@mastersthesis {5558,
	title = {Etude et Mod{\'e}lisation De Capteur A Courants de Foucault pour le Contr{\^o}le non Destructif},
	year = {2014},
	author = {SAFER Omar Adib}
}
@mastersthesis {5556,
	title = {Etude L\&rsquo;ensemble du Moteur Asynchrone-Onduleur de Tension Utilis{\'e} en Traction Electrique},
	year = {2014},
	author = {BEHISSA Mohammed Said}
}
@mastersthesis {5555,
	title = {Contr{\^o}le direct du couple d\&rsquo;un moteur {\`a} induction},
	year = {2014},
	author = {Guenniche Mahieddine}
}
@mastersthesis {5522,
	title = {Etude Analytique et Num{\'e}rique et Comparaison des Performances de diff{\'e}rentes Topologies de MRV VernierApplication en Variateur de vitesse Electromagn{\'e}tique et en traction Electrique},
	year = {2014},
	author = {KADA Youcef}
}
@mastersthesis {5521,
	title = {Etude analytique et num{\'e}rique d\&rsquo;un variateur de vitesse {\'e}lectromagn{\'e}tique},
	year = {2014},
	author = {OUELD TAYIB}
}
@mastersthesis {5517,
	title = {Etude et r{\'e}alisation des filtres du 2{\`e}me, application aux cellules du 2{\`e}me ordre a {\'e}tage amplificateur},
	year = {2014},
	author = {Guettala Nadia}
}
@mastersthesis {5516,
	title = {Etude des circuits PLL, application a la simulation des filtres},
	year = {2014},
	author = {Bedda Dia El Hak}
}
@mastersthesis {5494,
	title = {Contribution {\`a} l\&rsquo;Am{\'e}lioration des Performances Energ{\'e}tique de l\&rsquo;Association Machine Asynchrone-Convertisseur par les Techniques de l\&rsquo;Intelligence Artificielle},
	year = {2014},
	author = {ROUABEH Zineb}
}
@mastersthesis {5493,
	title = {D{\'e}veloppement de M{\'e}thodes Rapides pour la R{\'e}solution des Probl{\`e}mes Inverses dans les Syst{\`e}mes de CND par Courants de Foucault},
	year = {2014},
	author = {Bouchala Tarek}
}
@mastersthesis {5479,
	title = {Etude et dimensionnement d\&rsquo;un Syst{\`e}me de Stockage Associ{\'e} au Syst{\`e}me Eolien},
	year = {2014},
	author = {BOUCETTA Hamza}
}
@mastersthesis {5478,
	title = {Etude et Dimensionnement d\&rsquo;un Syst{\`e}me Hybride Photovolta{\"\i}que-Eolien Autonome avec Syst{\`e}me de Stockage Batteries d\&rsquo;Accumulateurs},
	year = {2014},
	author = {ABDENBI Hichem}
}
@mastersthesis {5477,
	title = {Etude d\&rsquo;une Motorisation {\`a} Courant Alternatif pour Syst{\`e}me de Traction Electrique Ferroviaire},
	year = {2014},
	author = {MELAS Abdelhadi}
}
@mastersthesis {5476,
	title = {Etude d\&rsquo;une Motorisation {\`a} Courant Continu pour Syst{\`e}me de Traction Electrique Ferroviaire Intelligent},
	year = {2014},
	author = {GHOUAIZI Houda}
}
@mastersthesis {5466,
	title = {Contribution {\`a} la commande d\&$\#$39;une machine asynchrone double {\'e}toile par mode glissant. Apport de la logique floue.},
	year = {2014},
	author = {Laamayad tahar}
}
@mastersthesis {5465,
	title = {Implantation des Lois de Commande d\&$\#$39;une MRV en vue d\&$\#$39;une Application Alterno-D{\'e}marreur Pilot{\'e}e par un sqysteme Dspace en Temps R{\'e}el},
	year = {2014},
	author = {Boudouda malik}
}
@mastersthesis {5454,
	title = {Commande d\&$\#$39;un Onduleur Neuf Niveaux destin{\'e} aux Fortes puissances PV},
	year = {2014},
	author = {ABOUB Hania}
}
@mastersthesis {5446,
	title = {Commande par DTC de la Machine Asynchrone},
	year = {2014},
	author = {Saifi Adel}
}
@mastersthesis {5445,
	title = {Commande Robuste d\&$\#$39;un Convertisseur Buck},
	year = {2014},
	author = {Meddour Amine}
}
@mastersthesis {5444,
	title = {Commande de la Machine Asynchrone Monophas{\'e}e par logique Floue},
	year = {2014},
	author = {Boukhentef Houssem Eddine}
}
@mastersthesis {5443,
	title = {Commande Vectorielle de la Machine Asynchrone Double Etoile},
	year = {2014},
	author = {Maaziz Souheil}
}
@proceedings {4826,
	title = {A comparative study of impact of electrical stress and thermal aging on transformer oil},
	journal = {11th International Multi-Conference on Systems, Signals \& Devices SSD;  Espagne 2014},
	year = {2014},
	url = {http://ieeexplore.ieee.org/document/6808905/},
	author = {Boudraa Saliha}
}
@article {4823,
	title = {Study of the Influence of Conductive Defect Characteristics on Eddy Current Differential Probe Signal, ISSN 1582-4594},
	journal = {Journal of Electrical Engineering},
	volume = {Volume 14},
	year = {2014},
	pages = { pp 350-357},
	abstract = {Nowadays, numerical modelling has become an interesting tool for determining impedance variations due to various conductive flaws in eddy current nondestructive evaluation systems. These kinds of defects, rarely treated in the published works, are taken into consideration in the modelling while introducing them as electrically conductive volumes with a finite electric resistivity. This step is very important since it permits to improve qualitatively several models developed so far by many authors whose consider the defect as loss of material only. However, in several applications, the defect can occur with a finite resistivity such as impurity, small burns and micro-solder. On the other hand, even though the defect appears with a loss of materials, som e polluting materials can fill the affected region. Indeed, the volume of the initial defect will be completely or partially occupied by these conducting pollutant materials. This paper deals with the effect of physical and geometrical characteristics of such kind of defects on the differential sensor response. Furthermore, the necessity of taking the defect electric conductivity (as an important parameter) into account will be explained, in order to develop a reliable and accurate inverse method allowing a full characterization of conductive defects.},
	url = {https://www.researchgate.net/publication/266854034_STUDY_OF_THE_INFLUENCE_OF_CONDUCTIVE_DEFECT_CHARACTERISTICS_ON_EDDY_CURRENT_DIFFERENTIAL_PROBE_SIGNAL},
	author = {Benhadda Nabil and Bouchala Tarek and Guettafi Amor and Bachir Abdelhadi}
}
@article {4821,
	title = {
	Artificial neural networks for predicting the gassing tendency under electrical discharge in insulating oil for extended time, ISSN 1582-4594

},
	journal = {Journal of Electrical Engineering},
	volume = {14},
	number = {2},
	year = {2014},
	pages = {pp 45-52},
	abstract = {This study will focus on the investigation of the effect of electrical discharge on physical, chemical, electrical properties of transformer oil, and on the development of a mathematical model describing the gassing of insulating oil under electrical discharge, using the information contained in the measured values. For predicting the gassing tendency for extensive ageing periods, we use the model developed, for an intelligent system design. The predictor{\textquoteright}s parameters are chosen based on their influence degree by the electrical field. Various scenarios were considered. The study was carried on two types of fluids, under electrical stress for different ages. The 6802, 6181 and 924 ASTM tests methods were used for the measurements of parameters in degradation. All the results obtained are summarized and compared. The properties which are strongly dependent have been specified, a multiple linear regression model for each fluid as a function of its DDP, DDF, turbidity and aging period is developed. This model is for the estimation of the gas quantity cumulated under electrical discharge. The prediction is made, by implanting the stepwise regression results into a neural network system, which has been tested on experimental results obtained from laboratory samples, and high prediction accuracy has been achieved.},
	url = {https://www.researchgate.net/publication/297361317_Artificial_neural_networks_for_predicting_the_gassing_tendency_under_electrical_discharge_in_insulating_oil_for_extended_time},
	author = {Boudraa Saliha and Mokhnache Leila}
}
@article {4812,
	title = {New approach for estimate parameters of machine asynchronous, ISSN / e-ISSN 2320\&ndash;3331 / 2278-1676},
	journal = {IOSR Journal of Electrical and Electronics Engineering},
	volume = {9},
	number = {3},
	year = {2014},
	pages = {pp. 28-32},
	abstract = {Rotating electrical machines play an important role in the industrial world. Among them, the three- phase squirrel cage asynchronous machines are frequently used because of their robustness, their relatively simple construction and their low cost. Nevertheless, during their lifespan, these machines are submitted to external and internal stresses which can lead to several failures. In this paper, we present the estimate of the parameters sensitive to the defects, namely the rotor currents and resistances of the rotor bars, by using the Extended Kalman filter.},
	url = {http://www.iosrjournals.org/iosr-jeee/Papers/Vol9-issue3/Version-4/E09342832.pdf},
	author = {Bouhantala Abdelmalik and Benbouza Mohamed Salah}
}
@article {4810,
	title = {Influence de la Longueur de Grille sur les Imp{\'e}dances d\&rsquo;entr{\'e}e et de sortie du Transistor Mesfet GaAs, ISSN 1112-9697},
	journal = {Revue des Sciences et de la Technologie},
	volume = {5},
	number = {1},
	year = {2014},
	abstract = {In information science such as computer, telecommunications, processing of the transmission of signals or images, the components field effect plays a role. Also we are interested in our study to field-effect transistor gate Schottky micron and submicron in gallium arsenide GaAs MESFET said. In this paper, we present the results of calculating the influence of gate length on input impedance and output transistor field effect Schottky barrier gallium arsenide GaAs MESFET said, this physical model is based on the analysis of two-dimensional Poisson equation in the active region under the gate. The theoretical simulation results based on analytical expressions that we have established above, are discussed and compared with those of the experiment },
	url = {http://193.194.69.34/rst2/images/vol5n1/5-018-benbouza.pdf},
	author = {Benbouza Med Salah and F. Z .Maalla and I. Sellaoui}
}
@proceedings {4807,
	title = {Direct Torque Control Sensor of PMSM with EKF Estimation of Speed and Load Torque Observer},
	journal = {16th International power Electronics and motin Control conference and Exposition PEMC},
	year = {2014},
	url = {http://www.pemc2014.org},
	author = {Benaggoune Said}
}
@proceedings {4800,
	title = {Design of Hybrid Controller by Fuzzy Sliding Mode for an Inuction Motor},
	journal = {International Conference on Control Engineering \& Information technology  CEIT },
	year = {2014},
	author = {Belkacem Sebti}
}
@proceedings {4799,
	title = {Contribution the predictive Control on The Minimization of the Cgattering the Torque and the Stator Flux of the Induction Machine},
	journal = {The Second International Conference on Electriacl Engineering and Control applications},
	year = {2014},
	url = {www.eaychair.org/conferences/conf-iceeca2014},
	author = {Djeghdali Lakhdar}
}
@article {4795,
	title = {Simulation and Determination of the Laws Control of the SRM for the integrated Starter Generator Aplication, ISSN 2278-4209},
	journal = {International journal of Electronics Communication and Computer Engineering},
	volume = {Vol 5},
	number = {Issue 3},
	year = {2014},
	pages = {pp. 644-649},
	abstract = {This paper deals with the design of an integrated starter generator system for a car flywheel based on the Switched Reluctance Machine (SRM) technology. First, we discuss about the starter generator problematic following the results of our bibliography research, and secondly, we briefly remained generalities about the SRM and the determination of the laws control. In addition, we designed the converter associated to the machine using (Matlab/Simulink) software in order to identify the laws control and to adapt to the operating modes (motor, generator, booster, brake). Finally, simulations of the open and closed loop model were performed on the converter with machine (SRM).},
	author = {Boudouda malik and Naceri Farid}
}
@article {4791,
	title = {A New Hybrid Controller by Fuzzy Sliding Mode for an Induction Motor, ISSN 1451-4869},
	journal = {IJIER International Journal of Engineering Innovation and Research},
	year = {2014},
	author = {Bendaas Ismail and Naceri Farid}
}
@article {4786,
	title = {Design of Hybrid Controller by Fuzzy Sliding Mode for an Induction Motor, ISSN  2328-2223},
	journal = {Revue des Sciences et de la Technologie - RST},
	volume = {Volume 5},
	number = {Issue 1},
	year = {2014},
	abstract = {This paper presents a synthesis of two control strategies, sliding mode (SMC) and hybrid fuzzy sliding mode control (FSMC) for application to an induction motor (IM) for more precisely, present a performance of fuzzy sliding mode control. To solve those problems associated with conventional control by sliding mode,such as high current, flux and torque chattering, variable switching fr e q u e n c y . Meanwhile, the design of a hybrid controller based on fuzzy sliding mode control (FSMC) is proposed, in which a fuzzy logic controller replaces the discontinuous part of the classical sliding mode control law. Simulations results of the proposed control theme present good dynamic and steady-state performances as compared to the classical SMC from aspects of the reduction of the torque chattering, the quickly dynamic torque response and robustness to disturbance.},
	url = {http://193.194.69.34/rst2/images/vol5n1/2-002-bendaas.pdf},
	author = {Bendaas Ismail and Naceri Farid}
}
@article {4784,
	title = {Improving Asynchrounous Motor Speed and Flux Loop Control bu using Hybrid Fuzzy-SMC Controllers, ISSN 1476-8186},
	journal = {International Journal of Automation and Computing},
	volume = {Volume 11},
	number = {Issue 4},
	year = {2014},
	pages = {pp.  361-367},
	abstract = {This paper presents a new method combining sliding mode control (SMC) and fuzzy logic control (FLC) to enhance the robustness and performance for a class of non-linear control systems. This fuzzy sliding mode control (FSMC) is developed for application in the area for controlling the speed and flux loops of asynchronous motors. The proposed control law can solve those problems associated with the conventional control by sliding mode control, such as high current, flux and torque chattering, variable switching frequency and variation of parameters, in which a robust fuzzy logic controller replaces the discontinuous part of the classical sliding mode control law. Simulation results of the proposed FSMC technique on the speed and flux rotor controllers present good dynamic and steady-state performances compared to the classical SMC in terms of reduction of the torque chattering, quick dynamic torque response and robustness to disturbance and variation of parameters.},
	url = {https://link.springer.com/article/10.1007/s11633-014-0801-x},
	author = {Bendaas Ismail and Naceri Farid and Sebti Belkacem}
}
@proceedings {4780,
	title = {Dimensionnement d\&rsquo;un Syst{\`e}me de Pompage Eolien dans un Site Isol{\'e}},
	journal = {Conf{\'e}rence Nationale~: Energie, Hydrocarbure et Environnement, 3-4 D{\'e}cembre 2014, Adrar, Alg{\'e}rie},
	year = {2014},
	author = {C. Ammari}
}
@article {4772,
	title = {Novel Coupled Electric Field Method for Defect Characterization in Eddy Current Non-Destructive Testing Systems, ISSN / e-ISSN 0195-9298 / 1573-4862},
	journal = {Journal of Nondestructive Evaluation},
	volume = {Volume 33},
	number = {Issue 1},
	year = {2014},
	pages = {pp. 1-11},
	abstract = {This article presents a defect modeling in eddy current non-destructive testing systems by using a new developed method called coupled electric field. It permits to improve qualitatively several models developed so far by many authors using coupled circuit methods that consider the defect only as loss of material. However, a defect can occur with a finite conductivity such as impurity, small burns and micro-solder. For this reason, this investigation consists of extending the coupled circuit method to the modeling of this kind of defects. The proposed approach consists of firstly considering the defect as an electric conductive volume and secondly changing the state variable presenting the electric current by the electric field one. This procedure permits expressing explicitly the impedance variation caused by the presence of an axi-symmetrical defect according to its characteristics. The comparison between the impedance variations calculated using finite elements method and the proposed one demonstrates a very good concordance. After this validation, the study covers also the influence of the defect shape and position on encircling probe impedance. This method is interesting since it permits a fully characterization of this kind of defects and facilitates the inversion process. Moreover, using a 3D finite element observation, this fast tool of simulation can be adapted for a fast phenomenological modeling of asymmetrical configurations.},
	url = {https://www.researchgate.net/publication/259007554_Novel_Coupled_Electric_Field_Method_for_Defect_Characterization_in_Eddy_Current_Non-destructive_Testing_Systems},
	author = {Bouchala Tarek and Bachir Abdelhadi and Benoudjit Azeddine}
}
