@proceedings {7075,
	title = {Fuzzy Logic Controller in a Speed Control for Doubly Fed Induction Machine (DFIM)},
	journal = { 2nd International Conference on Natural and Applied Science And Engineering (ICNASEN {\textendash} 2020)~ 21 {\textendash} 25 October },
	year = {2020},
	address = {ANTALYA, TURKEY},
	author = {Farid Naceri and A Saidi and Lamia YOUB}
}
@proceedings {4759,
	title = {New nanotechnology structures CNTFET GaAs},
	journal = {8th International Conference on Renewable Energy Research and Applications (ICRERA)},
	year = {2019},
	url = {https://www.icrera.org/},
	author = {Benbouza Med Salah}
}
@proceedings {4729,
	title = {Characterization of Laminate Carbon Fibers Materials Using a New Multi-Coils Circular Eddy Current Sensor},
	journal = {The First International Conference on Materials, Environment, Mechanical and Industrial Systems (ICMEMIS{\textquoteright}19), 29-30 Juin 2019, University of Djelfa},
	year = {2019},
	url = {http://www.univ-djelfa.dz/icmemis19/},
	author = {Benhadda Nabil}
}
@proceedings {4760,
	title = {Energy Optimization Nanotechnology Structures CNTFET GaAs},
	journal = {7th International Conference on Renewable Energy Research and Applications (ICRERA)},
	year = {2018},
	url = {https://ieeexplore.ieee.org/document/8566989}
}
@proceedings {4738,
	title = {Design of a controller Linear PID for the Wheels Slip Rate of Systems ABS},
	journal = {International conference on Electronics and Electrical Engineering IC3E-2018},
	year = {2018}
}
@proceedings {4737,
	title = {Power Quality Enhancement of Grid Connected Brushless Doubly Frd Induction Generator Using Sliding Mode Control},
	journal = {The Fourth International conference on Mechanics and Energy ICME{\textquoteright}2018},
	year = {2018},
	url = {http://www.icme.aicme.net}
}
@proceedings {4736,
	title = {A Fuzzy adaptive control of doubly fed induction machine (DFIM)},
	journal = {ICMIE 2018},
	year = {2018},
	url = {https://doi.org/10.1051/matecconf/2018},
	author = {Saidi Abderazek}
}
@proceedings {4727,
	title = {Study of the use of eddy currents for defect detection on U50 Rail},
	journal = {8th International Advances in Applied Physics \& Materials Science Congress and Exhibition Sentido Lykia Resort, Oludeniz Turkey, APMAS 24 - 30 April 2018},
	year = {2018},
	url = {www.apmascongress.org},
	author = {Aouf Anouaressadate}
}
@proceedings {4733,
	title = {Identification des formes des fissures par r{\'e}seaux de neurones artificiels dans un syst{\`e}me de CND par courants de Foucault},
	journal = {5{\`e}me Collogue de l{\textquoteright}Inductique, Universit{\'e} des Sciences et de la Technologie d{\textquoteright}Oran {\textendash}Mohamed Boudiaf, 13-14 D{\'e}cembre 2017},
	year = {2017},
	url = {https://www.univ-usto.dz/faculte/fac-electrique/index.php?option=com_users\&view=reset},
	author = {Chattouh Bensalah}
}
@proceedings {4732,
	title = {D{\'e}tection de D{\'e}laminage dans une Plaque en MCFC par Utilisation d\&$\#$39;un Capteur Multi-Bobine {\`a} Champ Magn{\'e}tique Tournant},
	journal = {5{\`e}me Collogue de l{\textquoteright}Inductique, Universit{\'e} des Sciences et de la Technologie d{\textquoteright}Oran {\textendash}Mohamed Boudiaf 13-14 D{\'e}cembre 2017},
	year = {2017},
	url = {https://www.univ-usto.dz/faculte/fac-electrique/index.php?option=com_users\&view=reset},
	author = {Lahrech Ahmed Chaouki}
}
@proceedings {4731,
	title = {Etude de la D{\'e}tection de D{\'e}fauts de Rail U50 par Courants de Foucault Non Destructifs},
	journal = {5{\`e}me Collogue de l{\textquoteright}Inductique, Universit{\'e} des Sciences et de la Technologie d{\textquoteright}Oran {\textendash}Mohamed Boudiaf, 13-14 D{\'e}cembre 2017},
	year = {2017},
	url = {https://www.univ-usto.dz/faculte/fac-electrique/index.php?option=com_users\&view=reset},
	author = {Aouf Anouaressadate}
}
@proceedings {4728,
	title = {Identification du Tenseur de Conductivit{\'e} Electrique d\&$\#$39;une Plaque en MCFC par Utilisation d\&$\#$39;un Capteur Multi-Bobine {\`a} Champ Magn{\'e}tique Tournant},
	journal = {NUMELEC 2017, 9{\`e}me Conf{\'e}rence Europ{\'e}enne sur les M{\'e}thodes Num{\'e}riques en Electromagn{\'e}tisme, 15-17 Novembre 2017, Paris, France},
	year = {2017},
	url = {https://numelec2017.sciencesconf.org},
	author = {Feliachi Mouloud}
}
@proceedings {4769,
	title = {The Combination Finite Element / Monte Carlo Collision for Gas Discharge Modeling},
	journal = {ICD{\textquoteright}2016 code 85439, Montpelier},
	year = {2016},
	author = {L. Zeghichi}
}
@proceedings {4768,
	title = {ANFIS Fault Severity Detection and Appropriate Maintenance for Transformer Oil Using Combined DGA Criteria},
	journal = {Euromaintenance Athenes},
	year = {2016},
	author = {S. Boudraa}
}
@proceedings {4761,
	title = {Simulation of a 2D Magnetics Drug Targenting Model},
	journal = {International Conference on Advances in Civil, Structural and Environmental Engineering ACSEE },
	year = {2016},
	url = {https://www.icrera.org/},
	author = {Bouhantala Abdelmalik}
}
@proceedings {4735,
	title = {Comparative study between sliding mode controller and fuzzy sliding mode controller in a speed control for doubly fed induction motor},
	journal = {2016 4th International conference on control engineering \& information technologfy (CEIT)},
	year = {2016},
	author = {Saidi Abderazek}
}
@proceedings {4775,
	title = {Computer Aided Design and Multiple Coupled Circuit Modelling of BDFM},
	journal = {3rd International Conference on  Control, Engineering \& Information Technology CEIT},
	year = {2015},
	pages = {pp. 1 - 6},
	abstract = {A general and efficient algorithmic implementation is presented for calculating of self and/or mutual inductances using winding function theory for any type of stator and/or rotor layout slot windings. Then, this algorithm is applied on brushless doubly fed induction machines with standard cage. In fact, several kinds of slot windings are treated to prove the efficiency of this technique. The procedure is provided with inputs vector consisted by the machine main dimensions, air gap length, stator and rotor slot numbers, pole pairs, slots per pole and phase and the winding slots sequence defining the winding kind. Consequently, the application of this procedure yields both self and mutual inductances matrix of the stator and the rotor as well as the stator-rotor mutual inductances curve and its derivative. Finally, a dynamic simulation with multiple coupled circuits modelling is carried out and the results are presented and discussed.},
	url = {http://ieeexplore.ieee.org/document/7233050/},
	author = {Chaouche Saad}
}
@proceedings {4826,
	title = {A comparative study of impact of electrical stress and thermal aging on transformer oil},
	journal = {11th International Multi-Conference on Systems, Signals \& Devices SSD;  Espagne 2014},
	year = {2014},
	url = {http://ieeexplore.ieee.org/document/6808905/},
	author = {Boudraa Saliha}
}
@proceedings {4807,
	title = {Direct Torque Control Sensor of PMSM with EKF Estimation of Speed and Load Torque Observer},
	journal = {16th International power Electronics and motin Control conference and Exposition PEMC},
	year = {2014},
	url = {http://www.pemc2014.org},
	author = {Benaggoune Said}
}
@proceedings {4800,
	title = {Design of Hybrid Controller by Fuzzy Sliding Mode for an Inuction Motor},
	journal = {International Conference on Control Engineering \& Information technology  CEIT },
	year = {2014},
	author = {Belkacem Sebti}
}
@proceedings {4799,
	title = {Contribution the predictive Control on The Minimization of the Cgattering the Torque and the Stator Flux of the Induction Machine},
	journal = {The Second International Conference on Electriacl Engineering and Control applications},
	year = {2014},
	url = {www.eaychair.org/conferences/conf-iceeca2014},
	author = {Djeghdali Lakhdar}
}
@proceedings {4780,
	title = {Dimensionnement d\&rsquo;un Syst{\`e}me de Pompage Eolien dans un Site Isol{\'e}},
	journal = {Conf{\'e}rence Nationale~: Energie, Hydrocarbure et Environnement, 3-4 D{\'e}cembre 2014, Adrar, Alg{\'e}rie},
	year = {2014},
	author = {C. Ammari}
}
@proceedings {4829,
	title = {Utilisation de la M{\'e}thode de Monte Carlo l\&rsquo;Etude d\&rsquo;Une D{\'e}charge Electrique dans l\&rsquo;Oxyg{\`e}ne},
	journal = {The INTERNATIONAL CONFERENCE ON ELECTRONICS \& OIL  OURGLA},
	year = {2013},
	author = {L. Zeghichi and Mokhnache Leila and M. Djebabra}
}
@proceedings {4828,
	title = {Experimental Technique for Ameliorate  The Properties of Transformer Oil BORAK 22 In Service},
	journal = {Fourth International Meeting On Dielectric Materials IMDM4 Marrakech, Morocco},
	year = {2013},
	url = {http://docplayer.fr/2704104-Fourth-international-meeting-on-dielectric-materials-marrakech-morocco-29-31-may-2013.html},
	author = {Boudraa Saliha and Mokhnache Leila and B. Saidat and I. Fofana and Y. Hadjaj}
}
@proceedings {4825,
	title = {The Monte Carlo Method for the Study of an Electrical Discharge},
	journal = {ICSD2013, IEEE, Bologna-Italy},
	year = {2013},
	url = {http://ieeexplore.ieee.org/document/6619673/},
	author = {L. Zeghichi}
}
@proceedings {4805,
	title = {Analysis the Fault detection under Constraint of Command},
	journal = {International Conference on Control Engineering and Information Technology CEIT{\textquoteright}13},
	year = {2013},
	url = {http://fr.scribd.com/doc},
	author = {Benaggoune Said}
}
@proceedings {4804,
	title = {A Fuzzy Adaptive Control  for Double Stator Induction Motor Drives.},
	journal = {from theory to applications - Ouargla - The international conference on electronics  \&oil},
	year = {2013},
	author = {Laamayad tahar}
}
@proceedings {4803,
	title = {Simulation and Determination of the laws Control of the SRM for the Integrated Starter Generator Application},
	journal = {International Conference on Industrial Engineering and Operations Management},
	year = {2013},
	author = {Boudouda malik}
}
@proceedings {4776,
	title = {Fuzzy Efficiency Enhancement of Induction Motor Drive},
	journal = { Fourth International Conference on Power Engineering, Energy and Electrical Drives (POWERENG)},
	year = {2013},
	pages = {pp. 175 {\textendash} 180},
	url = {http://ieeexplore.ieee.org/document/6635602/},
	author = {Rouabah Zineb}
}
@proceedings {4827,
	title = {Artificial Intelligence for Diagnostic Systems Insulations in Power System Insulation},
	journal = {Women in Computer Workshop, NYU, Abu Dhabi 2012},
	year = {2012},
	url = {http://nyuad.nyu.edu/en/news-events/conferences/women-in-computing/2012-women-in-computing/2012-program.html},
	author = {Mokhnache Leila}
}
@proceedings {4817,
	title = {Influence de la Longueur de Grille sur les Imp{\'e}dances d\&rsquo;entr{\'e}e et de sortie du Transistor Mesfet GaAs},
	journal = {7th International Conference on Electrical Engineering},
	year = {2012},
	author = {Benbouza Mohamed Salah}
}
@proceedings {4816,
	title = {Influence of gate length on input impedance and output of GaAs MESFET transistors},
	journal = {Fifth Saudi Science Conference},
	year = {2012},
	author = {Benbouza Mohamed Salah}
}
@proceedings {4815,
	title = {Mod{\'e}lisation et Analyse du Fonctionnement d\&rsquo;un Moteur Pi{\'e}zo-Electrique {\`a} Onde Progressive},
	journal = {International Conference on electrical engineering},
	year = {2012},
	author = {Boussad Abdelhakim}
}
@proceedings {4808,
	title = {Evaluation de l\&$\#$39;Effet de la Congestion sur le Cout de Production},
	journal = {7th International Conference on Electrical Engineering CEE},
	year = {2012},
	url = {www.cee2012.com},
	author = {Benaggoune Said}
}
@proceedings {4806,
	title = {Optimal Management of Hydropower System},
	journal = {CSM8-ISM International Conference },
	year = {2012},
	url = {http://esm-lb.com/index.php/},
	author = {Benaggoune Said}
}
@proceedings {4802,
	title = {La double DTC d\&rsquo;une  Machine Asynchrone {\`a} Double  Alimentation},
	journal = {CEE{\textquoteright}2012 Batna - 7th International Conference on Electrical Engineering},
	year = {2012},
	author = {Boumaaraf Farid}
}
@proceedings {4778,
	title = {Comparaison de deux M{\'e}thodes d\&rsquo;Evaluation du Rendement d\&rsquo;une machine asynchrone},
	journal = { 7{\`e}me Conf{\'e}rence International en G{\'e}nie Electrique CEE  Universit{\'e} de Batna, Batna, Alg{\'e}rie},
	year = {2012},
	pages = { pp. 267-271},
	author = {S. Chakroun}
}
@proceedings {4777,
	title = {Design and Optimization of Axial Flux Permanent Magnet DC Machines with Double Air-Gap},
	journal = {7{\`e}me Conf{\'e}rence International en G{\'e}nie Electrique CEE  Universit{\'e} de Batna, Batna, Alg{\'e}rie},
	year = {2012},
	pages = { pp. 261-265},
	author = {M. Bendib}
}
@proceedings {4801,
	title = {Fuzzy adaptive approach for control the dual star induction machine DSIM},
	journal = {CIAM{\textquoteright}11 Oran. - International Conference on Automation and Machatronics },
	year = {2011},
	author = {Laamayad tahar}
}
@proceedings {4779,
	title = {Conception Optimale d\&rsquo;une Machine Synchrone {\`a} Aimants Permanents {\`a} Rotor Externe},
	journal = {Journ{\'e}es Nationales sur la Conception et l{\textquoteright}Optimisation en Electrotechnique,  JNCOE{\textquoteright}2011, Jijel, Alg{\'e}rie},
	year = {2011},
	author = {A. Chibani}
}
