@proceedings {7075,
	title = {Fuzzy Logic Controller in a Speed Control for Doubly Fed Induction Machine (DFIM)},
	journal = { 2nd International Conference on Natural and Applied Science And Engineering (ICNASEN {\textendash} 2020)~ 21 {\textendash} 25 October },
	year = {2020},
	address = {ANTALYA, TURKEY},
	author = {Farid Naceri and A Saidi and Lamia YOUB}
}
@article {7074,
	title = {Robust Wheel Slip for Vehicle Anti-lock Braking System with Fuzzy Sliding Mode Controller (FSMC)},
	journal = {Engineering, Technology \& Applied Science Research},
	volume = {10},
	number = {5},
	year = {2020},
	pages = {6368-6373},
	abstract = {
	Anti-lock Braking System (ABS) is used in automobiles to prevent slipping and locking of wheels after the brakes are applied. Its control is a rather complicated problem due to its strongly nonlinear and uncertain characteristics. The aim of this paper is to investigate the wheel slip control of the ground vehicle, comprising two new strategies. The first strategy is the Sliding Mode Controller (SMC) and the second one is the Fuzzy Sliding Mode Controller (FSMC), which is a combination of fuzzy logic and sliding mode, to ensure the stability of the closed-loop system and remove the chattering phenomenon introduced by classical sliding mode control. The obtained simulation results reveal the efficiency of the proposed technique for various initial road conditions.

},
	url = {https://etasr.com/index.php/ETASR/article/view/3830},
	author = {S LATRECHE and Said Benaggoune}
}
@article {7073,
	title = {Neuro-fuzzy Sliding Mode Controller Based on a Brushless Doubly Fed Induction Generator},
	journal = {IJE TRANSACTIONS B: Applications },
	volume = {33},
	number = {2},
	year = {2020},
	pages = {248-256},
	abstract = {
	The combination of neural networks and fuzzy controllers is considered as the most efficient approach for different functions approximation, and indicates their ability to control nonlinear dynamical systems. This paper presents a hybrid control strategy called Neuro-Fuzzy Sliding Mode Control (NFSMC) based on the Brushless Doubly fed Induction Generator (BDFIG). This replaces the sliding surface of the control to exclude chattering phenomenon caused by the discontinuous control action. This technique offers attractive features, such as robustness to parameter variations. Simulations results of 2.5 KW BDFIG have been presented to validate the effectiveness and robustness of the proposed approach in the presence of uncertainties with respect to vector control (VC) and sliding mode control (SMC). We compare the static and dynamic characteristics of the three control techniques under the same operating conditions and in the same simulation configuration. The proposed controller schemes (NFSMC) are effective in reducing the ripple of active and reactive powers, effectively suppress sliding-mode chattering and the effects of parametric uncertainties not affecting system performance.

},
	url = {https://www.ije.ir/article_103373.html},
	author = {Ouada, L and Benaggounea, Said and Sebti Belkacem}
}
@article {7070,
	title = {Hybrid Fuzzy Reference Signal Tracking Control of a Doubly Fed Induction Generator},
	journal = {International Journal of Engineering (IJE)},
	volume = {33},
	number = {4},
	year = {2020},
	pages = {567-574},
	abstract = {
	This paper presents a hybrid scheme for the control of active and reactive powers using the direct vector control with stator flux orientation (SFO) of the DFIG. The hybrid scheme consists of Fuzzy logic, Reference Signal Tracking (F-RST) controllers. The proposed (F-RST) controller is compared with the classical Proportional-Integral (PI) and the Polynomial (RST) based on the pole placement theory. The various strategies are analyzed and compared in terms of tracking, robustness, and sensitivity to the speed variation. Simulations are done using MATLAB software. The simulation results prove that the proposed approach leads to good performances such as the tracking test, the rejection of disturbances and the robustness concerning the parameter variations. The hybrid controller is much more efficient compared to those of PI and RST controller, it also improves the performance of the powers and ensures some important strength despite the parameter variation of the DFIG.

},
	url = {https://www.ije.ir/article_106029.html},
	author = {N. Choug}
}
@article {7069,
	title = {Hybrid Fuzzy Reference Signal Tracking Control of a Doubly Fed Induction Generator},
	journal = {International Journal of Engineering (IJE)},
	volume = {33},
	number = {4},
	year = {2020},
	pages = {567-574},
	abstract = {
	This paper presents a hybrid scheme for the control of active and reactive powers using the direct vector control with stator flux orientation (SFO) of the DFIG. The hybrid scheme consists of Fuzzy logic, Reference Signal Tracking (F-RST) controllers. The proposed (F-RST) controller is compared with the classical Proportional-Integral (PI) and the Polynomial (RST) based on the pole placement theory. The various strategies are analyzed and compared in terms of tracking, robustness, and sensitivity to the speed variation. Simulations are done using MATLAB software. The simulation results prove that the proposed approach leads to good performances such as the tracking test, the rejection of disturbances and the robustness concerning the parameter variations. The hybrid controller is much more efficient compared to those of PI and RST controller, it also improves the performance of the powers and ensures some important strength despite the parameter variation of the DFIG.

},
	url = {https://www.ije.ir/article_106029.html},
	author = {N. Choug and Said Benaggoune and Sebti Belkacem}
}
@article {7063,
	title = {Two Types of Fuzzy Logic Controllers for the Speed Control of the Doubly-Fed Induction Machine},
	journal = {Advances in Electrical and Computer Engineering},
	volume = {20},
	number = {3},
	year = {2020},
	abstract = {
	The paper presents two fuzzy logic control algorithms: type-1 and type-2. These two nonlinear techniques are used for adjust the speed control with a direct stator flux orientation control of a doubly fed induction motor. The effectiveness of the proposed control strategy is evaluated under different operating conditions such as of reference speed and for load torque step changes at nominal parameters and in the presence of parameter variation (stator resistance, rotor resistance and moment of inertia). The results of the simulation of the doubly fed induction motor velocity control have shown that fuzzy type-2 ensures better dynamic performances with respect to fuzzy type-1 control, even by parametric variations and external disturbances.

},
	url = {http://staff.univ-batna2.dz/sites/default/files/naceri_farid/files/aece_2020_3_8.pdf},
	author = {SAIDI, Abderazak and Farid Naceri and Lamia YOUB and Mihai CERNAT and Luis Guasch PESQUER}
}
@article {4755,
	title = {Three Level Inverter Based Unified Power Flow Controller, ISSN 1755-6398},
	journal = {International Journal of Power Electronics},
	volume = {11},
	number = {2},
	year = {2020},
	pages = {195 - 210},
	abstract = {
	Unified power flow controller is a power electronics-based device utilised to improve transmission line capacity and control power flow transmitted by power transmission systems. This paper presents the application of the decoupled control strategy to control independently active and reactive power in the event of changes in the step points of the powers. Two types of controllers are used to handle the control strategy proposed: conventional PI regulator and fuzzy logic PI regulator. The fuzzy logic controller must have high performance to handle the problem of adjustment of power decoupling. Also, a three level neutral point controller inverter is used in both series and shunt parts of the UPFC to get multistep voltage wave and improve the power quality.

},
	url = {https://www.inderscience.com/info/inarticle.php?artid=105148},
	author = {Berrahal, Khoukha and Bouhentala, Abd El Malik and Bensalem, Ahmed}
}
@mastersthesis {5548,
	title = {Contribution au contr{\^o}le de la machine synchrone double {\'e}toile},
	year = {2019},
	author = {Laggoune Louanasse}
}
@mastersthesis {5543,
	title = {{\'E}tude et R{\'e}alisation d\&$\#$39;un Banc D\&$\#$39;essai D{\'e}die aux Applications du Contr{\^o}le Non Destructif par Courants de Foucault},
	year = {2019},
	author = {AOUFI Mahfoud and KHODJA Lakhdar}
}
@mastersthesis {5542,
	title = {Contr{\^o}le Non Destructif par Flux de Fuite Magn{\'e}tique Appliqu{\'e} aux Pi{\`e}ces Ferromagn{\'e}tiques},
	year = {2019},
	author = {KHEBAL Merwane and DALI Abderrahmane}
}
@mastersthesis {5541,
	title = {Commande Directe du Couple de la Machine Asynchrone Double Etoile(MASDE)},
	year = {2019},
	author = {Bettyeb Souhyla and Belaidi Kaoutar}
}
@mastersthesis {5535,
	title = {Commande vectorielle de la machine asynchrone par un r{\'e}gulateur PI},
	year = {2019},
	author = {ZAHAL Farid}
}
@mastersthesis {5532,
	title = {Faults Diagnosis of Turbo-Generator using Artificial Intelligence},
	year = {2019},
	author = {SADI.M.A}
}
@mastersthesis {5529,
	title = {Outils de diagnostic des transformateurs de puissance},
	year = {2019},
	author = {SAHTAL Rabeh and TOUCHEN. H}
}
@mastersthesis {5508,
	title = {Conception, {\'e}tude et r{\'e}alisation d\&$\#$39;un syst{\`e}me de positionnement},
	year = {2019},
	author = {KHERCHOUCHE Abdelmalik and MEDOUR Abdelhalim}
}
@mastersthesis {5507,
	title = {Etude et mod{\'e}lisation num{\'e}rique d\&$\#$39;une machine {\`a} courant continu sans balais},
	year = {2019},
	author = {MOHAMED CHERIF Siham}
}
@mastersthesis {5506,
	title = {Role de la compensation de l\&$\#$39;{\'e}nergie r{\'e}active dans la stabilit{\'e} des r{\'e}seaux {\'e}lectriques},
	year = {2019},
	author = {CHERRAF Fatih}
}
@mastersthesis {5497,
	title = {Influence des variateurs de vitesse sur la qualit{\'e} de l\&$\#$39;{\'e}nergie {\'e}lectrique},
	year = {2019},
	author = {AOURRA Med Lamine}
}
@mastersthesis {5435,
	title = {Contribution  {\`a} la commande d\&$\#$39;un MADA . Apport des techniques de l\&$\#$39;intelligence artificielle},
	year = {2019},
	author = {ZIDANI  Med yazid}
}
@mastersthesis {5424,
	title = {Contr{\^o}le adaptatif de la machine synchrone {\`a} aimants permanents},
	year = {2019},
	author = {DRID Hamza}
}
@mastersthesis {5423,
	title = {Commande par mode glissant de la machine synchrone {\`a} aimants permanents},
	year = {2019},
	author = {ZEMACHE  Abderahmane}
}
@mastersthesis {5414,
	title = {Commande vectorielle de la machine synchrone {\`a} aimants permanents},
	year = {2019},
	author = {KHERCHOUCHE  Khaled}
}
@mastersthesis {5413,
	title = {Commande asynchrone d\&$\#$39;une machine asynchrone double {\'e}toile},
	year = {2019},
	author = {BOUSLIMANI  Souhila}
}
@mastersthesis {5412,
	title = {Commande par DTC de la GADA},
	year = {2019},
	author = {DJOUALA  Imane}
}
@mastersthesis {5411,
	title = {Contr{\^o}le par d{\'e}couplage de la MSAP},
	year = {2019},
	author = {DERRADJI Med Lamine}
}
@mastersthesis {5410,
	title = {Commande de la machine asynchrone par Mode de glissement},
	year = {2019},
	author = {MADACI  Riad}
}
@mastersthesis {5409,
	title = {Commande hybride floue-glissant de la machine {\`a} induction},
	year = {2019},
	author = {ZITOUNI Amel}
}
@mastersthesis {5391,
	title = {La maintenance d\&rsquo;une turbine {\`a} gaz par la m{\'e}thode de Weinbull},
	year = {2019},
	author = {MAMOUNI mohamed and GHIOUB Aziz}
}
@mastersthesis {5390,
	title = {La maintenance des syst{\`e}mes hydrauliques et pneumatiques},
	year = {2019},
	author = {KERKEB Adel and DIBAOUI Mohamed}
}
@mastersthesis {5388,
	title = {R{\'e}alisation d\&$\#$39;une Maquette P{\'e}dagogique d\&$\#$39;un Syst{\`e}me Hybride Eolien Photovoltaique},
	year = {2019},
	author = {KHETTACHE Ramzeddine and MECHENANE Farouk}
}
@mastersthesis {5387,
	title = {Etude d\&$\#$39;une Batterie Solaire},
	year = {2019},
	author = {RAHAMINE Fayrouze}
}
@mastersthesis {5386,
	title = {Etude d\&$\#$39;un Volant d\&$\#$39;Inertie},
	year = {2019},
	author = {RAZI Ilhem}
}
@mastersthesis {5372,
	title = {Impl{\'e}mentation de l\&rsquo;Identification et de la Commande Num{\'e}riques d\&rsquo;un Moteur {\`a} Courant Continu {\`a} base d\&rsquo;Arduino-Matlab/Simulink},
	year = {2019},
	author = {BERTAL Imane}
}
@article {4766,
	title = {Hybrid fuzzy second order sliding mode control speed for Direct torque Control of Dual Star Induction motor, ISSN 1112-9867},
	journal = {Journal of Fundamental and Applied Sciences},
	year = {2019},
	author = {B. Kiyyour and D. Naimi and A. Salhi and Laggoune Louanasse}
}
@proceedings {4759,
	title = {New nanotechnology structures CNTFET GaAs},
	journal = {8th International Conference on Renewable Energy Research and Applications (ICRERA)},
	year = {2019},
	url = {https://www.icrera.org/},
	author = {Benbouza Med Salah}
}
@article {4752,
	title = {A New robust adaptive fuzzy synergetic control for nonlinear systems with an application to an inverted pendulum, ISSN / e-ISSN 1746-6172 / 1746-6180},
	journal = { International Journal of Modelling Identification and Control },
	volume = {volume 33},
	number = {N{\textdegree}2},
	year = {2019},
	abstract = {This paper deals with a nonlinear adaptive control design based on synergetic control, which also uses fuzzy systems to approximate the dynamics of nonlinear systems. The stability of the closed-loop system is ensured by the Lyapunov synthesis in the sense that all the signals are bounded, and the controller parameters adjusted by adaptation laws. The proposed algorithm is applied to an inverted pendulum to track a sinusoidal reference trajectory. Simulations and discussion are presented to illustrate the new robust adaptive fuzzy synergetic control described in this work.},
	url = {https://www.inderscience.com/offer.php?id=104378},
	author = {Saidi Abderazak and Naceri Farid}
}
@article {4750,
	title = {Super twisting sliding mode control for brushless doubly fed induction generator based on WECS, ISSN  0975-6809},
	journal = {International Journal of System Assurance Engineering and Management},
	volume = {volume 10},
	year = {2019},
	pages = {pp. 1145{\textendash}1157},
	abstract = {This paper deals with the robust power control of a grid-connected brushless doubly-fed induction generator (BDFIG) driven by the variable speed wind turbine. With the using of a super twisting algorithm which is a high-order sliding mode controller (HOSMC). This approach guarantees both the dynamic performance and the same robustness as traditional first order (SMC) algorithm and reduces the chattering phenomenon, which is the biggest disadvantage in the implementation of this technique. The developed algorithm relies on the decoupling control by implementing the strategy of oriented grid flux vector control. In order to enhance the desired performances, an attempt is made by controlling the generated stator active and reactive powers in a linear and decoupled manner to ensure the global asymptotical stability, HOSMC approach is implemented. Therefore, an optimal operation of the BDFIG in sub-synchronous operation is used in addition to the stator power flows where the stator power factor is kept in a unity. The suggested method is examined with the Matlab/Simulink software. The performances and the feasibility of the designed control are illustrated by simulation results.},
	url = {https://link.springer.com/article/10.1007/s13198-019-00844-3},
	author = {Moussa Oussama and Abdessemed Rachid and Benaggoune Said}
}
@article {4746,
	title = {Speed Control of a doubly fed induction Machine Based on Fuzzy Adaptive, ISSN / e-ISSN 1758-3657 / 1758-8723},
	journal = {International Journal Intelligent Engineering Informatics},
	volume = {volume 7},
	number = {N{\textdegree}1~},
	year = {2019},
	pages = {pp.61 - 76},
	abstract = {In this paper, we are interested in the adaptive fuzzy control a technique has been studied and applied, namely adaptive fuzzy control based on theory of Lyapunov. The system based on the stability theory is used to approximate the gains\&nbsp;ke\&nbsp;and\&nbsp;kdce\&nbsp;to ensure the stability of the control in particular time, simulations results obtained by using MATLAB environment gives that the fuzzy adaptive control more robust, also it has superior dynamics performances. The results and test of robustness will be presented.},
	url = {https://www.inderscience.com/info/inarticle.php?artid=97551},
	author = {Saidi Abderazak and Naceri Farid}
}
@article {4745,
	title = {Design of Robust Control using Fuzzy Logic Controller for Doubly Frd Induction Motor Drives, ISSN / e-ISSN 1454 / 234X},
	journal = {UPB Scientific Bulletin, Series A: Applied Mathematics and Physics},
	volume = {volume 81},
	number = { issue 1},
	year = {2019},
	abstract = {This paper presents a fuzzy logic controller destined to the doubly-fed induction motor (DFIM) speed controlling. It solves the problems associated with the conventional IP (Integral Proportional) controller. This fuzzy logic controller is based on the decoupling control to enhance robustness under different operating conditions such as load torque and in the presence of parameters variation. The simulation results for various scenarios show the high performances of the proposed control in terms of piloting effectiveness, precision, rapidity and stability for the high powers DFIM operating at variable speeds.},
	url = {https://www.researchgate.net/publication/332232682_DESIGN_OF_ROBUST_CONTROL_USING_FUZZY_LOGIC_CONTROLLER_FOR_DOUBLY-FED_INDUCTION_MOTOR_DRIVES},
	author = {Zidani Mohamed Yazid and Youb Lamia and Sebti Belkacem and Naceri Farid}
}
@article {4743,
	title = {Genetic Algorithm and Particle Swarm Optimization tuned fuzzy PID Controller on direct torque control of dual star induction motor, ISSN / e-ISSN 2095-2899 / 1993-0666 },
	journal = {Journal of Central South University},
	volume = {volume 26},
	number = {N{\textdegree}7},
	year = {2019},
	pages = {pp. 1886{\textendash}1896},
	abstract = {This study presents analysis, control and comparison of three hybrid approaches for the direct torque control (DTC) of the dual star induction motor (DSIM) drive. Its objective consists of combining three different heuristic optimization techniques including PID-PSO, Fuzzy-PSO and GA-PSO to improve the DSIM speed controlled loop behavior. The GA and PSO algorithms are developed and implemented into MATLAB. As a result, fuzzy-PSO is the most appropriate scheme. The main performance of fuzzy-PSO is reducing high torque ripples, improving rise time and avoiding disturbances that affect the drive performance.},
	url = {https://link.springer.com/article/10.1007/s11771-019-4142-3},
	author = {Ghoulemallah Boukhalfa and Belkacem Sebti and Chikhi Abdesselem and Benaggoune Said}
}
@proceedings {4729,
	title = {Characterization of Laminate Carbon Fibers Materials Using a New Multi-Coils Circular Eddy Current Sensor},
	journal = {The First International Conference on Materials, Environment, Mechanical and Industrial Systems (ICMEMIS{\textquoteright}19), 29-30 Juin 2019, University of Djelfa},
	year = {2019},
	url = {http://www.univ-djelfa.dz/icmemis19/},
	author = {Benhadda Nabil}
}
@article {4723,
	title = {Composite Material Characterization using Eddy Current by 3D FEM Associated with Iterative Technique, ISSN 2119-0275},
	journal = {Advanced Electromagnetics Journal (AEMJ)},
	volume = {volume 8},
	number = {N{\textdegree}1},
	year = {2019},
	abstract = {In this paper, an iterative technique, employing the T formulation associated with the finite element method, based on Maxwell{\textquoteright}s equations and the Biot-savart law, is used for analyzing the density of eddy currents in composite carbon fiber reinforced polymer (CFRP) materials. For this purpose, a code has been developed for solving an electromagnetic 3D non-destructive evaluation problem. This latter permits the characterization of this CFRP and determinate of fibers orientation using the impedance variation which is implanted in polar diagram. Firstly, the obtained results are compared with those of the analytical model. This comparison reveals a high concordance which proves the validity of the proposed method. Secondly, three different applications are shown for illustrating the characterization of unidirectional, bidirectional and multidirectional piece using a rectangular coil plotted in normalized impedance diagram.},
	url = {https://aemjournal.org/index.php/AEM/article/view/953},
	author = {Hachi Dahmane and Benhadda Nabil and Helifa Bachir and Lefkaier Ibn Khaldoun and Bachir Abdelhadi}
}
@article {4721,
	title = {Fictitious electric conductivity modelling of eddycurrent evaluation of magnetic materials, ISSN / e-ISSN 1058-9759 / 1477-2671},
	journal = {Nondestructive Testing and Evaluation},
	year = {2019},
	pages = {pp. 19-28 },
	abstract = {This paper presents a new modeling approach of eddy current nondestructive evaluation systems containing magnetic materials. Originally, the proposed model is based on coupled circuits principle and the notion of equivalent current density. In order to make the model homogenous, we consider the current density as a state variable since this density is compatible with the representation of the magnetisation by equivalent currents. By introducing the fictitious electric conductivity approach, the sensor impedance is expressed according to magnetic tube or plate characteristics such as electric conductivity and magnetic permeability. An excellent concordance is achieved by comparing the calculated results to those of analytical ones. Regarding the mesh simplicity and the fast calculation, this method is very adapted for the resolution of the inverse problems for real time evaluation of the properties of magnetic materials.},
	url = {https://www.tandfonline.com/doi/abs/10.1080/10589759.2019.1628958?journalCode=gnte20},
	author = {Tarik Bouchala and Aouf Anouaressadate and Bachir Abdelhadi and Benoudjit Azeddine}
}
@article {4720,
	title = {Development of Multi-Coils Circular Eddy Current Sensor for Characterization of Fibers Orientation and Defect Detection in Multidirectional CFRP Material, ISSN / e-ISSN 0934-9847 / 1432-2110},
	journal = {Research in Nondestructive Evaluation},
	year = {2019},
	abstract = {This article presents a study of a Multi-coils circular eddy current non-destructive testing sensor for determining the fibers orientation as well as the detection of defect in multidirectional carbon fibers reinforced polymer (CFRP). The developed sensor contains 16 rectangular coils connected in series and supplied by a single-phase sinusoidal source. This sensor allows the annulations of the mechanical rotation of the conventional sensors and it permits to reduce the inspection procedure duration. The electromagnetic phenomena are calculated by using 3D finite element method (FEM) based on the electromagnetic AV-A formulation. Finally, the Multi-coils circular sensor responses are analyzed through polar diagrams of the impedance variation, where the defect is taken into consideration. A great concordance between the obtained results and those of literatures has been noticed. The provided results show that the proposed sensor allows an efficient characterization of multidirectional CFRP and detection of defects in different layers.},
	url = {https://www.tandfonline.com/doi/abs/10.1080/09349847.2019.1645254?journalCode=urnd20},
	author = {Benhadda Nabil and Hachi Dahmane and Helifa Bachir and Lefkaier Ibn Khaldoun and Bachir Abdelhadi}
}
@mastersthesis {5547,
	title = {Contr{\^o}le non destructif(CND), Etude et mod{\'e}lisation d\&$\#$39;un capteur Inductif {\`a} courants de Foucault},
	year = {2018},
	author = {Abdou Abdelhak}
}
@mastersthesis {5540,
	title = {Commande de la Machine Synchrone {\`a} Aimants Permanents},
	year = {2018},
	author = {Nedjar Haroun and Sahraoui  Khalil}
}
@mastersthesis {5539,
	title = {Etude d\&rsquo;une Machine Synchrone {\`a} Aimants Permanents Aliment{\'e}e par un Onduleur de Tension Multi-Niveaux},
	year = {2018},
	author = {Laiche Hacene and Laiche Takieddine}
}
@mastersthesis {5538,
	title = {Contr{\^o}le Non Destructif par Courants de Foucault (Application aux Structures Rivet{\'e}es Utilis{\'e}es en A{\'e}ronautiques)},
	year = {2018},
	author = {Amirouche SAOUDI and BENHALIMA Abdenour}
}
@mastersthesis {5537,
	title = {Contr{\^o}le Non Destructif par Courants de Foucault (Application aux pi{\`e}ces cylindriques)},
	year = {2018},
	author = {LAYACHI Amel and BAKAI Lakhdar}
}
@mastersthesis {5505,
	title = {Etude et r{\'e}alisation d\&$\#$39;un onduleur monophas{\'e} multi-niveaux},
	year = {2018},
	author = {MEDOUR Nassreddine and MEDOUR Sameh}
}
@mastersthesis {5428,
	title = {Etude et r{\'e}alisation d\&$\#$39;un hacheur s{\'e}rie pour la commande d\&$\#$39;un moteur {\`a} C.C},
	year = {2018},
	author = {DJEBBAR Ahlem}
}
@mastersthesis {5422,
	title = {Etude et R{\'e}alisation d\&$\#$39;un Hacheur s{\'e}rie pour la commande d\&$\#$39;un moteur {\`a} courant continu},
	year = {2018},
	author = {BENMESSAOUD  Ismahane}
}
@mastersthesis {5421,
	title = {Etude, Mod{\'e}lisation et Commande de la Machine Asynchrone {\`a} Double alimentation},
	year = {2018},
	author = {AICHI Fedwa}
}
@mastersthesis {5420,
	title = {Etude des Diff{\'e}rentes techniques pour le r{\'e}glage de la tension dans les r{\'e}seaux {\'e}lectriques},
	year = {2018},
	author = {BENGOUGA   Hanane}
}
@mastersthesis {5417,
	title = {Conception d\&$\#$39;une commande floue de la machine asynchrone double {\'e}toile},
	year = {2018},
	author = {DIB Achraf}
}
@mastersthesis {5416,
	title = {Commande par DTC de la machine double {\'e}toile},
	year = {2018},
	author = {BENALI Lazhar}
}
@mastersthesis {5415,
	title = {Commande non lin{\'e}aire d\&$\#$39;une machine asynchrone},
	year = {2018},
	author = {MEGAACHE Lakhdar}
}
@mastersthesis {5408,
	title = {Etude et Mod{\'e}lisation d\&rsquo;un Capteur Inductif {\`a} Courant de Faucoult},
	year = {2018},
	author = {Etude et Mod{\'e}lisation d{\textquoteright}un Capteur Inductif {\`a} Courant de Faucoult}
}
@mastersthesis {5397,
	title = {R{\'e}alisation d\&$\#$39;une Machine CNC},
	year = {2018},
	author = {OUALAH Oussama}
}
@mastersthesis {5396,
	title = {Etude et R{\'e}alisation d\&$\#$39;un R{\'e}dresseur D{\'e}di{\'e} au Syst{\`e}me Eolien},
	year = {2018},
	author = {BERBECHE Nasreddine}
}
@mastersthesis {5395,
	title = {R{\'e}alisation d\&$\#$39;un Syst{\`e}me Hybride Eolien-Photovoltaique},
	year = {2018},
	author = {BOUABDELLAH  Karim and BELKHIR Ikram}
}
@mastersthesis {5394,
	title = {Etude et R{\'e}alisation d\&$\#$39;un Hacheur Flyback D{\'e}di{\'e} au Syst{\`e}me Hybride Eolien-Photovoltaique},
	year = {2018},
	author = {KOUIDRI Moussa and BACI Abdelkader}
}
@mastersthesis {5393,
	title = {Etude et R{\'e}alisation d\&$\#$39;un Onduleur Monophas{\'e} {\`a} Trois Niveaux},
	year = {2018},
	author = {LAMMARI Ahmed}
}
@mastersthesis {5392,
	title = {Conception du Syst{\`e}me Eolien Int{\'e}gr{\'e} au R{\'e}seau BT},
	year = {2018},
	author = {BENDJABALLAH Al Abbas}
}
@mastersthesis {5375,
	title = {R{\'e}alisation d\&rsquo;un Hacheur avec Pilotage d\&rsquo;un Robot V{\'e}hicule},
	year = {2018},
	author = {LAANANI Fatma and GHEBROUJ Nadia}
}
@mastersthesis {5373,
	title = {R{\'e}alisation d\&rsquo;un Onduleur Triphas{\'e} {\`a} Base des Transistors NPN et PNP avec Protection contre les Surintensit{\'e}s},
	year = {2018},
	author = {CHEBBI Lahcene}
}
@article {4765,
	title = {Direct torque control using second order sliding mode a double star permanenet magnet synchronous machine, ISSN / e-ISSN 2286-3540 / 234X},
	journal = {UPB Scientific Bulletin, Series C, electrical Engineering},
	volume = {volume 80},
	number = { issue 4},
	year = {2018},
	abstract = {This work deals with the performance improvement study of the direct torque control (DTC) of a Double Star Permanent Magnet Synchronous Machine (DSPMSM) based on Second Order Sliding Mode Control (SOSMC), powered by two voltage source inverters. DTC control using conventional PI regulators has certain disadvantages such as significant flux, torque ripples and sensitivity to parametric variations. To overcome these drawbacks, we apply a new type with more robust regulators such as the second order sliding mode control. Simulation results demonstrate the feasibility and validity of the proposed DTC-SOSMC system by effectively accelerating system response, reducing torque and flux ripple and a very satisfactory performance has been achieved.},
	url = {https://pdfs.semanticscholar.org/ad95/7e29b82318da77b927de7c32a4db2c5b0084.pdf?_ga=2.154274619.2069222087.1583915469-1396058073.1583915469},
	author = {Laggoun Louanasse and Youb Lamia and Sebti Belkacem and Benaggoune Said}
}
@article {4764,
	title = {Influence of Conductive Pollution on Eddy Current Sensor Signals, ISSn / e-ISSN 1061-8309 / 1608-3385},
	journal = {Russian Journal of Nondestructive Testing},
	volume = {volume 54},
	number = {N{\textdegree} 3},
	year = {2018},
	pages = {pp. 192-202},
	abstract = {This paper presents a study of a surface crack detection in which the volume is filled by conductive substances due to the polluting environment. Hence, this investigation demonstrates by numerical simulation that electric conductivity is a crucial property that has to be added to the other defect geometrical characteristics in order to complete the developed models. Consequently, introducing the tolerance in percent in the measured impedance is necessary in some conditions. So, the obtained results demonstrate that the signal amplitude passes from 0 to 78\% of the maximal amplitude when the defect conductivity rises from 0 to 0.5 Ms/m. On the other hand, the relative difference of the resistance partincreases according to defect volume. For example, for a defect of 0.3 MS/m, the relative difference of the resistance varies from 52 to 62\% of the maximal amplitude when the defect depth varies from 0.5 to 2.25 mm. These results can be exploited to show the effect of the conductive substances occupying the crack volume. In fact, the controller using EC-NDT technique must take into consideration the presence of conductive polluting elements in the crack volume. So, this condition becomes primordial and necessary according to the degree and nature of pollution.},
	url = {https://link.springer.com/article/10.1134/S1061830918030026},
	author = {Abdou Abdelhak and Bouchala Tarek and Nabil Benhadda and Bachir Abdelhadi and Benoudjit Azeddine}
}
@proceedings {4760,
	title = {Energy Optimization Nanotechnology Structures CNTFET GaAs},
	journal = {7th International Conference on Renewable Energy Research and Applications (ICRERA)},
	year = {2018},
	url = {https://ieeexplore.ieee.org/document/8566989}
}
@article {4749,
	title = {Direct torque control using second order sliding mode a double star permanenet magnet synchronous machine, ISSN / e-ISSN 2286-3540 / 234X },
	journal = {UPB Scientific Bulletin, Series C, electrical Engineering},
	volume = {volume 80},
	number = { issue 4},
	year = {2018},
	abstract = {This work deals with the performance improvement study of the direct torque control (DTC) of a Double Star Permanent Magnet Synchronous Machine (DSPMSM) based on Second Order Sliding Mode Control (SOSMC), powered by two voltage source inverters. DTC control using conventional PI regulators has certain disadvantages such as significant flux, torque ripples and sensitivity to parametric variations. To overcome these drawbacks, we apply a new type with more robust regulators such as the second order sliding mode control. Simulation results demonstrate the feasibility and validity of the proposed DTCSOSMC system by effectively accelerating system response, reducing torque and flux ripple and a very satisfactory performance has been achieved.},
	url = {https://www.researchgate.net/publication/329586831_DIRECT_TORQUE_CONTROL_USING_SECOND_ORDER_SLIDING_MODE_OF_A_DOUBLE_STAR_PERMANENT_MAGNET_SYNCHRONOUS_MACHINE},
	author = {Laggoun Louanasse and Youb Lamia and Sebti Belkacem and Benaggoune Said}
}
@article {4748,
	title = {Fault diagnosis in static converters used in induction heating systems, ISSN  2210-8327},
	journal = {Applied Computing and informatics},
	year = {2018},
	author = {Ghoulemallah Boukhalfa and Sebti Belkacem and Chikhi Abdesselem and Benaggoune Said}
}
@article {4744,
	title = {An Adaptive Fuzzy H Synergetic Approach to Robust Control, ISSN / e-ISSN 0022-0434 / 1528-9028 },
	journal = {Journal of Dynamic Systems, Measurement, and Control },
	volume = {volume 140},
	number = {Issue 1},
	year = {2018},
	pages = {pp. 011008},
	abstract = {Robust control often requires some adaptive approach in evaluating systems dynamics to handle parameters variations and external disturbances. Therefore, an error due to dynamics approximation is inevitably added to uncertainties already present in the model. This issue is addressed in this paper, through the combination of two robust techniques, Hinf and synergetic control. These latter are used to ensure reducing tracking error in the overall closed-loop system while guaranteeing stability via Lyapunov synthesis. With the aim of handling parameters variations, an indirect adaptive fuzzy scheme is used to elaborate system model. Simulation studies are conducted to assess the proposed approach on two practical systems, and the results are compared to a sliding mode proportional integral (PI)-based technique. It is to be noted that a large class of systems depicted as control affine systems will be considered in this paper. An induction motor and an inverted pendulum representing, respectively, a linear and a nonlinear system are utilized in this study showing improvement due to the suggested approach, in overall performance over its sliding mode control counterpart.},
	url = {https://www.researchgate.net/publication/318713077_An_Adaptive_Fuzzy_Hinfinity_Synergetic_Approach_to_Robust_Control},
	author = {Medjbeur Lemya and Harmas  Mohamed Naguib and Benaggoune Said and Zehar Khaled}
}
@article {4742,
	title = {DSP-based implementation of fast terminal synergic control for a DC-DC Buck converter, ISSN / e-ISSN 0016-0032 / 1879-2693},
	journal = {Journal of the Franklin Institute },
	volume = {volume 355},
	number = {Issue 5},
	year = {2018},
	pages = {pp. 2329-2343},
	abstract = {Finite time convergence based on robust synergetic control (SC) theory and terminal attractor techniques is investigated. To this end a fast terminal synergetic control law (FTSC) is applied to drive a DC{\textendash}DC Buck converter via simulation and through a dSpace based experimental setup to validate the approach. As robust as sliding mode control, the synergetic approach used is chattering free and provides rapid convergence. Efficacy of the proposed fast terminal synergetic controller is tested for step load change and output voltage variation and results compared to classical synergetic and PI control. Experimental validation using dSpace DS1104 confirms the results obtained in simulation showing the soundness of this approach compared to synergetic and PI controllers.},
	url = {https://www.sciencedirect.com/science/article/abs/pii/S0016003218300516?via\%3Dihub},
	author = {Zerroug Nadjat and Harmas  Mohamed Naguib and Bouchama Ziyad and Benaggoune Said and Zehar Khaled}
}
@article {4741,
	title = {Design of an Adaptive Fuzzy Control System for Dual Star Induction Motor Drives, ISSN / e-ISSN 1582-7445 / 1844-7600},
	journal = {Advances in Electrical and Computer Engineering},
	volume = {volume 18},
	number = { issue 3},
	year = {2018},
	pages = {pp.37-44},
	abstract = {In this paper, a new control stra{\textlnot}tegy is deve{\textlnot}loped; an adaptive fuzzy controller based on Lyapunov{\textquoteright}s stability theory (AFLC) recalculates the real-time PI-fuzzy gains and combines the advantages of two robust techniques i.e. the fuzzy logic control and the adaptive one. For the new adaptive fuzzy control, we followed two steps: in the first one, a PI-fuzzy controller is designed, in the second step, the gains of a fuzzy regulator are determined. Extensive simulation results are presented to validate the proposed technique. The system is tested at different speeds and a very satisfactory performance has been achieved.},
	url = {https://www.researchgate.net/publication/327213691_Design_of_an_Adaptive_Fuzzy_Control_System_for_Dual_Star_Induction_Motor_Drives},
	author = {Youb Lamia and Sebti Belkacem and Naceri Farid and Mihai CERNAT and Guasch-Pesquer Luis}
}
@proceedings {4738,
	title = {Design of a controller Linear PID for the Wheels Slip Rate of Systems ABS},
	journal = {International conference on Electronics and Electrical Engineering IC3E-2018},
	year = {2018}
}
@proceedings {4737,
	title = {Power Quality Enhancement of Grid Connected Brushless Doubly Frd Induction Generator Using Sliding Mode Control},
	journal = {The Fourth International conference on Mechanics and Energy ICME{\textquoteright}2018},
	year = {2018},
	url = {http://www.icme.aicme.net}
}
@proceedings {4736,
	title = {A Fuzzy adaptive control of doubly fed induction machine (DFIM)},
	journal = {ICMIE 2018},
	year = {2018},
	url = {https://doi.org/10.1051/matecconf/2018},
	author = {Saidi Abderazek}
}
@proceedings {4727,
	title = {Study of the use of eddy currents for defect detection on U50 Rail},
	journal = {8th International Advances in Applied Physics \& Materials Science Congress and Exhibition Sentido Lykia Resort, Oludeniz Turkey, APMAS 24 - 30 April 2018},
	year = {2018},
	url = {www.apmascongress.org},
	author = {Aouf Anouaressadate}
}
@article {4719,
	title = {Influence of Conductive Pollution on Eddy Current Sensor, ISSN / e-ISSN 1061-8309 / 1608-3385},
	journal = {Russian Journal of Nondestructive Testing},
	volume = {volume 54},
	number = {N{\textdegree}3},
	year = {2018},
	pages = {pp. 192{\textendash}202},
	abstract = {This paper presents a study of a surface crack detection in which the volume is filled by conductive substances due to the polluting environment. Hence, this investigation demonstrates by numerical simulation that electric conductivity is a crucial property that has to be added to the other defect geometrical characteristics in order to complete the developed models. Consequently, introducing the tolerance in percent in the measured impedance is necessary in some conditions. So, the obtained results demonstrate that the signal amplitude passes from 0 to 78\% of the maximal amplitude when the defect conductivity rises from 0 to 0.5 Ms/m. On the other hand, the relative difference of the resistance partincreases according to defect volume. For example, for a defect of 0.3 MS/m, the relative difference of the resistance varies from 52 to 62\% of the maximal amplitude when the defect depth varies from 0.5 to 2.25 mm. These results can be exploited to show the effect of the conductive substances occupying the crack volume. In fact, the controller using EC-NDT technique must take into consideration the presence of conductive polluting elements in the crack volume. So, this condition becomes primordial and necessary according to the degree and nature of pollution.},
	url = {https://link.springer.com/article/10.1134/S1061830918030026},
	author = {Abdou Abdelhak and Bouchala Tarek and Benhadda Nabbil and Bachir Abdelhadi and Benoudjit Azeddine}
}
@article {4717,
	title = {Electrical Conductivity Identification of a Carbon Fiber Composite Material Plate using a Rotating Magnetic Field and Multi-Coil Eddy Currnent, ISSN / e-ISSN 1286-0042 /1286-0050},
	journal = {European Physical Journal Applied Physics},
	volume = {volume 83},
	number = {N{\textdegree}2},
	year = {2018},
	abstract = {This paper proposes a contactless method for the identification of the electrical conductivity tensor of a carbon fiber composite materials plate using a rotating magnetic field and multi-coil eddy current sensor. This sensor consists of identical rectangular multi-coil, excited by two-phase sinusoidal current source in order to generate a rotating magnetic field and to avoid the mechanical rotation of the sensor. The fibers orientations, the longitudinal and transverse conductivities in each ply of carbon fiber composite material plate were directly determined with analysis of the impedance variation of each coil as function of its angular position. The inversion process is based on the use of artificial neural networks. The direct calculation associated with artificial neural networks makes use of 3D time-harmonic finite element method based on the\&nbsp;A,\&nbsp;V{\textendash}A\&nbsp;formulation.},
	url = {https://www.epjap.org/articles/epjap/abs/2018/08/ap170411/ap170411.html},
	author = {Lahrech Ahmed Chaouki and Abdelhadi Bachir and Feliachi Mouloud and Zaoui Abdelhalim and Naїdjate Mohammed}
}
@mastersthesis {5545,
	title = {Maintenance des transformateurs de puissance par l\&rsquo;analyse de l\&rsquo;huile- Applications de l\&rsquo;IA},
	year = {2017},
	author = {Boudraa Saliha}
}
@mastersthesis {5533,
	title = {Etude et r{\'e}alisation d\&$\#$39;un hacheur en pont a base d\&$\#$39;arduino associ{\'e} a un moteur a courant continu},
	year = {2017},
	author = {REDJOUH Abderezak and KHALFOUNE Hamza}
}
@mastersthesis {5530,
	title = {Am{\'e}lioration de la dur{\'e}e de vie des machines {\'e}lectriques par la maintenance},
	year = {2017},
	author = {MOUZAOUI.R}
}
@mastersthesis {5504,
	title = {Etude et dimensionnement d\&$\#$39;un syst{\`e}me photovoltaique autonome avec r{\'e}alisation exp{\'e}rimentale d\&$\#$39;un convertisseur mixte DC/DC},
	year = {2017},
	author = {MEDBOUH Mohamed}
}
@mastersthesis {5503,
	title = {Mod{\'e}lisation par le logiciel Comsol d\&$\#$39;une machine {\`a} r{\'e}luctance variable excit{\'e}e par des aimants permanents},
	year = {2017},
	author = {BENFEDILA Saad}
}
@mastersthesis {5502,
	title = {Dimensionnement et Etude Num{\'e}rique par l\&rsquo;utilisation du logiciel IDEAS et le code de calcul EFL2EP-2D de deux structures de MRV Vernier},
	year = {2017},
	author = {ATHMANI Abdelhalim}
}
@mastersthesis {5427,
	title = {Commande d\&$\#$39;une machine a courant continu par un hacheur {\`a} quatre quadrants},
	year = {2017},
	author = {MERZELKAD  Afaf}
}
@mastersthesis {5426,
	title = {Etude comparative entre la commande vectorielle directe et indirecte de la machine asynchrone},
	year = {2017},
	author = {BOULKOUKH Selma}
}
@mastersthesis {5425,
	title = {Commande par mode de glissement d\&$\#$39;une machine synchrone {\`a} aimants permanents},
	year = {2017},
	author = {ZEGHICHI  Samra}
}
@mastersthesis {5419,
	title = {Etude comparative entre ue commande par mode glissant et une commande floue de la machine {\`a} induction},
	year = {2017},
	author = {Tliba Hakim}
}
@mastersthesis {5418,
	title = {Commande Vectorielle de la machine {\`a} double alimentation},
	year = {2017},
	author = {MAJOR Abdrahim}
}
@mastersthesis {5399,
	title = {Etude et R{\'e}alisation d\&rsquo;un Redresseur Command{\'e} par Arduino pour Syst{\`e}me Eolien},
	year = {2017},
	author = {DRIF Yaakoub and NAILI Hichem}
}
@mastersthesis {5389,
	title = {La maintenance des turbines {\`a} gaz (application production de l\&rsquo;{\'e}nergie {\'e}lectrique).},
	year = {2017},
	author = {BESBES Said and LAHOUEL Ahmed}
}
@mastersthesis {5385,
	title = {Etude et R{\'e}alisation d\&rsquo;un Hacheur pour la Commande d\&$\#$39;une Charge Active},
	year = {2017},
	author = {BENKHALIFA Abderrahmane and GUETRONE Mohammed}
}
@mastersthesis {5384,
	title = {R{\'e}alisation d\&rsquo;une Machine CNC {\`a} Base des Moteurs Pas {\`a} Pas},
	year = {2017},
	author = {DEROUICH Kherreddine and SADDEM Amine}
}
@mastersthesis {5383,
	title = {Etude et R{\'e}alisation d\&rsquo;un Convertisseur Continu-Continu pour un Syst{\`e}me Eolien},
	year = {2017},
	author = {CHARA Said and BENSEBAA Houssem}
}
@mastersthesis {5382,
	title = {Etude de l\&$\#$39;Interface Electronique Associ{\'e}e au Syst{\`e}me Eolien Autonome},
	year = {2017},
	author = {SAIED Abdallah}
}
@mastersthesis {5381,
	title = {Etude et R{\'e}alisation d\&rsquo;un Banc d\&$\#$39;Essai P{\'e}dagogique d\&$\#$39;un  Syst{\`e}me Eolien},
	year = {2017},
	author = {SENOUSAOUI Imane}
}
@mastersthesis {5377,
	title = {Etude et R{\'e}alisation d\&rsquo;un Onduleur Triphas{\'e} {\`a} Base d\&rsquo;Arduino \&ndash; Destin{\'e} {\`a} la Traction Electrique},
	year = {2017},
	author = {BOUMECHACHE Youssouf}
}
@mastersthesis {5376,
	title = {Etude et R{\'e}alisation d\&rsquo;un Hacheur Pont R{\'e}versible {\`a} Base d\&rsquo;Arduino},
	year = {2017},
	author = {KHALFOUNE Hamza and REDJOUH Abderrezzak}
}
@article {4756,
	title = {Planification {\'e}conomique de l\&$\#$39;{\'e}change d\&$\#$39;{\'e}nergie {\'e}lectrique entre des r{\'e}seaux interconnect{\'e}s},
	journal = {Revue de l{\textquoteright}{\'e}conomie industrielle},
	volume = {volume 7},
	number = {N{\textdegree}2},
	year = {2017},
	pages = {pp. 8-24},
	abstract = {Le pr{\'e}sent article traite le probl{\`e}me de l{\textquoteright}{\'e}change d{\textquoteright}{\'e}nergie {\'e}lectrique entre des r{\'e}seaux interconnect{\'e}s. L{\textquoteright}objectif principal est de d{\'e}velopper un programme qui permet de d{\'e}terminer les moments les plus {\'e}conomiques pour l{\textquoteright}{\'e}change d{\textquoteright}{\'e}nergie {\'e}lectrique entre les r{\'e}seaux {\'e}lectriques. Pour que ce b{\'e}n{\'e}fice soit encore meilleur, l{\textquoteright}{\'e}change doit {\^e}tre anticip{\'e} par une r{\'e}partition optimale de la charge pour chaque r{\'e}seau {\'e}lectrique. Pour r{\'e}soudre ce probl{\`e}me on a con{\c c}u un mod{\`e}le utilisant conjointement l{\textquoteright}{\'e}coulement de puissances optimales et l{\textquoteright}optimisation des b{\'e}n{\'e}fices lors de l{\textquoteright}{\'e}change de l{\textquoteright}{\'e}nergie {\'e}lectrique. Le mod{\`e}le d{\'e}velopp{\'e} est test{\'e} sur des r{\'e}seaux standards IEEE.},
	url = {https://www.asjp.cerist.dz/en/article/33183},
	author = {Bouhentala Abd El Malik and K.Guergazi and Bensalem Ahmed}
}
@proceedings {4733,
	title = {Identification des formes des fissures par r{\'e}seaux de neurones artificiels dans un syst{\`e}me de CND par courants de Foucault},
	journal = {5{\`e}me Collogue de l{\textquoteright}Inductique, Universit{\'e} des Sciences et de la Technologie d{\textquoteright}Oran {\textendash}Mohamed Boudiaf, 13-14 D{\'e}cembre 2017},
	year = {2017},
	url = {https://www.univ-usto.dz/faculte/fac-electrique/index.php?option=com_users\&view=reset},
	author = {Chattouh Bensalah}
}
@proceedings {4732,
	title = {D{\'e}tection de D{\'e}laminage dans une Plaque en MCFC par Utilisation d\&$\#$39;un Capteur Multi-Bobine {\`a} Champ Magn{\'e}tique Tournant},
	journal = {5{\`e}me Collogue de l{\textquoteright}Inductique, Universit{\'e} des Sciences et de la Technologie d{\textquoteright}Oran {\textendash}Mohamed Boudiaf 13-14 D{\'e}cembre 2017},
	year = {2017},
	url = {https://www.univ-usto.dz/faculte/fac-electrique/index.php?option=com_users\&view=reset},
	author = {Lahrech Ahmed Chaouki}
}
@proceedings {4731,
	title = {Etude de la D{\'e}tection de D{\'e}fauts de Rail U50 par Courants de Foucault Non Destructifs},
	journal = {5{\`e}me Collogue de l{\textquoteright}Inductique, Universit{\'e} des Sciences et de la Technologie d{\textquoteright}Oran {\textendash}Mohamed Boudiaf, 13-14 D{\'e}cembre 2017},
	year = {2017},
	url = {https://www.univ-usto.dz/faculte/fac-electrique/index.php?option=com_users\&view=reset},
	author = {Aouf Anouaressadate}
}
@proceedings {4728,
	title = {Identification du Tenseur de Conductivit{\'e} Electrique d\&$\#$39;une Plaque en MCFC par Utilisation d\&$\#$39;un Capteur Multi-Bobine {\`a} Champ Magn{\'e}tique Tournant},
	journal = {NUMELEC 2017, 9{\`e}me Conf{\'e}rence Europ{\'e}enne sur les M{\'e}thodes Num{\'e}riques en Electromagn{\'e}tisme, 15-17 Novembre 2017, Paris, France},
	year = {2017},
	url = {https://numelec2017.sciencesconf.org},
	author = {Feliachi Mouloud}
}
@mastersthesis {5577,
	title = {D{\'e}veloppement de M{\'e}thodes Rapides pour la R{\'e}solution des Probl{\`e}mes Inverses dans les Syst{\`e}mes de CND par Courants de Foucault},
	year = {2016},
	author = {Bouchala Tarek}
}
@mastersthesis {5554,
	title = {diagnostic des transformateurs par l\&rsquo;analyse des huiles en appliquant la logique floue},
	year = {2016},
	author = {BENMAKHLOUF Majda}
}
@mastersthesis {5553,
	title = {Diagnostic des isolations par la m{\'e}thode des d{\'e}charges partielles en appliquant la logique floue},
	year = {2016},
	author = {Ben Atia Badis}
}
@mastersthesis {5546,
	title = {Etude de la d{\'e}charge {\'e}lectrique dans l\&$\#$39;air par l\&$\#$39;intelligence artificielle},
	year = {2016},
	author = {BOUREK Yacine}
}
@mastersthesis {5544,
	title = {Diagnostic des transformateurs par l\&rsquo;analyse des huiles en appliquant la logique floue},
	year = {2016},
	author = {BENMAKHLOUF Majda}
}
@mastersthesis {5536,
	title = {Mod{\'e}lisation en 3D par {\'E}l{\'e}ments finis \&quot; sous COMSOL Mulityphysics \&quot; d\&$\#$39;un Syst{\`e}me Multi-Capteurs pour la D{\'e}tection de D{\'e}fauts Surfaciques par la M{\'e}thode de Contr{\^o}le Non Destructif par Courants de Foucault},
	year = {2016},
	author = {Mohammed HAMDI}
}
@mastersthesis {5534,
	title = {Reglage de la tension dans les r{\'e}seaux du futur},
	year = {2016},
	author = {GHENANI Rabie}
}
@mastersthesis {5531,
	title = {Diagnostic des isolations par la m{\'e}thode des d{\'e}charges partielles en appliquant la logique floue\&rsquo;, option Contr{\^o}le et diagnostic de syst{\'e}mes {\'e}lectriques},
	year = {2016},
	author = {BENATIA. B}
}
@mastersthesis {5524,
	title = {{\'E}tude et Mod{\'e}lisation d\&rsquo;une Machine a R{\'e}luctance Variable Synchrone avec R{\'e}alisation Exp{\'e}rimentale \&laquo; en vue d\&rsquo;utilisation en traction {\'e}lectrique \&raquo;},
	year = {2016},
	author = {OUNIS Hemama}
}
@mastersthesis {5523,
	title = {Dimensionnement et Etude Num{\'e}rique par l\&rsquo;utilisation du logiciel F.E.M.M. d\&rsquo;un Variateur de Vitesse Electromagn{\'e}tique},
	year = {2016},
	author = {BERAH Imad}
}
@mastersthesis {5501,
	title = {Comparaison entre la m{\'e}thode de Gauss Seidel et la m{\'e}thode de Newton Raphson pour le calcul de l\&$\#$39;{\'e}coulement de puissance},
	year = {2016},
	author = {SAIDI Ali}
}
@mastersthesis {5500,
	title = {Etude et conception d\&$\#$39;un r{\'e}gulateur de tension appliqu{\'e} {\`a} une voiture solaire},
	year = {2016},
	author = {NAHNAH Adel}
}
@mastersthesis {5499,
	title = {Dimensionnement et Etude Num{\'e}rique par l\&rsquo;utilisation du logiciel F.E.M.M. d\&rsquo;un Variateur de Vitesse Electromagn{\'e}tique},
	year = {2016},
	author = {BERRAH Imad}
}
@mastersthesis {5498,
	title = {Etude pour la r{\'e}alisation d\&$\#$39;un commutateur {\'e}lectronique par microcontroleur via un PC},
	year = {2016},
	author = {GATI Miloud}
}
@mastersthesis {5496,
	title = {Dimensionnement et Etude Num{\'e}rique par l\&rsquo;utilisation du logiciel F.E.M.M. d\&rsquo;un Variateur de Vitesse Electromagn{\'e}tique},
	year = {2016},
	author = {BERAH Imad}
}
@mastersthesis {5495,
	title = {{\'E}tude et Mod{\'e}lisation d\&rsquo;une Machine a R{\'e}luctance Variable Synchrone avec R{\'e}alisation Exp{\'e}rimentale \&laquo; en vue d\&rsquo;utilisation en traction {\'e}lectrique \&raquo;},
	year = {2016},
	author = {OUNIS Hemama}
}
@mastersthesis {5492,
	title = {Conception d\&rsquo;un Syst{\`e}me de Traction Hydrau-Electrique par le Logiciel (Automation Studio)},
	year = {2016},
	author = {ZEBBER Lamine and SIA Belkheir}
}
@mastersthesis {5491,
	title = {Le Comportement de la Machine Asynchrone Triphas{\'e}e dans un Syst{\`e}me de Traction Hydrau-Electrique},
	year = {2016},
	author = {CHINOUN Khaled and TAIBAOUI Ameur}
}
@mastersthesis {5490,
	title = {La maintenance d\&rsquo;une Centrale de Production de l\&rsquo;Energie Electrique \&laquo; Turbine {\`a} Gaz \&raquo;},
	year = {2016},
	author = {SIGUESMI Abdelbari and ZEMALI Zakaria}
}
@mastersthesis {5489,
	title = {La Maintenance d\&rsquo;une Chaine de Traction Electrique},
	year = {2016},
	author = {BOUFATEH Mohamed Laid}
}
@mastersthesis {5488,
	title = {La Maintenance d\&rsquo;un Syst{\`e}me de Traction Hydrau-Electrique},
	year = {2016},
	author = {MOSTEFAI Mohamed and NAFTI Ali}
}
@mastersthesis {5487,
	title = {Etude et R{\'e}alisation d\&rsquo;une Maquette d\&rsquo;un Commutateur Electronique Multi-positions},
	year = {2016},
	author = {GATI Miloud}
}
@mastersthesis {5486,
	title = {R{\'e}alisation d\&rsquo;une Maquette d\&rsquo;un Hacheur {\`a} base de PIC},
	year = {2016},
	author = {Mehdi Amina}
}
@mastersthesis {5485,
	title = {R{\'e}alisation d\&rsquo;une Maquette d\&rsquo;un Onduleur {\`a} base de PIC},
	year = {2016},
	author = {BENMAIZA Younes}
}
@mastersthesis {5469,
	title = {Contribution au Contr{\^o}le Adaptatif Flou des Systemes non Lin{\'e}aires},
	year = {2016},
	author = {MEDJEBEUR Lemya}
}
@mastersthesis {5468,
	title = {Contribution {\`a} la commande de la machine Asynchrone. Apport de la Commande Pr{\'e}dictive},
	year = {2016},
	author = {Djeghdali Lakhdar}
}
@mastersthesis {5460,
	title = {Exp{\'e}rimentation et Simulation d\&$\#$39;un Arbre Electrqiue},
	year = {2016},
	author = {BOUKHALFA  Goulemallah}
}
@mastersthesis {5459,
	title = {Etude des Harmoniques et Techniques de Commandes du Filtre Actif},
	year = {2016},
	author = {Moussa Oussama}
}
@mastersthesis {5436,
	title = {Contribution {\`a} la commande de la machine asynchrone. Apport de la commande pr{\'e}dictive},
	year = {2016},
	author = {Djeghdali Lakhdar}
}
@mastersthesis {5434,
	title = {Conception d\&$\#$39;une commande non lin{\'e}aire de r{\'e}saeu},
	year = {2016},
	author = {Aouadj Mounir}
}
@mastersthesis {5433,
	title = {Contribution {\`a} la commande hybride par mode glissant floue appliqu{\'e}e {\`a} un moteur {\`a} induction. Apport des techniques de l\&$\#$39;intelligence artificielle},
	year = {2016},
	author = {Bendaas Ismail}
}
@mastersthesis {5432,
	title = {Commande LQ d\&$\#$39;un moteur synchrone},
	year = {2016},
	author = {BANALI  Walid}
}
@mastersthesis {5431,
	title = {Etude de la commande d\&$\#$39;un syst{\`e}me eolien bas{\'e} sur une GADA},
	year = {2016},
	author = {BENAMAR Asma}
}
@mastersthesis {5430,
	title = {Exp{\'e}rimentation et Simulation d\&$\#$39;un Arbre Electrqiue},
	year = {2016},
	author = {BOUKHALFA  Goulemallah}
}
@mastersthesis {5429,
	title = {Etude des Harmoniques et Techniques de Commandes du Filtre Actif},
	year = {2016},
	author = {Moussa Oussama}
}
@mastersthesis {5398,
	title = {Etude et R{\'e}alisation d\&rsquo;un Hacheur on Pont R{\'e}versible {\`a} Base d\&rsquo;Arduino \&ndash;Destin{\'e} {\`a} la Traction Electrique\&ndash;},
	year = {2016},
	author = {MAHDI Amina}
}
@mastersthesis {5380,
	title = {Etude et Mod{\'e}lisation d\&rsquo;une Machine {\`a} R{\'e}luctance Variable Synchrone avec R{\'e}alisation Exp{\'e}rimentale \&ndash;en vue d\&rsquo;Utilisation en Traction Electrique\&ndash;},
	year = {2016},
	author = {OUNIS Hemama}
}
@mastersthesis {5379,
	title = {Etude et R{\'e}alisation d\&rsquo;une Maquette d\&rsquo;un Commutateur Electronique Pilot{\'e} par un Microcontr{\^o}leur via un PC},
	year = {2016},
	author = {GATI Miloud}
}
@mastersthesis {5378,
	title = {R{\'e}alisation d\&rsquo;une Maquette d\&rsquo;un Onduleur Triphas{\'e} Command{\'e} par Arduino},
	year = {2016},
	author = {BENMAIZA Younes}
}
@article {4822,
	title = {Effect of Applied Electric Field and Pressure on the Electron Avalanche Growth, e-ISSN 2415-1513},
	journal = {WSEAS TRANSACTIONS on ELECTRONICS},
	volume = {7},
	year = {2016},
	abstract = {The purpose of this paper is to mimic, using the Monte Carlo Simulation, the electron avalanche growth by tracking individual paths of charged particles; the effect of space charge is included by solving the Poisson equation. An electronic avalanche is produced, when an electric field, sufficiently intense, is applied to a gas. At some stage of formation of free electrons and ions; the electronic avalanche becomes a conductor channel, and then self sustainment of the discharge. The simulation is carried out in O2 gas for two different pressures, under the effect of uniform electrical fields. The streamer breakdown criterion for the different applied uniform fields is examined. },
	url = {http://www.wseas.us/journal/pdf/electronics/2016/a045817-098.pdf},
	author = {L. Zeghichi and Mokhnache Leila and M. Djebabra}
}
@proceedings {4769,
	title = {The Combination Finite Element / Monte Carlo Collision for Gas Discharge Modeling},
	journal = {ICD{\textquoteright}2016 code 85439, Montpelier},
	year = {2016},
	author = {L. Zeghichi}
}
@proceedings {4768,
	title = {ANFIS Fault Severity Detection and Appropriate Maintenance for Transformer Oil Using Combined DGA Criteria},
	journal = {Euromaintenance Athenes},
	year = {2016},
	author = {S. Boudraa}
}
@proceedings {4761,
	title = {Simulation of a 2D Magnetics Drug Targenting Model},
	journal = {International Conference on Advances in Civil, Structural and Environmental Engineering ACSEE },
	year = {2016},
	url = {https://www.icrera.org/},
	author = {Bouhantala Abdelmalik}
}
@article {4751,
	title = {Reducing of Torque and Flux ripples in DTC of IM based on predictive control, ISSN 1582-4594},
	journal = {Journal of Electrical Engineering},
	volume = {volume 16},
	number = {N{\textdegree}1~},
	year = {2016},
	abstract = {We present in this paper a comparative study between two control strategies of electrical machines: Direct Torque Control (DTC-SVM), and Predictive Direct Torque Control (MPDTC). The first algorithm based on PI controllers, where the torque and the flux are regulated by a PI controller; we present a conception method of the PI controllers, associated with the flux and the torque regulation loops and gives analytical formulas for the proportional and integral gains. We also present in the second algorithm. The Predictive Direct Torque Control based on the linearization input-output of the machine. The technique of the linearization is used to give a model linearized and uncoupled from the machine for the anticipation of future behavior of the output. Following the formulation of both approaches, their implementation in the Matlab-Simulink environment has been treated. It has been found that the second approach MPDTC yields high dynamic performances in the whole speed range. These performances are characterized by a low torque ripple. However, requires much more CPU time than the first one.},
	url = {https://www.researchgate.net/publication/304887561_Reducing_of_torque_and_flux_ripples_in_DTC_of_im_based_on_predictive_control},
	author = {Djaghdali Lakhdar and Sebti Belkacem and Naceri Farid}
}
@article {4747,
	title = {A comparative performance analysis based on artificial intelligence techniques applied to three phase induction motor,ISSN / e-ISSN 1330-1365 / 1849-8671},
	journal = {International journal for engineering Modelling},
	volume = {volume 28},
	number = {N{\textdegree}4},
	year = {2016},
	abstract = {In this work, we introduced a new robust hybrid control to an induction motor (IM), based on the theory of fuzzy logic and variable structure with sliding-mode control (SMC). As the variations of both control system parameters and operating conditions occur, the conventional control methods may not be satisfied further. Fuzzy tuning schemes are employed to improve control performance and to reduce chattering in the sliding mode. The combination of these two theories has given high performance and fast dynamic response with no overshoot. As it is very robust, it is insensitive to process parameters variation and external disturbances.},
	url = {https://pdfs.semanticscholar.org/0306/b4bb7ea1dd054864edbc31c07c70ed3094e0.pdf?_ga=2.126412174.264184932.1583838666-427017692.1583838666},
	author = {Ramdane Amel and Betta Amar and Naceri Farid and Ramdane Seghiri}
}
@proceedings {4735,
	title = {Comparative study between sliding mode controller and fuzzy sliding mode controller in a speed control for doubly fed induction motor},
	journal = {2016 4th International conference on control engineering \& information technologfy (CEIT)},
	year = {2016},
	author = {Saidi Abderazek}
}
@article {4722,
	title = {Exciting Coil Optimization Criteria for Eddy Current Detection of Small Cracks under Fastener Head, ISSN 1582-4594},
	journal = {Journal of Electrical Engineering},
	volume = {volume 16},
	number = {N{\textdegree}4},
	year = {2016},
	pages = {pp. 474-480},
	abstract = {The aim of this paper consists of presenting optimization criteria of coil dimensions and the exciting field frequency in order to improving eddy current probe sensitivity for small and deep cracks under fasteners. To accomplish this task, we have studied the influence of coil inner radius, coil height and exciting frequency on probe sensitivity. Then, an algorithmic searching technique is applied to determine the optimal values of the previous parameters. Hence, the obtained results have revealed that the optimum inner radius corresponds exactly to the fastener head outer radius. Furthermore, it has been noticed that as well as the coil height is reduced while keeping the same number of turns, the probes sensitivity increases. Indeed, the use of stacking flat micro-coils is well adapted. In addition, the calculation of the optimum values of the frequency demonstrate that this parameter depend relatively on the defect position, its radial and vertical depth.},
	url = {https://www.researchgate.net/publication/308972276_Exciting_Coil_Optimization_Criteria_for_Eddy_Current_Detection_of_Small_Cracks_Under_Fastener_Head},
	author = {Bouchala Tarek and Benhadda Nabil and Bachir Abdelhadi}
}
@mastersthesis {5562,
	title = {Mod{\'e}lisation et Etude pour la R{\'e}alisation d\&rsquo;un Capteur {\`a} Courant de Foucault en Mode Diff{\'e}rentiel pour le Control non Destructif (CND)},
	year = {2015},
	author = {Benhadda Nabil}
}
@mastersthesis {5561,
	title = {D{\'e}veloppement d\&rsquo;algorithmes intelligents pour l\&rsquo;identification et la poursuite en temps r{\'e}els des param{\`e}tres {\'e}lectrom{\'e}caniques des machines asynchrones triphas{\'e}es},
	year = {2015},
	author = {Benlarbi Keltoum}
}
@mastersthesis {5560,
	title = {Contr{\^o}le non Destructif (CND) par Courants de Foucault, Mod{\'e}lisation 3D},
	year = {2015},
	author = {ZAOUI Mohammed Ridha}
}
@mastersthesis {5559,
	title = {Contr{\^o}le non Destructif (CND) par Courants de Foucault. Utilisation des Capteurs Magn{\'e}tiques {\`a} Tr{\`e}s Haute Sensibilit{\'e}},
	year = {2015},
	author = {AISSANI Nacereddine}
}
@mastersthesis {5551,
	title = {Effets des champs electromagn{\'e}tiques sur les etres vivants; etudes exp{\'e}rimentale primaire},
	year = {2015},
	author = {Saadi Bachir}
}
@mastersthesis {5528,
	title = {Contribution {\`a} la commande de la machine asynchrone, Analyse de la robustesse vis {\`a} vis des perturbations externes},
	year = {2015},
	author = {Bouhentala Abelmalik}
}
@mastersthesis {5525,
	title = {Etude Analytique et num{\'e}rique d\&$\#$39;un variateur {\'e}lectromagn{\'e}tique de vitesse},
	year = {2015},
	author = {SIDIALI Oussama}
}
@mastersthesis {5484,
	title = {Conception d\&rsquo;un Syst{\`e}me de R{\'e}cup{\'e}ration d\&rsquo;Energie pour la Traction Electrique Ferroviaire},
	year = {2015},
	author = {AMRAOUI Mohamed Nadjib}
}
@mastersthesis {5483,
	title = {La Conception d\&rsquo;un Syst{\`e}me de Traction Electrique Ferroviaire},
	year = {2015},
	author = {TAIBOUZA Salem}
}
@mastersthesis {5482,
	title = {Etude et dimensionnement d\&rsquo;un Syst{\`e}me de Stockage Associ{\'e} au Syst{\`e}me Eolien},
	year = {2015},
	author = {ADOUANE Fatima}
}
@mastersthesis {5481,
	title = {Etude et R{\'e}alisation d\&rsquo;un Hacheur en Pont H Associ{\'e} {\`a} une Machine {\`a} Courant Continu pour Syst{\`e}me de Traction Electrique Ferroviaire},
	year = {2015},
	author = {HAMOUTA Houssem Eddine}
}
@mastersthesis {5480,
	title = {Etude pour la Conception d\&rsquo;une Machine Asynchrone {\`a} Rotor Externe Destin{\'e}e {\`a} la Traction Electrique},
	year = {2015},
	author = {AISSI Souad}
}
@mastersthesis {5467,
	title = {Commande non lin{\'e}aire des capteurs. Application au Champ de Hassi Messaoud},
	year = {2015},
	author = {Aouadj Mounir}
}
@mastersthesis {5455,
	title = {Contribution {\`a} la Commande d\&$\#$39;un Syst{\`e}me Eolien Bas{\'e} sur une GADA},
	year = {2015},
	author = {BENAMAR Asma}
}
@mastersthesis {5453,
	title = {Etude Comparative entre le Foc et le DTC d\&$\#$39;une M.Asynchrone},
	year = {2015},
	author = {Dahmani rabah}
}
@mastersthesis {5452,
	title = {Mod{\'e}lisation et Simulation d\&$\#$39;un Convertisseur AC/DC.},
	year = {2015},
	author = {Sahraoui mohamed}
}
@mastersthesis {5451,
	title = {Minimisation des Pulsations du Couple dans une DTC d\&$\#$39;un MI},
	year = {2015},
	author = {GHETTOUT Fouzi}
}
@mastersthesis {5450,
	title = {Commande non Lin{\'e}aire de la Machine Synchrone},
	year = {2015},
	author = {Lemsara Alaa eddine}
}
@mastersthesis {5449,
	title = {Commande Floue de la Machine Asynchrone Double Etoile: Apport de la Commande Adaptative},
	year = {2015},
	author = {Mekerbeche Manar}
}
@mastersthesis {5448,
	title = {Commande par Mode Glissant de la Machine Asynchrone Double Etoile},
	year = {2015},
	author = {Bouezid Houda}
}
@mastersthesis {5447,
	title = {Commande Hybride: Logique Floue - Mode Glissant d\&$\#$39;un Moteur {\`a} Induction},
	year = {2015},
	author = {Dhimi Asma}
}
@article {4797,
	title = {Robust Induction motor Control using Indirect Adaptive Fuzzy Synergetic Control, ISSN 1582-4594},
	journal = {Journal of Electrical Engineering, Roumanie},
	volume = { Vol 12},
	number = {N{\textdegree}1},
	year = {2015},
	pages = {pp. 140-145},
	abstract = {A new control technique of an induction motor is undertaken through a robust approach tagged synergetic control. Like the sliding mode (SMC) approach the system state trajectories are forced to evolve on a designer chosen manifold according to performance specifications. But unlike SMC, synergetic control relies on a continuous control law thus preventing unwanted chattering to occur. Fuzzy sets are used to approximate unknown system functions and system stability conditions are derived.},
	author = {Medjbeur Lemya and Benaggoune Said}
}
@article {4794,
	title = {High Performance Speed of the Induction Motor Drives by the Predictive Control using Space Vector Modulation, ISSN 2230-9926},
	journal = {IJDR International Journal of Developpment  Research},
	volume = {Vol 5},
	number = {Issue 6},
	year = {2015},
	pages = {pp. 4645-4654},
	abstract = {This paper investigates the application of the generalized predictive control (GPC), in order to control the speed of the induction motor. This application is based on four main ideas :\&nbsp; reproducing decision basic mechanisms of human behaviour; the creation\&nbsp; of\&nbsp; an\&nbsp; anticipatory\&nbsp; effect\&nbsp; by\&nbsp; operation\&nbsp; of\&nbsp; the\&nbsp; path\&nbsp; to\&nbsp; follow\&nbsp; in\&nbsp; the\&nbsp; future;\&nbsp; defining\&nbsp; a\&nbsp; numerical\&nbsp; prediction\&nbsp; model; minimization of a quadratic criterion with finite horizon and the principle of receding horizon. The results proved that the induction motor with the MPC speed controller has superior transient response, and good robustness in face of uncertainties including load disturbance. Moreover, accurate tracking performance has been achieved.},
	url = {https://www.journalijdr.com/sites/default/files/issue-pdf/3168.pdf},
	author = {Djeghdali Lakhdar and Naceri Farid and Sebti Belkacem}
}
@article {4793,
	title = {SCADA System for the Modelling and Optomization of Oil Collecting Pipeline Network, ISSN 2040-7459},
	journal = {RJASET: Research journal Applied Sciences, Engineering\& Technology},
	volume = {10},
	number = {7 },
	year = {2015},
	pages = {pp. 789-804},
	abstract = {This study aims are data acquisition, control and online modeling of an oil collection pipeline network using a SCADA {\guillemotleft}Supervisory Control and Data Acquisition{\guillemotright} system, allowing the optimization of this network in real time by creating more exact models of onsite facilities. Indeed, fast development of computing systems makes obsolete usage of old systems for which maintenance became more and more expensive and their performances don{\textquoteright}t comply any more with modern company operations. SCADA system is a telemetry and control system adapted for particular requirements of an oilfield management. Thanks to its different functions, we take advantage of this system to solve production problems especially those related to oil collecting pipeline network. In fact this network is confronted to some problems, in particular pressure losses which has significant effect on the production. This problem can be taken under control by the awareness of pipeline network operation and all its process data (especially junctions) in real time. This will allow online creation of representative and accurate computerized models for the oil collecting pipeline network including producing wells, collecting pipelines, manifolds and others facilities.},
	url = {https://www.researchgate.net/publication/285429170_SCADA_System_for_the_Modeling_and_Optimization_of_Oil_Collecting_Pipeline_Network_A_Case_Study_of_Hassi_Messaoud_Oilfield},
	author = {Aouadj Mounir and Aouadj Mounir}
}
@article {4792,
	title = {A Novel DTC-SVM Associated with the Calculation of PI Regulator of the Induction machine, ISSN 2005-4238},
	journal = {AJST Asian Journal of Science and Technology},
	volume = {Volume 6},
	number = {Issue 4},
	year = {2015},
	pages = {pp. 1241-1247},
	abstract = {We present, in this paper, a DTC-SVM control algorithm of an induction machine based on PI controllers. Both the torque and the flux are regulated by a PI controller, where the truth table and the hysteresis are eliminated. We present here a conception method of the PI controllers, associated with the flux and the torque regulation loops and gives analytical formulas for the proportional and integral parameters, depending on the parameters of the induction machine. The effectiveness of the proposed approach is shown by simulation results.},
	url = {https://www.journalajst.com/sites/default/files/issues-pdf/2065.pdf},
	author = {Djeghdali Lakhdar and Naceri Farid and Sebti Belkacem}
}
@article {4787,
	title = {The Stable Algorithm Based on a Model Reference Adaptive Control for the Dual Star Machine Drive, ISSN 1582-4594},
	journal = {Journal of Electrical Engineering, Rouma},
	volume = {Volume 15},
	number = {N{\textdegree}4},
	year = {2015},
	abstract = {This paper deals with the design and a simulations study of a Model Reference Adaptive Control speed adaptive controller used for control Dual Star Induction Machine, The developed controller is designed in accordance with Lyapunov stability theory. The technique proposed gives fast dynamic response with no overshoot, the simulation results show that the control.},
	url = {https://www.researchgate.net/publication/301557217_The_stable_algorithm_based_on_a_Model_Reference_Adaptive_Control_for_the_Dual_Star_Induction_Machine_drives},
	author = {Laamayad tahar and Naceri Farid}
}
@article {4785,
	title = {Reducing of Torque and Flux Ripples DTC of IM Based on Predictive Control, ISSN 1582-4594},
	journal = {Journal of Electrical Engineering, Roumanie},
	volume = {Volume 16},
	number = {N{\textdegree}1},
	year = {2015},
	abstract = {We present in this paper a comparative study between two control strategies of electrical machines: Direct Torque Control (DTC-SVM), and Predictive Direct Torque Control (MPDTC). The first algorithm based on PI controllers, where the torque and the flux are regulated by a PI controller; we present a conception method of the PI controllers, associated with the flux and the torque regulation loops and gives analytical formulas for the proportional and integral gains. We also present in the second algorithm. The Predictive Direct Torque Control based on the linearization input-output of the machine. The technique of the linearization is used to give a model linearized and uncoupled from the machine for the anticipation of future behavior of the output. Following the formulation of both approaches, their implementation in the Matlab-Simulink environment has been treated. It has been found that the second approach MPDTC yields high dynamic performances in the whole speed range. These performances are characterized by a low torque ripple. However, requires much more CPU time than the first one.},
	url = {https://www.researchgate.net/publication/304887561_Reducing_of_torque_and_flux_ripples_in_DTC_of_im_based_on_predictive_control},
	author = {Djeghdali Lakhdar and Naceri Farid and Sebti Belkacem}
}
@proceedings {4775,
	title = {Computer Aided Design and Multiple Coupled Circuit Modelling of BDFM},
	journal = {3rd International Conference on  Control, Engineering \& Information Technology CEIT},
	year = {2015},
	pages = {pp. 1 - 6},
	abstract = {A general and efficient algorithmic implementation is presented for calculating of self and/or mutual inductances using winding function theory for any type of stator and/or rotor layout slot windings. Then, this algorithm is applied on brushless doubly fed induction machines with standard cage. In fact, several kinds of slot windings are treated to prove the efficiency of this technique. The procedure is provided with inputs vector consisted by the machine main dimensions, air gap length, stator and rotor slot numbers, pole pairs, slots per pole and phase and the winding slots sequence defining the winding kind. Consequently, the application of this procedure yields both self and mutual inductances matrix of the stator and the rotor as well as the stator-rotor mutual inductances curve and its derivative. Finally, a dynamic simulation with multiple coupled circuits modelling is carried out and the results are presented and discussed.},
	url = {http://ieeexplore.ieee.org/document/7233050/},
	author = {Chaouche Saad}
}
@article {4771,
	title = {New Contactless Eddy Current Non-destructive Methodology of Electric Conductivity Measurement, ISSn / e-ISSN 1058-9759 / 1477-2671},
	journal = {Nondestructive Testing and Evaluation },
	volume = {Volume 30},
	number = { Issue 1},
	year = {2015},
	pages = {pp. 63-73 },
	abstract = {In this paper, a new method of contactless electric conductivity measurement is developed. This method is essentially based on the association of the coupled electric field forward model, which we have recently developed, with a simple and efficient research algorithm. The proposed method is very fast because 1.3\&nbsp;s are sufficient to calculate electric conductivity, in a CPU of 2\&nbsp;GHz and RAM of 3\&nbsp;GB, for a starting research interval of 1.72{\textendash}17.2 \%IACS and tolerance of 1.72\&nbsp;{\texttimes}\&nbsp;10-\&nbsp;5 \%IACS. The study of the calculation time according to mesh density and starting interval width has showed that an optimal choice has to be made in order to improve the rapidity while preserving its precision. Considering its rapidity and its simplicity of implementation, this method is more adapted, in comparison to direct current techniques using Van der Pauw geometry, for automated applications.},
	url = {https://www.tandfonline.com/doi/abs/10.1080/10589759.2014.992431?journalCode=gnte20},
	author = {Bouchala Tarek and Bachir Abdelhadi and Benoudjit Azeddine}
}
@article {4770,
	title = {Application of Coupled Electric Field Method for Eddy Current non-Destructive Inspection of Multilayer Structures, ISSN / e-ISSN 1058-9759 / 1477-2671},
	journal = {Nondestructive Testing and Evaluation },
	volume = {Volume 30},
	number = { Issue 2},
	year = {2015},
	pages = {pp. 124-137},
	abstract = {The development of fast and accurate method describing the electromagnetic phenomena intervening in eddy current non-destructive systems is very interesting, since it permits the design of reliable systems permitting the detection and the characterisation of defect in conductive materials. The coupled electric field method presented in this article can assume a large part of these objectives, because it is fast in comparison to the finite element method and easily invertible since the sensor impedance variation is an explicit function of target physical and geometrical characteristics. These advantages have motivated us to extend this method for multilayered structures, very interesting in aeronautic industry, by superposing the inductive effects in different layers. The impedance of an absolute sensor operating above three conducting layers will be calculated and compared to those obtained with finite element method. Afterwards, we shall exploit the model to study the effect of defect characteristics on the sensor impedance. Furthermore, regarding to the depth penetration effect, we shall make into evidence the necessity of accomplishing an optimal choice of the exciting field frequency during the inspection of multilayered materials. The essential importance of this method, besides of its rapidity, resides in its possibility to be extended to 2D irregular and 3D asymmetric configurations.},
	url = {https://www.tandfonline.com/doi/abs/10.1080/10589759.2015.1018253},
	author = {Bouchala Tarek and Bachir Abdelhadi and Benoudjit Azeddine}
}
@mastersthesis {5558,
	title = {Etude et Mod{\'e}lisation De Capteur A Courants de Foucault pour le Contr{\^o}le non Destructif},
	year = {2014},
	author = {SAFER Omar Adib}
}
@mastersthesis {5556,
	title = {Etude L\&rsquo;ensemble du Moteur Asynchrone-Onduleur de Tension Utilis{\'e} en Traction Electrique},
	year = {2014},
	author = {BEHISSA Mohammed Said}
}
@mastersthesis {5555,
	title = {Contr{\^o}le direct du couple d\&rsquo;un moteur {\`a} induction},
	year = {2014},
	author = {Guenniche Mahieddine}
}
@mastersthesis {5522,
	title = {Etude Analytique et Num{\'e}rique et Comparaison des Performances de diff{\'e}rentes Topologies de MRV VernierApplication en Variateur de vitesse Electromagn{\'e}tique et en traction Electrique},
	year = {2014},
	author = {KADA Youcef}
}
@mastersthesis {5521,
	title = {Etude analytique et num{\'e}rique d\&rsquo;un variateur de vitesse {\'e}lectromagn{\'e}tique},
	year = {2014},
	author = {OUELD TAYIB}
}
@mastersthesis {5517,
	title = {Etude et r{\'e}alisation des filtres du 2{\`e}me, application aux cellules du 2{\`e}me ordre a {\'e}tage amplificateur},
	year = {2014},
	author = {Guettala Nadia}
}
@mastersthesis {5516,
	title = {Etude des circuits PLL, application a la simulation des filtres},
	year = {2014},
	author = {Bedda Dia El Hak}
}
@mastersthesis {5494,
	title = {Contribution {\`a} l\&rsquo;Am{\'e}lioration des Performances Energ{\'e}tique de l\&rsquo;Association Machine Asynchrone-Convertisseur par les Techniques de l\&rsquo;Intelligence Artificielle},
	year = {2014},
	author = {ROUABEH Zineb}
}
@mastersthesis {5493,
	title = {D{\'e}veloppement de M{\'e}thodes Rapides pour la R{\'e}solution des Probl{\`e}mes Inverses dans les Syst{\`e}mes de CND par Courants de Foucault},
	year = {2014},
	author = {Bouchala Tarek}
}
@mastersthesis {5479,
	title = {Etude et dimensionnement d\&rsquo;un Syst{\`e}me de Stockage Associ{\'e} au Syst{\`e}me Eolien},
	year = {2014},
	author = {BOUCETTA Hamza}
}
@mastersthesis {5478,
	title = {Etude et Dimensionnement d\&rsquo;un Syst{\`e}me Hybride Photovolta{\"\i}que-Eolien Autonome avec Syst{\`e}me de Stockage Batteries d\&rsquo;Accumulateurs},
	year = {2014},
	author = {ABDENBI Hichem}
}
@mastersthesis {5477,
	title = {Etude d\&rsquo;une Motorisation {\`a} Courant Alternatif pour Syst{\`e}me de Traction Electrique Ferroviaire},
	year = {2014},
	author = {MELAS Abdelhadi}
}
@mastersthesis {5476,
	title = {Etude d\&rsquo;une Motorisation {\`a} Courant Continu pour Syst{\`e}me de Traction Electrique Ferroviaire Intelligent},
	year = {2014},
	author = {GHOUAIZI Houda}
}
@mastersthesis {5466,
	title = {Contribution {\`a} la commande d\&$\#$39;une machine asynchrone double {\'e}toile par mode glissant. Apport de la logique floue.},
	year = {2014},
	author = {Laamayad tahar}
}
@mastersthesis {5465,
	title = {Implantation des Lois de Commande d\&$\#$39;une MRV en vue d\&$\#$39;une Application Alterno-D{\'e}marreur Pilot{\'e}e par un sqysteme Dspace en Temps R{\'e}el},
	year = {2014},
	author = {Boudouda malik}
}
@mastersthesis {5454,
	title = {Commande d\&$\#$39;un Onduleur Neuf Niveaux destin{\'e} aux Fortes puissances PV},
	year = {2014},
	author = {ABOUB Hania}
}
@mastersthesis {5446,
	title = {Commande par DTC de la Machine Asynchrone},
	year = {2014},
	author = {Saifi Adel}
}
@mastersthesis {5445,
	title = {Commande Robuste d\&$\#$39;un Convertisseur Buck},
	year = {2014},
	author = {Meddour Amine}
}
@mastersthesis {5444,
	title = {Commande de la Machine Asynchrone Monophas{\'e}e par logique Floue},
	year = {2014},
	author = {Boukhentef Houssem Eddine}
}
@mastersthesis {5443,
	title = {Commande Vectorielle de la Machine Asynchrone Double Etoile},
	year = {2014},
	author = {Maaziz Souheil}
}
@proceedings {4826,
	title = {A comparative study of impact of electrical stress and thermal aging on transformer oil},
	journal = {11th International Multi-Conference on Systems, Signals \& Devices SSD;  Espagne 2014},
	year = {2014},
	url = {http://ieeexplore.ieee.org/document/6808905/},
	author = {Boudraa Saliha}
}
@article {4823,
	title = {Study of the Influence of Conductive Defect Characteristics on Eddy Current Differential Probe Signal, ISSN 1582-4594},
	journal = {Journal of Electrical Engineering},
	volume = {Volume 14},
	year = {2014},
	pages = { pp 350-357},
	abstract = {Nowadays, numerical modelling has become an interesting tool for determining impedance variations due to various conductive flaws in eddy current nondestructive evaluation systems. These kinds of defects, rarely treated in the published works, are taken into consideration in the modelling while introducing them as electrically conductive volumes with a finite electric resistivity. This step is very important since it permits to improve qualitatively several models developed so far by many authors whose consider the defect as loss of material only. However, in several applications, the defect can occur with a finite resistivity such as impurity, small burns and micro-solder. On the other hand, even though the defect appears with a loss of materials, som e polluting materials can fill the affected region. Indeed, the volume of the initial defect will be completely or partially occupied by these conducting pollutant materials. This paper deals with the effect of physical and geometrical characteristics of such kind of defects on the differential sensor response. Furthermore, the necessity of taking the defect electric conductivity (as an important parameter) into account will be explained, in order to develop a reliable and accurate inverse method allowing a full characterization of conductive defects.},
	url = {https://www.researchgate.net/publication/266854034_STUDY_OF_THE_INFLUENCE_OF_CONDUCTIVE_DEFECT_CHARACTERISTICS_ON_EDDY_CURRENT_DIFFERENTIAL_PROBE_SIGNAL},
	author = {Benhadda Nabil and Bouchala Tarek and Guettafi Amor and Bachir Abdelhadi}
}
@article {4821,
	title = {
	Artificial neural networks for predicting the gassing tendency under electrical discharge in insulating oil for extended time, ISSN 1582-4594

},
	journal = {Journal of Electrical Engineering},
	volume = {14},
	number = {2},
	year = {2014},
	pages = {pp 45-52},
	abstract = {This study will focus on the investigation of the effect of electrical discharge on physical, chemical, electrical properties of transformer oil, and on the development of a mathematical model describing the gassing of insulating oil under electrical discharge, using the information contained in the measured values. For predicting the gassing tendency for extensive ageing periods, we use the model developed, for an intelligent system design. The predictor{\textquoteright}s parameters are chosen based on their influence degree by the electrical field. Various scenarios were considered. The study was carried on two types of fluids, under electrical stress for different ages. The 6802, 6181 and 924 ASTM tests methods were used for the measurements of parameters in degradation. All the results obtained are summarized and compared. The properties which are strongly dependent have been specified, a multiple linear regression model for each fluid as a function of its DDP, DDF, turbidity and aging period is developed. This model is for the estimation of the gas quantity cumulated under electrical discharge. The prediction is made, by implanting the stepwise regression results into a neural network system, which has been tested on experimental results obtained from laboratory samples, and high prediction accuracy has been achieved.},
	url = {https://www.researchgate.net/publication/297361317_Artificial_neural_networks_for_predicting_the_gassing_tendency_under_electrical_discharge_in_insulating_oil_for_extended_time},
	author = {Boudraa Saliha and Mokhnache Leila}
}
@article {4812,
	title = {New approach for estimate parameters of machine asynchronous, ISSN / e-ISSN 2320\&ndash;3331 / 2278-1676},
	journal = {IOSR Journal of Electrical and Electronics Engineering},
	volume = {9},
	number = {3},
	year = {2014},
	pages = {pp. 28-32},
	abstract = {Rotating electrical machines play an important role in the industrial world. Among them, the three- phase squirrel cage asynchronous machines are frequently used because of their robustness, their relatively simple construction and their low cost. Nevertheless, during their lifespan, these machines are submitted to external and internal stresses which can lead to several failures. In this paper, we present the estimate of the parameters sensitive to the defects, namely the rotor currents and resistances of the rotor bars, by using the Extended Kalman filter.},
	url = {http://www.iosrjournals.org/iosr-jeee/Papers/Vol9-issue3/Version-4/E09342832.pdf},
	author = {Bouhantala Abdelmalik and Benbouza Mohamed Salah}
}
@article {4810,
	title = {Influence de la Longueur de Grille sur les Imp{\'e}dances d\&rsquo;entr{\'e}e et de sortie du Transistor Mesfet GaAs, ISSN 1112-9697},
	journal = {Revue des Sciences et de la Technologie},
	volume = {5},
	number = {1},
	year = {2014},
	abstract = {In information science such as computer, telecommunications, processing of the transmission of signals or images, the components field effect plays a role. Also we are interested in our study to field-effect transistor gate Schottky micron and submicron in gallium arsenide GaAs MESFET said. In this paper, we present the results of calculating the influence of gate length on input impedance and output transistor field effect Schottky barrier gallium arsenide GaAs MESFET said, this physical model is based on the analysis of two-dimensional Poisson equation in the active region under the gate. The theoretical simulation results based on analytical expressions that we have established above, are discussed and compared with those of the experiment },
	url = {http://193.194.69.34/rst2/images/vol5n1/5-018-benbouza.pdf},
	author = {Benbouza Med Salah and F. Z .Maalla and I. Sellaoui}
}
@proceedings {4807,
	title = {Direct Torque Control Sensor of PMSM with EKF Estimation of Speed and Load Torque Observer},
	journal = {16th International power Electronics and motin Control conference and Exposition PEMC},
	year = {2014},
	url = {http://www.pemc2014.org},
	author = {Benaggoune Said}
}
@proceedings {4800,
	title = {Design of Hybrid Controller by Fuzzy Sliding Mode for an Inuction Motor},
	journal = {International Conference on Control Engineering \& Information technology  CEIT },
	year = {2014},
	author = {Belkacem Sebti}
}
@proceedings {4799,
	title = {Contribution the predictive Control on The Minimization of the Cgattering the Torque and the Stator Flux of the Induction Machine},
	journal = {The Second International Conference on Electriacl Engineering and Control applications},
	year = {2014},
	url = {www.eaychair.org/conferences/conf-iceeca2014},
	author = {Djeghdali Lakhdar}
}
@article {4795,
	title = {Simulation and Determination of the Laws Control of the SRM for the integrated Starter Generator Aplication, ISSN 2278-4209},
	journal = {International journal of Electronics Communication and Computer Engineering},
	volume = {Vol 5},
	number = {Issue 3},
	year = {2014},
	pages = {pp. 644-649},
	abstract = {This paper deals with the design of an integrated starter generator system for a car flywheel based on the Switched Reluctance Machine (SRM) technology. First, we discuss about the starter generator problematic following the results of our bibliography research, and secondly, we briefly remained generalities about the SRM and the determination of the laws control. In addition, we designed the converter associated to the machine using (Matlab/Simulink) software in order to identify the laws control and to adapt to the operating modes (motor, generator, booster, brake). Finally, simulations of the open and closed loop model were performed on the converter with machine (SRM).},
	author = {Boudouda malik and Naceri Farid}
}
@article {4791,
	title = {A New Hybrid Controller by Fuzzy Sliding Mode for an Induction Motor, ISSN 1451-4869},
	journal = {IJIER International Journal of Engineering Innovation and Research},
	year = {2014},
	author = {Bendaas Ismail and Naceri Farid}
}
@article {4786,
	title = {Design of Hybrid Controller by Fuzzy Sliding Mode for an Induction Motor, ISSN  2328-2223},
	journal = {Revue des Sciences et de la Technologie - RST},
	volume = {Volume 5},
	number = {Issue 1},
	year = {2014},
	abstract = {This paper presents a synthesis of two control strategies, sliding mode (SMC) and hybrid fuzzy sliding mode control (FSMC) for application to an induction motor (IM) for more precisely, present a performance of fuzzy sliding mode control. To solve those problems associated with conventional control by sliding mode,such as high current, flux and torque chattering, variable switching fr e q u e n c y . Meanwhile, the design of a hybrid controller based on fuzzy sliding mode control (FSMC) is proposed, in which a fuzzy logic controller replaces the discontinuous part of the classical sliding mode control law. Simulations results of the proposed control theme present good dynamic and steady-state performances as compared to the classical SMC from aspects of the reduction of the torque chattering, the quickly dynamic torque response and robustness to disturbance.},
	url = {http://193.194.69.34/rst2/images/vol5n1/2-002-bendaas.pdf},
	author = {Bendaas Ismail and Naceri Farid}
}
@article {4784,
	title = {Improving Asynchrounous Motor Speed and Flux Loop Control bu using Hybrid Fuzzy-SMC Controllers, ISSN 1476-8186},
	journal = {International Journal of Automation and Computing},
	volume = {Volume 11},
	number = {Issue 4},
	year = {2014},
	pages = {pp.  361-367},
	abstract = {This paper presents a new method combining sliding mode control (SMC) and fuzzy logic control (FLC) to enhance the robustness and performance for a class of non-linear control systems. This fuzzy sliding mode control (FSMC) is developed for application in the area for controlling the speed and flux loops of asynchronous motors. The proposed control law can solve those problems associated with the conventional control by sliding mode control, such as high current, flux and torque chattering, variable switching frequency and variation of parameters, in which a robust fuzzy logic controller replaces the discontinuous part of the classical sliding mode control law. Simulation results of the proposed FSMC technique on the speed and flux rotor controllers present good dynamic and steady-state performances compared to the classical SMC in terms of reduction of the torque chattering, quick dynamic torque response and robustness to disturbance and variation of parameters.},
	url = {https://link.springer.com/article/10.1007/s11633-014-0801-x},
	author = {Bendaas Ismail and Naceri Farid and Sebti Belkacem}
}
@proceedings {4780,
	title = {Dimensionnement d\&rsquo;un Syst{\`e}me de Pompage Eolien dans un Site Isol{\'e}},
	journal = {Conf{\'e}rence Nationale~: Energie, Hydrocarbure et Environnement, 3-4 D{\'e}cembre 2014, Adrar, Alg{\'e}rie},
	year = {2014},
	author = {C. Ammari}
}
@article {4772,
	title = {Novel Coupled Electric Field Method for Defect Characterization in Eddy Current Non-Destructive Testing Systems, ISSN / e-ISSN 0195-9298 / 1573-4862},
	journal = {Journal of Nondestructive Evaluation},
	volume = {Volume 33},
	number = {Issue 1},
	year = {2014},
	pages = {pp. 1-11},
	abstract = {This article presents a defect modeling in eddy current non-destructive testing systems by using a new developed method called coupled electric field. It permits to improve qualitatively several models developed so far by many authors using coupled circuit methods that consider the defect only as loss of material. However, a defect can occur with a finite conductivity such as impurity, small burns and micro-solder. For this reason, this investigation consists of extending the coupled circuit method to the modeling of this kind of defects. The proposed approach consists of firstly considering the defect as an electric conductive volume and secondly changing the state variable presenting the electric current by the electric field one. This procedure permits expressing explicitly the impedance variation caused by the presence of an axi-symmetrical defect according to its characteristics. The comparison between the impedance variations calculated using finite elements method and the proposed one demonstrates a very good concordance. After this validation, the study covers also the influence of the defect shape and position on encircling probe impedance. This method is interesting since it permits a fully characterization of this kind of defects and facilitates the inversion process. Moreover, using a 3D finite element observation, this fast tool of simulation can be adapted for a fast phenomenological modeling of asymmetrical configurations.},
	url = {https://www.researchgate.net/publication/259007554_Novel_Coupled_Electric_Field_Method_for_Defect_Characterization_in_Eddy_Current_Non-destructive_Testing_Systems},
	author = {Bouchala Tarek and Bachir Abdelhadi and Benoudjit Azeddine}
}
@mastersthesis {5557,
	title = {Commande d\&rsquo;un Syst{\`e}me Automatis{\'e} de Production (SAP) par Automate Programmable Industriel (API) \&laquo; Briqueterie d\&rsquo;El Kalaa Beni Hammad M\&rsquo;sila \&raquo;},
	year = {2013},
	author = {GUERRAS Lahcen}
}
@mastersthesis {5550,
	title = {Techniques de monitoring pour la Caract{\'e}risation du vieillissement des transformateurs de puissance {\`a} GRTE},
	year = {2013},
	author = {Mechta Malik}
}
@mastersthesis {5520,
	title = {Dimensionnement et Mod{\'e}lisation Analytique et Num{\'e}rique d\&rsquo;une MRV Excit{\'e}e {\`a} Rotor Lisse Externe : Application en Traction Electrique},
	year = {2013},
	author = {BARKA. S}
}
@mastersthesis {5515,
	title = {Etude et simulation des circuits PLL},
	year = {2013},
	author = {Ferhat Oualid}
}
@mastersthesis {5514,
	title = {Etude et programmation de quelques applications par microcontr{\^o}leur},
	year = {2013},
	author = {Merchi Yassine}
}
@mastersthesis {5475,
	title = {Dimensionnement d\&rsquo;un syst{\`e}me hybride photovolta{\"\i}que-{\'e}olien autonome},
	year = {2013},
	author = {Alleg Yacine}
}
@mastersthesis {5474,
	title = {Conception d\&rsquo;un syst{\`e}me {\'e}olien d{\'e}centralis{\'e}},
	year = {2013},
	author = {Aboub Abdessettar}
}
@mastersthesis {5473,
	title = {Conception et dimensionnement d\&rsquo;un syst{\`e}me de pompage {\'e}olien {\'e}lectrique},
	year = {2013},
	author = {Ammari Chouaib}
}
@mastersthesis {5472,
	title = {Etude et R{\'e}alisation d\&$\#$39;un Convertisseur Continu-Alternatif pour Syst{\`e}me de Traction Electrique Ferroviaire},
	year = {2013},
	author = {ATIR  Ahmed and FADEL  Hakim}
}
@mastersthesis {5458,
	title = {Synthese des Controleurs par Backstepping de la Machine Asynchrone},
	year = {2013},
	author = {YOUSFI Moussa}
}
@mastersthesis {5457,
	title = {Commande par DTC d\&$\#$39;un Moteur Asynchrone. Apport des r{\'e}seaux de neurones},
	year = {2013},
	author = {BOUHAFNA  Sebti}
}
@mastersthesis {5442,
	title = {Mod{\'e}lisation et commande d\&$\#$39;une g{\'e}n{\'e}ratrice asynchrone  {\`a} double alimentation - application au syst{\`e}me {\'e}olien},
	year = {2013},
	author = {Ammar  Abdelkrim}
}
@mastersthesis {5441,
	title = {Commande par logique floue d\&$\#$39;une machine asynchrone double alimentation},
	year = {2013},
	author = {Henka Hamza}
}
@mastersthesis {5440,
	title = {Commande Adaptative de la Machine Synchrone},
	year = {2013},
	author = {Melakhsou  Khoudir}
}
@mastersthesis {5439,
	title = {Commande Floue de la Machine Asynchrone},
	year = {2013},
	author = {MERAS  Taqieddine}
}
@mastersthesis {5438,
	title = {Commande Vectorielle de la MADA. Apport de la logique Floue},
	year = {2013},
	author = {Benmessaouda  Noureddine}
}
@mastersthesis {5437,
	title = {Commande Vectorielle de la GADA},
	year = {2013},
	author = {Bezzala Houssem}
}
@proceedings {4829,
	title = {Utilisation de la M{\'e}thode de Monte Carlo l\&rsquo;Etude d\&rsquo;Une D{\'e}charge Electrique dans l\&rsquo;Oxyg{\`e}ne},
	journal = {The INTERNATIONAL CONFERENCE ON ELECTRONICS \& OIL  OURGLA},
	year = {2013},
	author = {L. Zeghichi and Mokhnache Leila and M. Djebabra}
}
@proceedings {4828,
	title = {Experimental Technique for Ameliorate  The Properties of Transformer Oil BORAK 22 In Service},
	journal = {Fourth International Meeting On Dielectric Materials IMDM4 Marrakech, Morocco},
	year = {2013},
	url = {http://docplayer.fr/2704104-Fourth-international-meeting-on-dielectric-materials-marrakech-morocco-29-31-may-2013.html},
	author = {Boudraa Saliha and Mokhnache Leila and B. Saidat and I. Fofana and Y. Hadjaj}
}
@proceedings {4825,
	title = {The Monte Carlo Method for the Study of an Electrical Discharge},
	journal = {ICSD2013, IEEE, Bologna-Italy},
	year = {2013},
	url = {http://ieeexplore.ieee.org/document/6619673/},
	author = {L. Zeghichi}
}
@article {4820,
	title = {A Multi Regression Approach For Predicting The Age Of Transformer Oil In Thermal/Electrical Degradation, e-ISSN 2278-0181},
	journal = {International Journal of Engineering Research \& Technology},
	volume = {Vol 2},
	number = {Issue 5 },
	year = {2013},
	pages = {pp. 1004-1008},
	abstract = {Power transformers are considered capital investments in the infrastructure of every power system in the world. They are the heart of electric power distribution and transmission systems, and it is essential that they function properly. It is knowing that insulating fluid is highly used in a composite or impregnated dielectric system with reference to both dielectric strength and ease of contamination, many investigators have devoted great efforts to investigate fluidsbehaviours under operating conditions.The objective of this study is to examine the gassing tendency under electrical discharge of aged and unaged mineral oil, and analyze the parameters in degradation, with the aim to see the most significant parameters which can really presents the degradation severity.In this regard, various scenarios were considered. The study was carried on new and aged oil submitted electrical field. The 6802, 6181 and 924 tests are used in measure of parameters in degradation.In this work, the water contents, Interfacial tension, and gas pressure generated,are considered as a parametersignificant of degradation process.These parameters were used as inputsin approach model for prediction the transformer age (life), the result show that the water can be used for detection of early stage of degradation},
	url = {https://www.ijert.org/research/a-multi-regression-approach-for-predicting-the-age-of-transformer-oil-in-thermalelectrical-degradation-IJERTV2IS50470.pdf},
	author = {S. Boudraa and Mokhnache Leila}
}
@article {4819,
	title = {An Improved Proportional Integral Estimator of the Stator Resistance for a Direct Torque Controlled Induction Motor, ISSN 1934-8975},
	journal = { Journal of Energy and Power Engineering},
	volume = { Volume 7},
	number = {11},
	year = {2013},
	pages = { pp. 2144-2155},
	abstract = {In this paper, an improved PI (proportional integral) stator resistance estimation for a DTC(direct torque controlled) induction motor is proposed. This estimation method is based onan on-line stator resistance correction regarding the variations of the stator currentestimation error. In fact, the input variable of the PI estimator is the stator current estimationerror. The main idea is to tune accurately the stator resistance value relatively to theevolution of the stator current estimation error gradient to avoid the drive instability and\&nbsp;{\textellipsis}},
	url = {https://scholar.google.com/scholar?hl=fr\&as_sdt=0\%2C5\&q=An+Improved+Proportional+Integral+Estimator+of+the+Stator+Resistance+for+a+Direct+Torque+Controlled+Induction+Motor\&btnG=},
	author = {Benlarbi Keltoum and Mokrani  Lakhdar and Mokhnache Leila}
}
@article {4813,
	title = {Impact Of Gate Length on Equivalent Circuit Elements In GaAs MESFET Transistors, ISSN / e-ISSN 1682-3427 / 2412-1150},
	journal = {Journal of Electron Devices},
	year = {2013},
	abstract = {In the information science and technology such as computer science, telecommunications, processing of the signals or images transmission, the field effect components plays a major role. We are interested in this study in Schottky gate gallium arsenide field-effect transistors commonly called GaAs MESFET. In this paper, we mainly present the results of calculating the influence of gate length on input and output impedances of GaAs MESFET Transistors, this physical model is based on the analysis of two-dimensional Poisson equation in the active region under the gate. The theoretical results, based on analytical expressions that we have established, are discussed and compared with those of the simulation.\&nbsp;},
	url = {https://www.semanticscholar.org/paper/IMPACT-OF-GATE-LENGTH-ON-EQUIVALENT-CIRCUIT-IN-GaAs-Benbouza-Merabtine/551530687a1a5c11adc12c431729d0a2a19b256c},
	author = {Benbouza Mohamed Salah and Merabtine Nadjim}
}
@proceedings {4805,
	title = {Analysis the Fault detection under Constraint of Command},
	journal = {International Conference on Control Engineering and Information Technology CEIT{\textquoteright}13},
	year = {2013},
	url = {http://fr.scribd.com/doc},
	author = {Benaggoune Said}
}
@proceedings {4804,
	title = {A Fuzzy Adaptive Control  for Double Stator Induction Motor Drives.},
	journal = {from theory to applications - Ouargla - The international conference on electronics  \&oil},
	year = {2013},
	author = {Laamayad tahar}
}
@proceedings {4803,
	title = {Simulation and Determination of the laws Control of the SRM for the Integrated Starter Generator Application},
	journal = {International Conference on Industrial Engineering and Operations Management},
	year = {2013},
	author = {Boudouda malik}
}
@article {4790,
	title = {Reduction of torque ripple in DTC for induction motor using input-output feedback linearization, ISSN 1303-6203},
	journal = {Turk Journal of Electrical Engineering and computer Sciences},
	volume = {Vol.20},
	number = {N{\textdegree}3},
	year = {2013},
	pages = {pp.273-285},
	abstract = {Direct torque control (DTC) is known to produce fast responses and robust control in AC adjustable-speed drives. However, in the steady-state operation, notable torque, flux, and current pulsations occur. In this paper, nonlinear DTC of induction motor drives is presented based on a space vector pulse-width modulation scheme combined with the input-output feedback linearization technique. The variation of stator and rotor resistance due to changes in temperature or frequency deteriorates the performance of the DTC controller by introducing errors in the estimated flux linkage and the electromagnetic torque. This approach will not be suitable for high power drives such as those used in tractions, as they require good torque control performance at a considerably lower frequency. Finally, extensive simulation results are presented to validate the proposed technique. The system is tested at different speeds and a very satisfactory performance is achieved.},
	url = {https://www.researchgate.net/publication/259213292_Reduction_of_Torque_Ripple_in_DTC_for_Induction_Motor_Using_Input-Output_Feedback_Linearization},
	author = {Sebti Belkacem and Naceri Farid}
}
@article {4788,
	title = {Fuzzy adaptive controller based on the Lyapunov Theory for control of the dual star induction machine, ISSN 1582-4594},
	journal = {Journal of Electrical Engineering, Roumanie},
	volume = {Volume 13},
	number = {N{\textdegree}3},
	year = {2013},
	abstract = {In this paper a design of the fuzzy adaptive control(FAC) based on the lyapunov stability theory for improving the dynamic response of the double star induction machine (DSIM) is presented, the fuzzy adaptive control scheme gives fast dynamic response with no overshoot, it has an important feature of being highly robust, insensitive to plant parameters variations, the design procedure is established to control the speed of the machine,the simulation results show that the controller in enhancing the robustness of control systems with high accuracy.},
	url = {https://www.researchgate.net/publication/286470382_Fuzzy_adaptive_controller_based_on_the_Lyapunov_theory_for_control_of_the_dual_star_induction_machine},
	author = {Tahar Laamayad and Naceri Farid and Abdessemed Rachid}
}
@article {4782,
	title = {A NEW Method to Minimize the Chattering Phenomenon in Sliding Mode Control Based on Intelligent Control for Induction Motor Drives, ISSN 1451-4869},
	journal = {Serbian Journal of Electrical Engineering},
	volume = {Volume 10},
	number = {N{\textdegree}2},
	year = {2013},
	pages = {pp. 231-246},
	abstract = {This paper presents new method toward the design of hybrid control with sliding-mode (SMC) plus fuzzy logic control (FLC) for induction motors. As the variations of both control system parameters and operating conditions occur, the conventional control methods may not be satisfied further. Sliding mode control is robust with respect to both induction motor parameter variations and external disturbances. By embedding a fuzzy logic control into the sliding mode control, the chattering (torque-ripple) problem with varying parameters, which are the main disadvantage in sliding-mode control, can be suppressed, Simulation results of the proposed control theme present good dynamic and steady-state performances as compared to the classical SMC from aspects for torque-ripple minimization, the quick dynamic torque response and robustness to disturbance and variation of parameters. },
	url = {http://www.journal.ftn.kg.ac.rs/Vol_10-2/01-Bendaas-Naceri.pdf},
	author = {Bedaas Ismail and Naceri Farid}
}
@proceedings {4776,
	title = {Fuzzy Efficiency Enhancement of Induction Motor Drive},
	journal = { Fourth International Conference on Power Engineering, Energy and Electrical Drives (POWERENG)},
	year = {2013},
	pages = {pp. 175 {\textendash} 180},
	url = {http://ieeexplore.ieee.org/document/6635602/},
	author = {Rouabah Zineb}
}
@article {4773,
	title = {Fast Analytical Modeling of Eddy Current Non-Destructive Testing of Magnetic Material, ISSN / e-ISSN 0195-9298 / 1573-4862},
	journal = {Journal of Nondestructive Evaluation },
	volume = {Volume 32},
	number = {Issue 3},
	year = {2013},
	pages = {pp. 294{\textendash}299},
	abstract = {
	
		
			
				This article presents the modeling of non-destructive testing systems containing magnetic materials using a fast numerical method. Its main aim consists of correcting the half analytical expression of the impedance variation, formulated by some authors, caused by the presence of a conducting plate below of an absolute ferrite core probe. The obtained results of this correction are found to be consistent and satisfactory comparatively to those of finite element method. It also deals with the study the method rapidity by comparing its simulation time to that of the finite element method. As result, the proposed method is found to be very fast and a very short simulation time is required to calculate the sensor impedance. Indeed, for the studied system the coupled circuit simulation time is lower than 1.09 s. This study is appreciable, since it permits to solve quickly the inverse problem by expressing the physical and geometrical features of the material or defect according to the measured parameters. More importantly, this method is applicable to any axi-symmetric systems and can be adapted for the simulation of three-dimensional configurations.
			
		
	

},
	url = {https://link.springer.com/article/10.1007/s10921-013-0182-z},
	author = {Bouchala Tarek and Bachir Abdelhadi and Benoudjit Azeddine}
}
@mastersthesis {5552,
	title = {Etude de la mainenance des panneaux photovoltaique\&rsquo;; Dept. {\'E}lectrotechnique},
	year = {2012},
	author = {Hadj Ahmed and Maiz Bachir}
}
@mastersthesis {5549,
	title = {Failures Analysis for large Turbo Generators},
	year = {2012},
	author = {Berrim Ayoub}
}
@mastersthesis {5527,
	title = {Etude de l\&rsquo;influence des harmoniques de denture et de polarit{\'e} sur la qualit{\'e} du couple dans les Machines {\`a} r{\'e}luctance variable vernier},
	year = {2012},
	author = {SENNI Nabil}
}
@mastersthesis {5526,
	title = {Analyse du fonctionnement d\&rsquo;un moteur pi{\'e}zo-{\'e}lectrique {\`a} onde progressive},
	year = {2012},
	author = {BOUSAAD Abdelhalim}
}
@mastersthesis {5513,
	title = {Etude et simulation d\&rsquo;un bras manipulateur Application {\`a} la r{\'e}alisation d\&rsquo;un programmateur},
	year = {2012},
	author = {Doukari Yacine}
}
@mastersthesis {5512,
	title = {Etude et simulation d\&rsquo;un bras manipulateur Application {\`a} la r{\'e}alisation d\&rsquo;un moteur pas {\`a} pas},
	year = {2012},
	author = {Rahmani Abdelghafour}
}
@mastersthesis {5511,
	title = {Etude et simulation des caract{\'e}ristiques microondes de deux transistors},
	year = {2012},
	author = {Sellaoui Ibtissem}
}
@mastersthesis {5510,
	title = {Etude et conception d\&rsquo;un g{\'e}n{\'e}rateur MESFET GaAs},
	year = {2012},
	author = {Maalla Fatima Zohra}
}
@mastersthesis {5471,
	title = {Etude comparative entre {\'e}olienne horizontale et verticale},
	year = {2012},
	author = {Boultiah Houssam}
}
@mastersthesis {5470,
	title = {Etude pour la Conception d\&rsquo;un Syst{\`e}me de Traction Electrique pour Tramway Utilisant une Machine Asynchrone: 750V- 150kW},
	year = {2012},
	author = {AISSI Abderrezak}
}
@mastersthesis {5462,
	title = {Commande non lin{\'e}aire sans capteur d\&rsquo;une machine {\`a} induction bas{\'e}e sur les r{\'e}seaux de neurones},
	year = {2012},
	author = {AGGAB Zoubir}
}
@mastersthesis {5461,
	title = {Commande par mode de glissement d\&rsquo;une MI en utilisant la technique SVM},
	year = {2012},
	author = {BENKHERROUR  Mohamed}
}
@mastersthesis {5456,
	title = {Commande non Lin{\'e}aire de la Machine Synchrone {\`a} Aimants Permanents sans Capteur de Vitesse. Apport des M{\'e}thodes de l\&$\#$39;Intelligence Artificielle},
	year = {2012},
	author = {FERROUDJ Abdelmalek}
}
@proceedings {4827,
	title = {Artificial Intelligence for Diagnostic Systems Insulations in Power System Insulation},
	journal = {Women in Computer Workshop, NYU, Abu Dhabi 2012},
	year = {2012},
	url = {http://nyuad.nyu.edu/en/news-events/conferences/women-in-computing/2012-women-in-computing/2012-program.html},
	author = {Mokhnache Leila}
}
@proceedings {4817,
	title = {Influence de la Longueur de Grille sur les Imp{\'e}dances d\&rsquo;entr{\'e}e et de sortie du Transistor Mesfet GaAs},
	journal = {7th International Conference on Electrical Engineering},
	year = {2012},
	author = {Benbouza Mohamed Salah}
}
@proceedings {4816,
	title = {Influence of gate length on input impedance and output of GaAs MESFET transistors},
	journal = {Fifth Saudi Science Conference},
	year = {2012},
	author = {Benbouza Mohamed Salah}
}
@proceedings {4815,
	title = {Mod{\'e}lisation et Analyse du Fonctionnement d\&rsquo;un Moteur Pi{\'e}zo-Electrique {\`a} Onde Progressive},
	journal = {International Conference on electrical engineering},
	year = {2012},
	author = {Boussad Abdelhakim}
}
@article {4811,
	title = {Assessment of Direct Torque Control of a Double Feed Induction Machine, ISSN 2250-3021},
	journal = {IOSR Journal of Engineering},
	volume = {2},
	number = {4},
	year = {2012},
	pages = {pp.516-520},
	abstract = {In this paper, we present the application of the control of doubly fed induction machine, using direct torque control (DTC). This method has a simple and robust control structure; the performance of DTC strongly depends on the quality of the estimated actual stator flux and torque. DTC with switching tables provide excellent torque dynamics. The implementation of the DTC applied to a double feed induction motor is validated with simulated results. The results demonstrate that the proposed controller leads to performance improvements despite its simple structure.},
	url = {http://www.iosrjen.org/Papers/vol2_issue4/A024516520.pdf},
	author = {Bouhentala Abd El Malik and Benbouza Med Salah}
}
@article {4809,
	title = {Comparaison de performances de deux structures de MRV vernier {\`a} double denture excit{\'e}es. Application en entra{\^\i}nement direct, ISSN 1112-9697},
	journal = {Revue des Sciences et de la Technologie},
	volume = {1 },
	number = {3},
	year = {2012},
	pages = {pp. 69-78},
	abstract = {Dans le domaine des applications {\`a} basse vitesse, l{\textquoteright}int{\'e}r{\^e}t se porte actuellement sur l{\textquoteright}utilisation de machines {\'e}lectriques directement connect{\'e}es {\`a} la charge. Ceci dans l{\textquoteright}objectif de r{\'e}duire les pannes m{\'e}caniques en supprimant le multiplicateur de vitesse. La pr{\'e}sente communication consiste {\`a} dimensionner et {\`a} {\'e}tudier deux exemples de structures Vernier excit{\'e}es. Dans un premier temps, nous proposons le dimensionnement, en utilisant des approches classiques, de deux machines {\`a} r{\'e}luctance variable excit{\'e}e soit par des aimants permanents ou encore par un circuit triphas{\'e} statorique. Dans une seconde {\'e}tape, nous utilisons une approche num{\'e}rique bas{\'e}e sur le calcul de champs magn{\'e}tiques par la m{\'e}thode des {\'e}l{\'e}ments finis pour {\'e}tudier le fonctionnement des deux prototypes. Enfin, nous comparerons les performances des deux structures en fonctionnement moteur autopilot{\'e}.},
	url = {http://193.194.69.34/rst2/images/vol3n1/8TAIBI.pdf},
	author = {Taibi Soufiane and Haouara Ilhem and Tounzi Abdelmounaim}
}
@proceedings {4808,
	title = {Evaluation de l\&$\#$39;Effet de la Congestion sur le Cout de Production},
	journal = {7th International Conference on Electrical Engineering CEE},
	year = {2012},
	url = {www.cee2012.com},
	author = {Benaggoune Said}
}
@proceedings {4806,
	title = {Optimal Management of Hydropower System},
	journal = {CSM8-ISM International Conference },
	year = {2012},
	url = {http://esm-lb.com/index.php/},
	author = {Benaggoune Said}
}
@proceedings {4802,
	title = {La double DTC d\&rsquo;une  Machine Asynchrone {\`a} Double  Alimentation},
	journal = {CEE{\textquoteright}2012 Batna - 7th International Conference on Electrical Engineering},
	year = {2012},
	author = {Boumaaraf Farid}
}
@article {4796,
	title = {Robust sensorless Control Of BLDC motor using Second derivative Function of the Sum of terminal Voltages, ISSN 1451-4869},
	journal = {Serbian Journal of Electrical Engineering },
	volume = {Vol.10},
	number = {N{\textdegree}2},
	year = {2012},
	pages = {pp.275-291},
	abstract = {This paper proposes a new sensorless control method for the speed and position control of a BLDC Motor. This sensorless drive technique calculates the commutations instants (duration of commutation) by deriving the sum of the terminal voltages of the motor (SigVi). Thus, it is possible to estimate the rotor position (and back EMF of the motor) by only using measurements of the stator line currents and voltages. The implantation of these detectors is easy and cheap. This method is quite robust across variations in stator resistance due to changes in temperature or frequency. With this method the motor can be started without needing the initial position of the rotor. This proposed method is validated through extensive simulations at different speeds, and a very satisfactory performance has been achieved.},
	url = {https://pdfs.semanticscholar.org/bfcf/ccd150273fc6f0145a622698d0d8b885b0c6.pdf},
	author = {Boughaba Abdelali and Chaabane Mabrouk and Benaggoune Said}
}
@article {4783,
	title = {Reduction of torque ripple in DTCfor induction motor using input-output feedback linearization, ISSN 1451-4870},
	journal = {Serbian Journal of Electrical Engineering},
	volume = {Volume 8},
	number = {N{\textdegree}2},
	year = {2012},
	pages = {pp. 97-110},
	abstract = {Direct torque control (DTC) is known to produce fast response and robust control in AC adjustable-speed drives. However, in the steady-state operation, notable torque, flux, and current pulsations occur. In this paper a nonlinear DTC of IM drives is presented based on a Space Vector PWM scheme combined with Input{\textendash}Output Feedback Linearization (IOFL) technique. The variation of stator and rotor resistance due to changes in temperature or frequency deteriorates the performance of DTC controller by introducing errors in the estimated flux linkage and the electromagnetic torque. As a result, this approach will not be suitable for high power drives such as those used in tractions, as they require good torque control performance at considerably lower frequency. Finally, extensive simulation results are presented to validate the proposed technique. The system is tested at different speeds and a very satisfactory performance has been achieved.},
	url = {https://www.researchgate.net/publication/268346664_Reduction_of_Torque_Ripple_in_DTC_for_Induction_Motor_Using_Input-Output_Feedback_Linearization},
	author = {Sebti Belkacem and Naceri Farid}
}
@proceedings {4778,
	title = {Comparaison de deux M{\'e}thodes d\&rsquo;Evaluation du Rendement d\&rsquo;une machine asynchrone},
	journal = { 7{\`e}me Conf{\'e}rence International en G{\'e}nie Electrique CEE  Universit{\'e} de Batna, Batna, Alg{\'e}rie},
	year = {2012},
	pages = { pp. 267-271},
	author = {S. Chakroun}
}
@proceedings {4777,
	title = {Design and Optimization of Axial Flux Permanent Magnet DC Machines with Double Air-Gap},
	journal = {7{\`e}me Conf{\'e}rence International en G{\'e}nie Electrique CEE  Universit{\'e} de Batna, Batna, Alg{\'e}rie},
	year = {2012},
	pages = { pp. 261-265},
	author = {M. Bendib}
}
@article {4774,
	title = {An Improved Search-based Algorithm for Fuzzy-Logic Efficiency Optimization of Induction Motor Drives, ISSN 1223 - 057X},
	journal = {Electromotion Journal},
	year = {2012},
	author = {Rouabah Zineb and Zidani Fatiha and Bachir Abdelhadi}
}
@mastersthesis {5519,
	title = {Mod{\'e}lisation d\&rsquo;un actionneur pi{\'e}zo-{\'e}lectrique {\`a} onde progressive},
	year = {2011},
	author = {Mis. H}
}
@mastersthesis {5518,
	title = {Etude de l\&rsquo;influence des harmoniques de denture et de polarit{\'e} sur la qualit{\'e} du couple dans les MRV {\`a} double denture excit{\'e}e},
	year = {2011},
	author = {BELLI. F and BOUKHALFA. A}
}
@mastersthesis {5509,
	title = {Diagnostic et simulation par r{\'e}seaux de neurone application {\`a} la machine asynchrone},
	year = {2011},
	author = {Dahah Fouaz}
}
@mastersthesis {5464,
	title = {Contribution {\`a} la commande directe du couple de la machine {\`a} induction},
	year = {2011},
	author = {Belkacem Sebti}
}
@mastersthesis {5463,
	title = {Contr{\^o}le direct du couple du moteur {\`a} induction sans capteur de vitesse assoici{\'e} {\`a} un observateur non lin{\'e}aire},
	year = {2011},
	author = {DISSA Abdennour}
}
@proceedings {4801,
	title = {Fuzzy adaptive approach for control the dual star induction machine DSIM},
	journal = {CIAM{\textquoteright}11 Oran. - International Conference on Automation and Machatronics },
	year = {2011},
	author = {Laamayad tahar}
}
@article {4789,
	title = {Improvement in DTC-SVM of AC drives using a new robust adaptive control algorithm, ISSN 1598-6466},
	journal = {International journal of control automation and system, IJCAS},
	volume = {9},
	number = {2},
	year = {2011},
	pages = {pp. 267{\textendash}275},
	abstract = {In this paper a new robust adaptive speed controller algorithm for AC motor drives is presented. The main feature of this algorithm is that minimum synthesis is required to implement the strategy. MCS algorithm is a significant development of MRAC. The stability of the proposed system is achieved through Popov{\textquoteright}s Hyperstability criteria. The new algorithm appeared to be robust in the face of totally unknown plant dynamics, external disturbances and parameter variations with the plant. Finally, a new approach has been successfully implemented on DTC-SVM. Extensive simulation results are presented to validate the proposed technique. The system is tested at different speeds and a very satisfactory performance has been achieved.},
	url = {https://link.springer.com/article/10.1007/s12555-011-0208-1},
	author = {Sebti Belkacem and Naceri Farid}
}
@proceedings {4779,
	title = {Conception Optimale d\&rsquo;une Machine Synchrone {\`a} Aimants Permanents {\`a} Rotor Externe},
	journal = {Journ{\'e}es Nationales sur la Conception et l{\textquoteright}Optimisation en Electrotechnique,  JNCOE{\textquoteright}2011, Jijel, Alg{\'e}rie},
	year = {2011},
	author = {A. Chibani}
}
