOUT Fouzi}
}
@mastersthesis {5450,
	title = {Commande non Lin{\'e}aire de la Machine Synchrone},
	year = {2015},
	author = {Lemsara Alaa eddine}
}
@mastersthesis {5449,
	title = {Commande Floue de la Machine Asynchrone Double Etoile: Apport de la Commande Adaptative},
	year = {2015},
	author = {Mekerbeche Manar}
}
@mastersthesis {5448,
	title = {Commande par Mode Glissant de la Machine Asynchrone Double Etoile},
	year = {2015},
	author = {Bouezid Houda}
}
@mastersthesis {5447,
	title = {Commande Hybride: Logique Floue - Mode Glissant d\&$\#$39;un Moteur {\`a} Induction},
	year = {2015},
	author = {Dhimi Asma}
}
@article {4797,
	title = {Robust Induction motor Control using Indirect Adaptive Fuzzy Synergetic Control, ISSN 1582-4594},
	journal = {Journal of Electrical Engineering, Roumanie},
	volume = { Vol 12},
	number = {N{\textdegree}1},
	year = {2015},
	pages = {pp. 140-145},
	abstract = {A new control technique of an induction motor is undertaken through a robust approach tagged synergetic control. Like the sliding mode (SMC) approach the system state trajectories are forced to evolve on a designer chosen manifold according to performance specifications. But unlike SMC, synergetic control relies on a continuous control law thus preventing unwanted chattering to occur. Fuzzy sets are used to approximate unknown system functions and system stability conditions are derived.},
	author = {Medjbeur Lemya and Benaggoune Said}
}
@article {4794,
	title = {High Performance Speed of the Induction Motor Drives by the Predictive Control using Space Vector Modulation, ISSN 2230-9926},
	journal = {IJDR International Journal of Developpment  Research},
	volume = {Vol 5},
	number = {Issue 6},
	year = {2015},
	pages = {pp. 4645-4654},
	abstract = {This paper investigates the application of the generalized predictive control (GPC), in order to control the speed of the induction motor. This application is based on four main ideas :\&nbsp; reproducing decision basic mechanisms of human behaviour; the creation\&nbsp; of\&nbsp; an\&nbsp; anticipatory\&nbsp; effect\&nbsp; by\&nbsp; operation\&nbsp; of\&nbsp; the\&nbsp; path\&nbsp; to\&nbsp; follow\&nbsp; in\&nbsp; the\&nbsp; future;\&nbsp; defining\&nbsp; a\&nbsp; numerical\&nbsp; prediction\&nbsp; model; minimization of a quadratic criterion with finite horizon and the principle of receding horizon. The results proved that the induction motor with the MPC speed controller has superior transient response, and good robustness in face of uncertainties including load disturbance. Moreover, accurate tracking performance has been achieved.},
	url = {https://www.journalijdr.com/sites/default/files/issue-pdf/3168.pdf},
	author = {Djeghdali Lakhdar and Naceri Farid and Sebti Belkacem}
}
@article {4793,
	title = {SCADA System for the Modelling and Optomization of Oil Collecting Pipeline Network, ISSN 2040-7459},
	journal = {RJASET: Research journal Applied Sciences, Engineering\& Technology},
	volume = {10},
	number = {7 },
	year = {2015},
	pages = {pp. 789-804},
	abstract = {This study aims are data acquisition, control and online modeling of an oil collection pipeline network using a SCADA {\guillemotleft}Supervisory Control and Data Acquisition{\guillemotright} system, allowing the optimization of this network in real time by creating more exact models of onsite facilities. Indeed, fast development of computing systems makes obsolete usage of old systems for which maintenance became more and more expensive and their performances don{\textquoteright}t comply any more with modern company operations. SCADA system is a telemetry and control system adapted for particular requirements of an oilfield management. Thanks to its different functions, we take advantage of this system to solve production problems especially those related to oil collecting pipeline network. In fact this network is confronted to some problems, in particular pressure losses which has significant effect on the production. This problem can be taken under control by the awareness of pipeline network operation and all its process data (especially junctions) in real time. This will allow online creation of representative and accurate computerized models for the oil collecting pipeline network including producing wells, collecting pipelines, manifolds and others facilities.},
	url = {https://www.researchgate.net/publication/285429170_SCADA_System_for_the_Modeling_and_Optimization_of_Oil_Collecting_Pipeline_Network_A_Case_Study_of_Hassi_Messaoud_Oilfield},
	author = {Aouadj Mounir and Aouadj Mounir}
}
@article {4792,
	title = {A Novel DTC-SVM Associated with the Calculation of PI Regulator of the Induction machine, ISSN 2005-4238},
	journal = {AJST Asian Journal of Science and Technology},
	volume = {Volume 6},
	number = {Issue 4},
	year = {2015},
	pages = {pp. 1241-1247},
	abstract = {We present, in this paper, a DTC-SVM control algorithm of an induction machine based on PI controllers. Both the torque and the flux are regulated by a PI controller, where the truth table and the hysteresis are eliminated. We present here a conception method of the PI controllers, associated with the flux and the torque regulation loops and gives analytical formulas for the proportional and integral parameters, depending on the parameters of the induction machine. The effectiveness of the proposed approach is shown by simulation results.},
	url = {https://www.journalajst.com/sites/default/files/issues-pdf/2065.pdf},
	author = {Djeghdali Lakhdar and Naceri Farid and Sebti Belkacem}
}
@article {4787,
	title = {The Stable Algorithm Based on a Model Reference Adaptive Control for the Dual Star Machine Drive, ISSN 1582-4594},
	journal = {Journal of Electrical Engineering, Rouma},
	volume = {Volume 15},
	number = {N{\textdegree}4},
	year = {2015},
	abstract = {This paper deals with the design and a simulations study of a Model Reference Adaptive Control speed adaptive controller used for control Dual Star Induction Machine, The developed controller is designed in accordance with Lyapunov stability theory. The technique proposed gives fast dynamic response with no overshoot, the simulation results show that the control.},
	url = {https://www.researchgate.net/publication/301557217_The_stable_algorithm_based_on_a_Model_Reference_Adaptive_Control_for_the_Dual_Star_Induction_Machine_drives},
	author = {Laamayad tahar and Naceri Farid}
}
@article {4785,
	title = {Reducing of Torque and Flux Ripples DTC of IM Based on Predictive Control, ISSN 1582-4594},
	journal = {Journal of Electrical Engineering, Roumanie},
	volume = {Volume 16},
	number = {N{\textdegree}1},
	year = {2015},
	abstract = {We present in this paper a comparative study between two control strategies of electrical machines: Direct Torque Control (DTC-SVM), and Predictive Direct Torque Control (MPDTC). The first algorithm based on PI controllers, where the torque and the flux are regulated by a PI controller; we present a conception method of the PI controllers, associated with the flux and the torque regulation loops and gives analytical formulas for the proportional and integral gains. We also present in the second algorithm. The Predictive Direct Torque Control based on the linearization input-output of the machine. The technique of the linearization is used to give a model linearized and uncoupled from the machine for the anticipation of future behavior of the output. Following the formulation of both approaches, their implementation in the Matlab-Simulink environment has been treated. It has been found that the second approach MPDTC yields high dynamic performances in the whole speed range. These performances are characterized by a low torque ripple. However, requires much more CPU time than the first one.},
	url = {https://www.researchgate.net/publication/304887561_Reducing_of_torque_and_flux_ripples_in_DTC_of_im_based_on_predictive_control},
	author = {Djeghdali Lakhdar and Naceri Farid and Sebti Belkacem}
}
@proceedings {4775,
	title = {Computer Aided Design and Multiple Coupled Circuit Modelling of BDFM},
	journal = {3rd International Conference on  Control, Engineering \& Information Technology CEIT},
	year = {2015},
	pages = {pp. 1 - 6},
	abstract = {A general and efficient algorithmic implementation is presented for calculating of self and/or mutual inductances using winding function theory for any type of stator and/or rotor layout slot windings. Then, this algorithm is applied on brushless doubly fed induction machines with standard cage. In fact, several kinds of slot windings are treated to prove the efficiency of this technique. The procedure is provided with inputs vector consisted by the machine main dimensions, air gap length, stator and rotor slot numbers, pole pairs, slots per pole and phase and the winding slots sequence defining the winding kind. Consequently, the application of this procedure yields both self and mutual inductances matrix of the stator and the rotor as well as the stator-rotor mutual inductances curve and its derivative. Finally, a dynamic simulation with multiple coupled circuits modelling is carried out and the results are presented and discussed.},
	url = {http://ieeexplore.ieee.org/document/7233050/},
	author = {Chaouche Saad}
}
@article {4771,
	title = {New Contactless Eddy Current Non-destructive Methodology of Electric Conductivity Measurement, ISSn / e-ISSN 1058-9759 / 1477-2671},
	journal = {Nondestructive Testing and Evaluation },
	volume = {Volume 30},
	number = { Issue 1},
	year = {2015},
	pages = {pp. 63-73 },
	abstract = {In this paper, a new method of contactless electric conductivity measurement is developed. This method is essentially based on the association of the coupled electric field forward model, which we have recently developed, with a simple and efficient research algorithm. The proposed method is very fast because 1.3\&nbsp;s are sufficient to calculate electric conductivity, in a CPU of 2\&nbsp;GHz and RAM of 3\&nbsp;GB, for a starting research interval of 1.72{\textendash}17.2 \%IACS and tolerance of 1.72\&nbsp;{\texttimes}\&nbsp;10-\&nbsp;5 \%IACS. The study of the calculation time according to mesh density and starting interval width has showed that an optimal choice has to be made in order to improve the rapidity while preserving its precision. Considering its rapidity and its simplicity of implementation, this method is more adapted, in comparison to direct current techniques using Van der Pauw geometry, for automated applications.},
	url = {https://www.tandfonline.com/doi/abs/10.1080/10589759.2014.992431?journalCode=gnte20},
	author = {Bouchala Tarek and Bachir Abdelhadi and Benoudjit Azeddine}
}
@article {4770,
	title = {Application of Coupled Electric Field Method for Eddy Current non-Destructive Inspection of Multilayer Structures, ISSN / e-ISSN 1058-9759 / 1477-2671},
	journal = {Nondestructive Testing and Evaluation },
	volume = {Volume 30},
	number = { Issue 2},
	year = {2015},
	pages = {pp. 124-137},
	abstract = {The development of fast and accurate method describing the electromagnetic phenomena intervening in eddy current non-destructive systems is very interesting, since it permits the design of reliable systems permitting the detection and the characterisation of defect in conductive materials. The coupled electric field method presented in this article can assume a large part of these objectives, because it is fast in comparison to the finite element method and easily invertible since the sensor impedance variation is an explicit function of target physical and geometrical characteristics. These advantages have motivated us to extend this method for multilayered structures, very interesting in aeronautic industry, by superposing the inductive effects in different layers. The impedance of an absolute sensor operating above three conducting layers will be calculated and compared to those obtained with finite element method. Afterwards, we shall exploit the model to study the effect of defect characteristics on the sensor impedance. Furthermore, regarding to the depth penetration effect, we shall make into evidence the necessity of accomplishing an optimal choice of the exciting field frequency during the inspection of multilayered materials. The essential importance of this method, besides of its rapidity, resides in its possibility to be extended to 2D irregular and 3D asymmetric configurations.},
	url = {https://www.tandfonline.com/doi/abs/10.1080/10589759.2015.1018253},
	author = {Bouchala Tarek and Bachir Abdelhadi and Benoudjit Azeddine}
}
