@proceedings {3101,
	title = {New MRAS Approach for Sensorless control of IM},
	journal = {19th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA)},
	year = {2019},
	pages = {36-40},
	abstract = {In this paper we present a new approach of MRAS based on current model only. This technique aims to offsets compensating and solving problems of ordinary MRAS in low speed. Also this new approach allows us to estimate the components of the rotor flux and the rotor speed without using the voltage model. The results of the simulation and the experimental results are presented and show the effectiveness of the proposed technique.},
	author = {Y. Beddiaf and F. Zidani and undefined}
}
@proceedings {3099,
	title = {Modified Robust Model Reference Adaptive System Scheme for a Speed Sensorless Vector Control of Induction Motor},
	journal = {19th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA)},
	year = {2019},
	pages = {473-478},
	abstract = {This paper presents a robust rotor speed sensorless control strategy for induction motor. The main purpose is to overcome the instability issue for zero/low speed operating mode while considering that the rotor resistance is subject to uncertainties or variations. A Modified Model Reference Adaptive System speed estimation scheme is presented, and its sensitivity to stator resistance mismatches is investigated. The proposed approach introduces a discrete reference and adjustable models of the motor. Moreover, an adaptive discrete speed estimation scheme is synthesized on the basis of the extended Kalman filter technique. The proposed sensorless control scheme is tested using the professional Hardware simulator AMEsim (LMS). The obtained results confirm the superiority and ability of the proposed method compared to the classic Model Reference Adaptive System speed estimation scheme to guarantee a\&nbsp;{\textellipsis}},
	author = {M. Bahloul and AN. Vargas and L. Chrifi Alaoui and S. Drid and M. Chaabane}
}
@proceedings {3144,
	title = {New Synergetic Control for an Induction Motor with a synergetic Speed and Rotor Flux Estimation},
	journal = {ICCEE{\textquoteright}18 International conference on communications and electrical engineering},
	year = {2018},
	author = {H. Khelloufi and S. Benaicha}
}
@proceedings {3142,
	title = {Robust Dynamic surface control of interior Permanent Magnet  Synchronous Motors},
	journal = {international conference on Electronics, Energy and measurement (IC2EM)},
	year = {2018},
	author = {S. Nadji and S. Benaicha}
}
@proceedings {3138,
	title = {Robust Backstepping control with integral action of IPM Synchronous Motor},
	journal = {The Third international conference on Electrical sciences and technologies in Maghreb (CISTEM)},
	year = {2018},
	author = {S. Nadji and S. Benaicha and N. Sabeur and M. Zaihidee}
}
@proceedings {3100,
	title = {dSPACE Validation of Improved Backstepping Optimal Energy Control for Photovoltaic Systems},
	journal = { 6th International Renewable and Sustainable Energy Conference (IRSEC)},
	year = {2018},
	pages = {1-6},
	address = {IEEE},
	abstract = {In this paper, an efficient and fast MPPT power control of photovoltaic systems based on backstepping approach is presented. The proposed control scheme consists of two cascade loops; in the first loop, the auto-scaling variable step-size perturb and observe MPPT technique estimates the reference voltage of all electrical load values. The robust backstepping controller has been adopted to remove steady state oscillations in the second loop. Further, the performance of proposed control system has been analyzed through dSPACE DS-1104 experimental validation with Isofoton photovoltaic module under real climatic conditions at Biskra (Algeria) region. The results obtained by the used controller averred a good improvement.},
	author = {N. Benbaha and F. Zidani and MS. Nait-Said and S. Zouzou and S. Boukebbous and H. Ammar}
}
@proceedings {2040,
	title = {Implementation of finite set model predictive current control for shunt active filter},
	journal = {9th International in Renewable Energy Congress (IREC), },
	year = {2018},
	abstract = {The present paper investigates the effectiveness of Finite Set Model Predictive Current Control (FS-MPCC) for Shunt Active Filter SAF and its implementation on real bench. The method uses a Multivariable Filter MVF to extract the fundamental components of currents and voltages of the grid. The predictive control method uses a cost function containing the error of the filtered currents to be controlled. The performances of the control method are revealed throw simulation and experimental results and then commented. The obtained results show that predictive control is a powerful control method for such application in term of tracking performance and quality energy.},
	author = {A. Yahia Cherif and H. Laib and K. Barra}
}
@proceedings {2030,
	title = {Implementation of power management based on fuzzy logic for a hybrid PV/Fuel Cell generation system},
	journal = { International Conference On Emerging and Renewable Energy : Generation and Automation,  Sousse-Tunisia},
	year = {2018},
	pages = {1-6},
	abstract = {The present paper deals with a real time implementation of a new adaptive frequency-based power management strategy of a small-scale hybrid battery-super capacitor system, dedicated to an electric vehicle. The ultimate objective of the strategy is to ensu},
	author = {M. Sellali and A. Betka and S. Drid and A. Djerdir and M. Tiar and S. Abdedaim}
}
@proceedings {1982,
	title = {Optimal Coordination Time Interval for DOCRs in Presence of D-FACTS},
	journal = {IEEE 5th International Congress on Information Science and Technology (CiSt), Marrakech, Morocco},
	year = {2018},
	pages = {477-480},
	address = {IEEE},
	abstract = {The paper presents a LP-Dual Simplex algorithm for linear constrained optimization problems. This approach proposed for the optimal coordination of Directional Over-Current Relays (DOCRs) in compensated distribution power systems with Distribution-FACTS devises i.e. Thyristor Controlled Series Capacitor (TCSC). The optimization problem is subject to a number of constraints which are mainly focused on the operation of the backup relay, which should operate if a primary relay fails to respond to the fault near to it, Time Dial Setting (TDS), Plug Setting (PS) and the minimum operating time of a relay. The system used to check the efficiency of the optimization algorithm which is IEEE 33-bus models.},
	author = {L. Bougouffa and A. Chaghi}
}
@proceedings {1977,
	title = {Direct Power Control of DFIG by Sliding Mode Control and Space Vector Modulation},
	journal = {7th International Conference on Systems and Control (ICSC), Valencia, Spain},
	year = {2018},
	pages = {462-467},
	address = {IEEE},
	abstract = {This paper presents a comparative study of two approaches for the direct power control (DPC) of doubly-fed induction generator (DFIG) based on wind energy conversion system (WECS). Vector Control (VC) and Sliding Mode Control (SMC). The simulation results of the DFIG of 5 KW in the presence of various uncertainties were carried out to evaluate the capability and robustness of the proposed control scheme. The (SMC) strategy is the most appropriate scheme with the best combination such as reducing high powers ripple, diminishing steady-state error in addition to the fact that the impact of machine parameter variations does not change the system performance.},
	author = {F. Mazouz and S. Belkacem and I. Colak and S. Drid}
}
@proceedings {1976,
	title = {An advanced energy management system with an economical optimization for a multi-sources stand-alone Home},
	journal = {7th International Conference on Systems and Control (ICSC), Valencia, Spain},
	year = {2018},
	pages = {154-159},
	address = {IEEE},
	abstract = {This paper proposes an advanced energy management system (EMS) for a stand-alone hybrid energy system. The considered hybrid system includes a photovoltaic panel, a fuel cell, an electrolyzer and a battery bank. The EMS aims to optimize the utilization cost of the hybrid power system and to improve its energy balance with the elimination of any energy deficit.The hybrid power system has been tested by simulation using models implemented in Matlab/Simulink software. The simulation is performed over a long period of time in order to evaluate the effectiveness of the management strategy. The simulation results confirm the efficiency of the proposed control strategy, as it increases the reliability of the system and improves its energy balance.},
	author = {T. Alnejaili and L. Chrifi Alaoui and D. Mehdi and A. Alibi and S. Drid}
}
@proceedings {1975,
	title = {Control and optimal management of a multi-source energy system},
	journal = {7th International Conference on Systems and Control (ICSC), Valencia, Spain},
	year = {2018},
	pages = {164-168},
	address = {IEEE},
	abstract = {The main aim of this work is to develop an energy management algorithm (EMS) that control renewable energy system that consists of PV panels, lead acid battery banks and supercapacitor. On addition to that a Graphical user interfaces is developed to control the power system. The efficiency of the controller was tested by the mean of simulation, the result assume the effectiveness of the proposed control method and the intelligent management of the power flow controller.},
	author = {T. Alnejaili and A. Alibi and L. Chrifi Alaoui and D. Mehdi and H. Sahraoui and S. Drid}
}
@proceedings {1974,
	title = {dSPACE Real-Time Implementation Sliding Mode Maximum Power Point Tracker for Photovoltaic system},
	journal = {7th International Conference on Systems and Control (ICSC), Valencia, Spain},
	year = {2018},
	pages = {137-141},
	address = {IEEE},
	abstract = {Maximum power point trackers are so important in photovoltaic systems to improve their overall efficiency. This paper presents a photovoltaic system with maximum power point tracking facility. An intelligent Sliding mode controller method is proposed in this paper to achieve the maximum power point tracking of PV modules. The system consists of a photovoltaic solar module connected to a DC-DC boost converter. The system is modeled using MATLAB/SIMULINK. The system has been experienced under disturbance in the photovoltaic loads and irradiation levels. The simulation results show that the proposed maximum power tracker tracks the maximum power accurately and successfully in all tested conditions. The MPPT system is then experimentally implemented. DSPACE is used in the implementation of the MPPT hardware setup for real-time control. Data acquisition and system control are implemented using dSPACE 1104 software and digital signal processor card. The experimental results show the efficiency of the proposed algorithm and confirm the simulation results.},
	author = {T. Boutabba and A. Alibi and L. Chrifi Alaoui and M. Ouriagli and S. Drid and D. Mehdi and MEH. Benbouzid}
}
@proceedings {1973,
	title = {The dynamic control and optimal management of the energy in the case of a territory isolated in Batna city},
	journal = {7th International Conference on Systems and Control (ICSC), Valencia, Spain},
	year = {2018},
	pages = {160-163},
	address = {IEEE},
	abstract = {This paper deals with the optimal sizing and management of power system for medium rural health clinic located in the Batna region (Algeria). The study evaluates different power configurations depending on economic, environmental and technical characteristics. The main objective is to cover the entire loads with an uninterruptible, high quality power supplies with lowest cost of energy and high renewable energy penetration.},
	author = {H. Sahraoui and L. Chrifi Alaoui and M. Ouriagli and S. Drid and D. Mehdi and P. Bussy and T. Alnejaili}
}
@proceedings {1972,
	title = {Experimental control of a Doubly Fed Induction Generator based Wind Energy Conversion System},
	journal = {2018 7th International Conference on Systems and Control (ICSC), Valencia, Spain},
	year = {2018},
	pages = {142-147},
	address = {IEEE},
	abstract = {In recent years, electrical energy has become a vital component for human life. Moreover, the interest for alternative energy sources has an exponential rise nowadays as a consequence of the limitation in conventional energy sources. Wind energy is considered one of the most important renewable energy sources. Nowadays, in order to ensure an optimal energy use, management and control technologies of wind energy conversion system are developed rapidly. In this paper, both of the vector controller and sliding mode control strategy for an isolated doubly fed induction generator-based wind energy conversion system are studied, described, tested and compared. In order to ensure the safety of the connected load, the main purpose of the present work is to maintain output stator voltage and frequency at their reference values whether for load demand power variations and wind speed fluctuations. Experimental results demonstrate the effectiveness of the presented control strategies.},
	author = {N. Bouchiba and S. Keskes and S. Sallem and L. Chrifi Alaoui and S. Drid and MBA. Kammoun}
}
@proceedings {1971,
	title = {Implementation of new adaptive power-split management strategy in a battery-super capacitor electric vehicle},
	journal = {2018 International Conference on Electrical Sciences and Technologies in Maghreb (CISTEM) IEEE},
	year = {2018},
	pages = {1-6},
	address = {IEEE},
	abstract = {The present paper deals with a real time implementation of a new adaptive frequency-based power management strategy of a small-scale hybrid battery-super capacitor system, dedicated to an electric vehicle. The ultimate objective of the strategy is to ensure a smart use of the two sources, improving as a consequence both the autonomy and the system lifetime. To do so, and unlike the conventional power frequency separation technique, the filter adapts its pass band frequency to keep the charge{\textquoteright}s state of each source in a tolerable range and provides power amounts to the load demand. The experimental results demonstrate that the system commutates smoothly between the operating modes, which proves the effectiveness of the proposed control techniques.},
	author = {M. Sellali and A. Betka and S. Drid and A. Djerdir and M. Tiar and S. Abdedaim}
}
@proceedings {3136,
	title = {Integral Backstepping  Control  of PMSM for Electrical Vehicle ApplicationOctober},
	journal = {International Conference on~ Electrical Engineering -ICEE{\textquoteright}2017},
	year = {2017},
	author = {S. Nadji and S. Benaicha}
}
@proceedings {1979,
	title = {Management, optimization and conversion of energy for self-governing house},
	journal = {2017 International Conference on Control, Automation and Diagnosis (ICCAD),Hammamet, Tunisia},
	year = {2017},
	pages = {429-433},
	address = {IEEE},
	abstract = {The problematic is to study the management of a hybrid energy system, depending on demand, dedicated to self-governing houses. Energy can be supplied by a photovoltaic panel, a wind turbine and a diesel generator and it can be stored in batteries. The study of this type of systems requires a good control strategy and an effective management. The main objective of this study is to develop a reliable management model and to simulate the hybrid system of a house located in Monastir-Tunisia, with different domestic loads, such as a washing machine, freezer, refrigerator... A system of energy management that can adjust, optimize and adapt the consumption to the available energy resources while satisfying the request is then examined. Thus, to study the problem of energy management and reduce energy consumption and production of greenhouse gases, the definition off an analysis tool on MATLAB/SIMULINK has allowed the covering of load demand in an optimized manner using the optimal system chosen by HOMER.},
	author = {M. Hamdi and L. Chrifi Alaoui and S. Drid and N. Bouguila}
}
@proceedings {1978,
	title = {A real-time Backstepping control strategy for a doubly fed induction generator based wind energy conversion system},
	journal = {2017 6th International Conference on Systems and Control (ICSC), Batna, Algeria},
	year = {2017},
	pages = {549-554},
	address = {IEEE},
	author = {N. Bouchiba and A. Barika and L. Chrifi Alaoui and S. Drid and S. Sallem and MBA. Kammoun}
}
@proceedings {1893,
	title = {Optimal Energy Control of Induction Motor Standalone Photovoltaic-Battery Pumping System},
	journal = {6th International Conference on Systems and Control},
	year = {2017},
	author = {N. Benbaha and F. Zidani and MS. Nait-Said and S. Boukebbous and H. Ammar}
}
@proceedings {2214,
	title = {A comparative study of PI and Sliding mode controllers for autonomous wind energy conversion system based on DFIG},
	journal = {17th International conference on Sciences and Techniques of Automatic control \& computer engineering , STA{\textquoteright}2016},
	year = {2016},
	author = {A. Barkia and N. Bouchiba and S. Sallem and L. Chrifi Alaoui and S. Drid and MBA. Kammoun}
}
@proceedings {2213,
	title = {Analysis and Design of rotor MRAS Speed Sensorless with a Novel Approach},
	journal = {the 17th International conference~ on Sciences and Techniques of Automatic control \& computer engineering, STA{\textquoteright}2016},
	year = {2016},
	author = {I. Benlaloui and S. Drid and L. Chrifi Alaoui and B. Marhic and M. Ouriagli}
}
@proceedings {2212,
	title = {Flux Observers Design for Induction Motor using Linear Parameter Varying Observer and Sliding Mode Observer},
	journal = {the 17th International conference on Sciences and Techniques of Automatic control \& computer engineering, STA{\textquoteright}2016},
	year = {2016},
	author = {I. Benlaloui and D. Khamari and S. Drid and L. Chrifi Alaoui and M. Hamzaoui}
}
@proceedings {2211,
	title = {Nonlinear Control of the Doubly Fed Induction Generator used with Wind Turbine for an Isolated Grid},
	journal = {17th International conference on Sciences and Techniques of Automatic control \& computer engineering , STA{\textquoteright}2016},
	year = {2016},
	author = {Y. Belkacem and S. Drid and A. Makouf and S. Bouslimani and L. Chrifi Alaoui and B. Marhic}
}
@proceedings {2210,
	title = {Samir BOUSLIMANI, Said DRID and L. CHRIFI ALAOUI, Pascal Bussy and Mohamed \&ldquo;Inter-Turn Faults Detection using Park Vector Strategy},
	journal = {the 17th International conference on Sciences and Techniques of Automatic control \& computer engineering,STA{\textquoteright}2016},
	year = {2016},
	author = {S. Bouslimani and S. Drid and L. Chrifi Alaoui and P. Bussy and M. Hamzaoui}
}
@proceedings {2208,
	title = {Impact of RDG Penetration on IDMT Overcurrent Relay Operation in Radial MV Distribution System},
	journal = {International Conference on Recent Advances in Electrical Systems (ICRAES) 2016},
	year = {2016},
	author = {K. Melizi and K. Sebaa and M. Zellagui and A. Tlem{\c c}ani and A. Chaghi}
}
@proceedings {2207,
	title = {Electromagnetic, flow and thermal coupling in a MHD pump taking account the saturation of the ferromagnetic material},
	journal = {Eleventh International Conference on Ecological Vehicles and Renewable Energies~(EVER{\textquoteright}16)EVER{\textquoteright}2016},
	year = {2016},
	abstract = {This paper deals with robust direct power control of a grid-connected brushless doubly-fed induction generator(BDFIG). Using a nonlinear feedback linearization strategy, an attempt is made to improve the desired performances by controlling the generated stator active and reactive power in a linear and decoupled manner. Therefore, to achieve this objective, the Lyapunov approach is used associated with a sliding mode control to guarantee the global asymptotical stability. Thus, an optimal operation of the BDFIG in sub-synchronous operation is obtained as well as the stator power flows with the possibility of keeping stator power factor at a unity. The proposed method is tested with the Matlab/Simulink software. Simulation results illustrate the performances and the feasibility of the designed control.},
	author = {FZ. Kadid and MS. Aggoune and S. Drid}
}
@proceedings {2028,
	title = {A new flux rotor based MRAS for sensorless control of induction motor},
	journal = {5th International Conference on Systems and Control (ICSC), Marrakesh, Morocco},
	year = {2016},
	pages = {365-370},
	address = {IEEE},
	abstract = {A model reference adaptive system (MRAS) based speed estimator for sensorless induction motor (IM) drive is proposed in this paper. The MRAS is formed with flux rotor and the estimated stator current vector. The reference model utilizes measured current vector. On the other hand, the adjustable model uses the estimated stator current vector. The current is estimated through the solution of machine state equations. The performance of the estimator under regeneration is an important aspect, which is studied in this paper through the small signal analysis. In this paper, the principle and method of speed estimation and control set-up are described, as well as the results of an experiment that verified the effectiveness of the proposed method.},
	author = {R. Saifi and N. Nait-Said and A. Makouf and L. Chrifi Alaoui and S. Drid}
}
@proceedings {1895,
	title = {Robust Backstepping MPPT for Photovoltaic System},
	journal = {3rd International~conference on green energy \& Environmental engineering GEEE{\textquoteright}2016},
	year = {2016},
	author = {N. Benbaha and F. Zidani and MS. Nait-Said}
}
@proceedings {2692,
	title = {Investigation of TCSC Controller Effect on IDMT Directional Over-current Relay},
	journal = {World Conference on Technology, Innovation and Entrepreneurship},
	year = {2015},
	author = {L. Bougouffa and A. Chaghi}
}
@proceedings {2492,
	title = {Advanced Supervisor Control for A Stand- Alone Photovoltaic Super Capacitor Battery Hybrid Energy system for Remote Building},
	journal = {The 4 th  International Conference on Systems and Control},
	year = {2015},
	author = {T. Alnejaili and M. Driss and S. Drid and L. Chrifi Alaoui}
}
@proceedings {2490,
	title = {Modeling and Analysis of the Photovoltaic array Faults},
	journal = {3rd International Conference on Control, Engineering \& Information Technology CEIT{\textquoteright}2015},
	year = {2015},
	author = {A. Fezzani and I. Hadj Mahammed and S. Drid and L. Chrifi Alaoui}
}
@proceedings {2489,
	title = {Voltage control of DC-DC Buck Converter using Second Order Sliding Mode Control},
	journal = {3rd International Conference on Control, Engineering \& Information Technology CEIT{\textquoteright}2015},
	year = {2015},
	author = {H. Sahraoui and S. Drid and L. Chrifi Alaoui and M. Hamzaoui}
}
@proceedings {2488,
	title = {Sliding Mode Control Of A Multi-Source Renewable Power System},
	journal = {3rd International Conference on Control, Engineering \& Information Technology CEIT{\textquoteright}2015},
	year = {2015},
	author = {T. Alnejaili and S. Drid and M. Driss and L. Chrifi Alaoui and H. Sahraoui}
}
@proceedings {2487,
	title = {Experimental evaluation of induction motor robust control using sliding mode linearization technique},
	journal = {the 3rd International Conference on Control, Engineering \& Information Technology (CEIT{\textquoteright}2015)},
	year = {2015},
	author = {H. Benderradji and L. Chrifi Alaoui and S. Drid and A. Makouf}
}
@proceedings {2486,
	title = {Robust Flux and Load Torque Estimation in Induction Machine},
	journal = {14 th International European Control Conference},
	year = {2015},
	author = {M. Bahloul and L. Chrifi Alaoui and M. Souissi and M. Chaabane and S. Drid}
}
@proceedings {2031,
	title = {PMSM model with inter-turn fault},
	journal = {2015 4th International Conference on Electrical Engineering (ICEE)},
	year = {2015},
	pages = {1-5},
	address = {IEEE},
	abstract = {Stator winding faults are one of most frequent PMSM motor damages resulting from the degradation of the inter-turn, inter-phase and main isolation of the motor winding. So this paper presents a dynamic model for PMSM with inter-turn fault. The faulty model is used for studying the machine behavior and extracting the fault signatures.},
	author = {C. Bouchareb and MS. Nait-Said}
}
@proceedings {1945,
	title = {Mod{\'e}lisation des D{\'e}fauts de Cassure de Barres de la Machine Asynchrone par Superposition de Matrices},
	journal = {1st International Conference on Applied Automation and Industrial Diagnostics (ICAAID 2015)},
	year = {2015},
	author = {BS. Dhahbi and N. Nait-Said and MS. Nait-Said}
}
@proceedings {1934,
	title = {Backstepping Controller for a Wheeled Mobile Robot},
	journal = {the 4 International Conference on Systems and Control},
	year = {2015},
	author = {G. Zidani and S. Drid and L. Chrifi Alaoui and A. Benmakhlouf and S. Chaouch}
}
@proceedings {2704,
	title = {Optimal Setting and Coordination of Industrial Power Systems Protection using PSO and ETAP Software},
	journal = {3rd International Conference on Industrial Engineering and Manufacturing (ICIEM)},
	year = {2014},
	author = {R. Benabid and M. Zellagui and A. Chaghi and M. Boudour}
}
@proceedings {2703,
	title = {The Impact of Conduction Angle on Short Circuit Calculations in Case of Three Phase Fault for a FACTS Controlled Transmission Line in the Algerian Network},
	journal = {International Conference on Automatic Control Theory and Application (ACTA)},
	year = {2014},
	author = {M. Zellagui and HA. Hassan and A. Chaghi}
}
@proceedings {2702,
	title = {Intelligent Overcurrent Relays Setting based on Mixed Integer Optimization and Considering Series Compensation, Fault Resistance and Relays Characteristics},
	journal = { International Conference of Modeling and Simulation (ICMS)},
	year = {2014},
	author = {R. Benabid and M. Zellagui and M. Boudour and A. Chaghi}
}
@proceedings {2701,
	title = {Compensated Distribution Systems with TCSC in Presence of Phase to Earth Fault},
	journal = {2nd International Conference on Electrical Energy and Systems (ICEES)},
	year = {2014},
	author = {L. Bougouffa and A. Chaghi}
}
@proceedings {2700,
	title = {Impact of Voltage Controlled by TCVR on Ground Fault Parameters\&quot;, International Workshop on Advanced Control (IWAC)},
	year = {2014},
	author = {M. Zellagui and HA. Hassan and A. Chaghi}
}
@proceedings {2699,
	title = {Coordination of IDMT Directional Over-Current Relays in 400 KV Transmission Line Compensated with TCSC},
	journal = {8th International Conference on Electrical Engineering (CEE)},
	year = {2014},
	author = {L. Bougouffa and A. Chaghi}
}
@proceedings {2698,
	title = {Effect of Fault Location on Short-Circuit Calculations in Case of Phase to Earth Fault for a Line Compensated by TCVR},
	journal = {8th International Conference on Electrical Engineering (CEE)},
	year = {2014},
	author = {M. Zellagui and HA. Hassan and A. Ghodbane and A. Chaghi}
}
@proceedings {2697,
	title = {Impact of Renewable Dispersed Generation on Performance of Directional Overcurrent Relay on MV Distribution Power System},
	journal = {8th International Conference on Electrical Engineering (CEE)},
	year = {2014},
	author = {M. Zellagui and M. Karimi and H. Mokhlis and R. Benabid and A. Chaghi}
}
@proceedings {2696,
	title = {Impact Studies of the Current Harmonics on the Setting and Coordination of Directional Overcurrent Relays},
	journal = {2nd International Conference on Electrical Engineering and Control Applications (ICEECA)},
	year = {2014},
	author = {R. Benabid and M. Zellagui and A. Chaghi and M. Boudour}
}
@proceedings {2695,
	title = {Mixed Integer Optimization using PSO Algorithm for Optimal Settings Overcurrent Relays in the Presence of Wind Energy Farms},
	journal = {2nd International Conference on Electrical Engineering and Control Applications (ICEECA)},
	year = {2014},
	author = {M. Zellagui and R. Benabid and M. Boudour and A. Chaghi}
}
@proceedings {2694,
	title = {Investigation of TCSC Controller and Distributed Generation Effects on IDMT Directional Overcurrent Relay in Distribution System},
	journal = {1st International Conference on Electrical Engineering (ICEEB)},
	year = {2014},
	author = {L. Bougouffa and A. Chaghi}
}
@proceedings {2693,
	title = {A Comparative Study on the Effects of Using Resistive and Inductive SFCL on Short-Circuit Calculations in the Presence of a Phase to Ground Fault},
	journal = {1st International Conference on Electrical Engineering (ICEEB)},
	year = {2014},
	author = {M. Zellagui and HA. Hassan and A. Chaghi}
}
@proceedings {2543,
	title = {Robust Control of the Photovoltaic System with Improved Maximum Power Point Tracking},
	journal = {Ninth International Conference on Ecological Vehicles and Renewable Energies~EVER{\textquoteright}2014},
	year = {2014},
	author = {S. Drid and L. Chrifi Alaoui and M. Ouriagli and P. Bussy}
}
@proceedings {2542,
	title = {Neural Direct Torque Control for Induction Motor under Voltage Source Inverter Open Switch Fault},
	journal = {Ninth International Conference on Ecological Vehicles and Renewable Energies EVER{\textquoteright}2014},
	year = {2014},
	author = {F. Kadri and D. Djarah and S. Drid and F. Djeffal and L. Chrifi Alaoui}
}
@proceedings {2540,
	title = {Modeling and control of the DC-DC converters},
	journal = {International Conference on Industrial Engineering \& Manufacturing ICIEM{\textquoteright}14},
	year = {2014},
	author = {H. Sahraoui and S. Drid and L. Chrifi Alaoui and I. Benlaloui}
}
@proceedings {2539,
	title = {Design and implementation of a modified DC-DC converter suitable for charging solar batteries},
	journal = {International Conference on Industrial Engineering \& Manufacturing ICIEM{\textquoteright}14},
	year = {2014},
	author = {T. Alnejaili and S. Drid}
}
@proceedings {2538,
	title = {Design and implementation of a modified DC-DC converter suitable for charging solar batteries},
	journal = {he 3 rd International Seminar on New and Renewable Energies},
	year = {2014},
	author = {T. Alnejaili and S. Drid}
}
@proceedings {2537,
	title = {Second Order Sliding Mode Controller of the DC-DC Buck Converter used in Photovoltaic Systems},
	journal = {Conference on Electrical Engineering and Control Applications ICEECA{\textquoteright}2014},
	year = {2014},
	author = {H. Sahraoui and S. Drid and L. Chrifi Alaoui}
}
@proceedings {2531,
	title = {Robust Control of the Boost Converter applied in Photovoltaic Systems using Second Order Sliding Mode},
	journal = {15th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {H. Sahraoui and S. Drid and L. Chrifi Alaoui and M. Ouriagli and P. Bussy}
}
@proceedings {2500,
	title = {Backstepping Control Strategy of a Hybrid Generation System Based on a Photovoltaic Array and a Fuel Cell},
	journal = {1st International Conference on Electrical Engineering, ICEEB{\textquoteright}14},
	year = {2014},
	author = {M. Tiar and A. Betka and S. Drid}
}
@proceedings {2499,
	title = {MATLAB-Based Modeling of Shading Effects in Photovoltaic arrays},
	journal = {", 15th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {A. Fezzani and I. Hadj-Mahammed and S. Drid}
}
@proceedings {2498,
	title = {The PBC technical to control the induction motor},
	journal = {15th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {K. Baazouzi and AD. Bensalah and S. Drid}
}
@proceedings {2497,
	title = {Advanced Strategy of Demand-Side Management for Photovoltaic-Wind Energy System},
	journal = {15th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {T. Alnejaili and S. Drid and D. Mehdi and L. Chrifi Alaoui}
}
@proceedings {2495,
	title = {Nonlinear Tracking Control of a Wheeled Mobile Robot},
	journal = {15th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {G. Zidani and S. Drid and L. Chrifi Alaoui and D. Arar and P. Bussy}
}
@proceedings {2494,
	title = {An Extended Park\&rsquo;s Vector Approach to Detect Broken Bars Faults in Induction Motor},
	journal = {15th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {S. Bouslimani and S. Drid and L. Chrifi Alaoui and P. Bussy and M. Ouriagli and L. delahoche}
}
@proceedings {2493,
	title = {A Hybrid Power Generations System (Wind Turbine/Photovoltaic)},
	journal = {5th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {T. Boutabba and S. Drid and MEH. Benbouzid}
}
@proceedings {1949,
	title = {Application of an Improved Dynamic Hysteresis Model on a Non-Oriented Sheet with Mean Frequency Magnetization Field},
	journal = {International Conference on Advanced Technology \& Sciences (ICAT{\textquoteright}14)},
	year = {2014},
	author = {S. Hamada and FZ. Louai and N. Nait-Said}
}
@proceedings {1948,
	title = {A Meshless Element-Free Galerkin Algorithm for Nonlinear Electromagnetic field Computatrion},
	journal = { 3rd International Conference on Competetive Materials and Technology  Processes (ic-cmtp3)},
	year = {2014},
	author = {L. Chelghoum and FZ. Louai and N. Nait-Said}
}
@proceedings {1947,
	title = {Analysis of Different Converters Used in Wind Energy Conversion System},
	journal = {International Renewable and Sustainable Energy Conference (IRSEC 2014)},
	year = {2014},
	author = {A. Dahbi and N. Nait-Said and M. Hamouda and F.Z Arama}
}
@proceedings {1940,
	title = {Sensorless Speed Backstepping Control of Induction Motor Based on Sliding Mode Observer:Experimental Results},
	journal = {15th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {I. Benlaloui and S. Drid and L. Chrifi Alaoui and D. Benoudjit}
}
@proceedings {1939,
	title = {Robust Control of Permanent Magnet Synchronous Motor},
	journal = {15th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {A. Fezzani and S. Drid and A. Makouf and L. Chrifi Alaoui and M. Ouriagli and L. delahoche}
}
@proceedings {1938,
	title = {A Comparative Study of Rotor Flux Estimation in Induction Motor with a Linear Parameter Varying Observer and Kalman Filter},
	journal = {5th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {I. Benlaloui and S. Drid and L. Chrifi Alaoui and D. Benoudjit and D. Khamari and M. Ouriagli}
}
@proceedings {1896,
	title = {Modified speed sensorless indirect field-oriented control of induction motor using PLL},
	journal = {5th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {Y. Beddiaf and L. Chrifi Alaoui and F. Zidani and S. Drid}
}
@proceedings {2768,
	title = {P-Q Decoupled Control Scheme Using Fuzzy Logic Control for the Unified Power Flow Controller},
	journal = {2nd International Conference on Electronics and Oil (ICEO)},
	year = {2013},
	author = {K. Berrahal and A. Chaghi}
}
@proceedings {2766,
	title = {Effect of GCSC Parameters on Distance Relay Measured Impedance in the Presence of Phase to Earth Fault},
	journal = {2nd International Conference on Electronics \& Oil (ICEO)},
	year = {2013},
	author = {M. Zellagui and A. Chaghi}
}
@proceedings {2765,
	title = {Effect of GTO Controlled Series Capacitor on IDMT Directional Overcurrent Relay in the Presence Phase to Earth Fault},
	journal = {12th International Conference on Engineering of Modern Electric Systems (EMES)},
	year = {2013},
	author = {M. Zellagui and R. Benabid and A. Chaghi and M. Boudour}
}
@proceedings {2762,
	title = {Optimal Coordination of IDMT Directional Overcurrent Relays in the Presence of Series Compensation using Differential Evolution Algorithm},
	journal = {3th IEEE International Conference on Systems and Control (ICSC), (IEEE Explorer)},
	year = {2013},
	author = {R. Benabid and M. Zellagui and A. Chaghi and M. Boudour}
}
@proceedings {2760,
	title = {Effect of TCSC on IDMT Overcurrent Relay in the Presence of Single Phase to Earth Fault},
	journal = {3th IEEE International Conference on Systems and Control (ICSC),  (IEEE Explorer)},
	year = {2013},
	author = {M. Zellagui and R. Benabid and A. Chaghi and M. Boudour}
}
@proceedings {2758,
	title = {Impact of Fault Resistance on Transmission Line Compensated by Series FACTS Devices},
	journal = {International Conference on Electrical Engineering and Automatic Control (ICEEAC)},
	year = {2013},
	author = {M. Zellagui and A. Chaghi and HA. Hassan and A. Ghodbane and A. Ghorbani}
}
@proceedings {2756,
	title = {Impact of TCSR on Impedance Measured by Distance Relay in Algerian Transmission Line in Presence Phase to Earth Fault},
	journal = {2th International Conference on Electronics, Electrical and Automatic (ICEEA)},
	year = {2013},
	author = {M. Zellagui and A. Chaghi}
}
@proceedings {2754,
	title = {Optimal Coordination of IDMT Directional Overcurrent Relays in the Presence of SC using PSO Algorithm},
	journal = {5th International Conference of Electrotechnics (ICEL)},
	year = {2013},
	author = {~M. Zellagui and M. Boudour and A. Chaghi}
}
@proceedings {2752,
	title = {Considering the Series Compensation in Optimal Coordination of Directional Overcurrent Protections using PSO Technique},
	journal = {IEEE Jordan Conference on Applied Electrical Engineering and Computing Technologies (AEECT), (IEEE Explorer)},
	year = {2013},
	author = {R. Benabid and M. Zellagui and M. Boudour and A. Chaghi}
}
@proceedings {2577,
	title = {Neural Classification Method in Fault Detection and Diagnosis for Voltage Source Inverter in Variable Speed Drive with Induction Motor},
	journal = {8th International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER{\textquoteright}13},
	year = {2013},
	author = {F. Kadri and S. Drid and F. Djeffal and L. Chrifi Alaoui}
}
@proceedings {2567,
	title = {Failure Diagnostics of Safety Instrumented System:Simulation and Experimental Study},
	journal = {International Conference on Control, Decision and Information Technologies (CoDIT{\textquoteright}13)},
	year = {2013},
	author = {S. Sekiou and Z. Chiremsel and S. Drid and R. Nait-Said}
}
@proceedings {2566,
	title = {Supervisor Control for a Stand\&ndash;Alone Hybrid Generation System Using Fuel Cell and Photovoltaic Energy},
	journal = {nternational Conference on Systems, Control,Signal Processing and Informatics (SCSI 2013)},
	year = {2013},
	author = {M. Tiar and A. Betka and R. Cheikh and S. Drid}
}
@proceedings {2565,
	title = {Sliding Mode Control of a Brushless Doubly Fed Induction Generator for Wind Energy Conversion Systems},
	journal = {3 rd International Conference on Systems and Control},
	year = {2013},
	author = {MA. Mahboub and S. Drid}
}
@proceedings {2564,
	title = {Fuzzy Logic Control Algorithm of Grid Connected Doubly Fed Induction Generator Driven by Vertical Axis Wind Turbine in Variable Speed},
	journal = {3rd International Conference on Systems and Control},
	year = {2013},
	author = {R. Cheikh and H. Belmili and S. Drid and A. Menacer and M. Tiar}
}
@proceedings {2563,
	title = {Modelling and Control of a Hybrid Generation System Using Energy Storage System},
	journal = {The First International Conference on Power Electronics and their Applications},
	year = {2013},
	author = {M. Tiar and A. Betka and S. Drid and R. Cheikh}
}
@proceedings {2562,
	title = {Fuzzy logic control of stand-alone photovoltaic system using a Backstepping Control Strategy of Inverter},
	journal = {2th International Conference On Electronics, Electrical And Automatic},
	year = {2013},
	author = {M. Tiar and A. Betka and S. Drid and R. Cheikh}
}
@proceedings {2561,
	title = {Comparative Study of the control by sliding mode and the vectorial control of a brushless doubly fed induction generator},
	journal = {Fourteenth International conference on Sciences and Techniques of Automatic Control \& computer engineering, STA{\textquoteright}2013},
	year = {2013},
	author = {MA. Mahboub and S. Drid and H. Radjeai}
}
@proceedings {1944,
	title = {Speed Sensorless Flatness-Based Control of PMSM Using a Second Order Sliding Mode Observer},
	journal = {8 th International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER{\textquoteright}13},
	year = {2013},
	author = {A. Fezzani and S. Drid and A. Makouf and L. Chrifi Alaoui}
}
@proceedings {1943,
	title = {Linear Parameter Varying Induction Motor Control with Two-degree-of freedom Controller},
	journal = {IV International Conference on Power Engineering, Energy and Electrical Drives (POWERENG)},
	year = {2013},
	author = {D. Khamari and A. Makouf and S. Drid}
}
@proceedings {1942,
	title = {An improved SVM-DTC with fuzzy control based induction motor drive scheme using D-Space},
	journal = {IV International Conference on Power Engineering, Energy and Electrical Drives (POWERENG)},
	year = {2013},
	author = {S. Benaicha and F. Zidani and R. Nait-Said and MS. Nait-Said}
}
@proceedings {1941,
	title = {High performance input output linearization control with Extended kalman Filter applied to Permanent Magnet Synchronous Motor},
	journal = { International Conference on Electrical Engineering and Automatic Control; ICEEAC13},
	year = {2013},
	author = {I. Bakhti and S. Chaouch and A. Makouf and T. douadi}
}
@proceedings {1909,
	title = {Fuzzy Efficiency Enhancement of Induction Motor Drive},
	journal = {IV International Conference on Power Engineering, Energy and Electrical Drives (POWERENG)},
	year = {2013},
	author = {Z. rouabeh and F. Zidani and B. Abdelhadi}
}
@proceedings {1898,
	title = {An improved SVM-DTC with fuzzy control based induction motor drive scheme using D-Space},
	journal = {IV International Conference on Power Engineering, Energy and Electrical Drives (POWERENG)},
	year = {2013},
	author = {S. Benaicha and F. Zidani and R. Nait-Said and MS. Nait-Said}
}
@proceedings {2789,
	title = {Impact of Inserting STATCOM on MHO Distance Relay Setting in Algerian Transmission Line},
	journal = {6th International Conference Sciences of Electronics, Technologies of Information and Telecommunications (SETIT)},
	year = {2012},
	author = {M. Zellagui and A. Chaghi}
}
@proceedings {2788,
	title = {Impacts of Static Synchronous Series Compensator (SSSC) on Measured Impedance in Distance Protection},
	journal = {2nd International Conference on Information Processing and Electrical Engineering (ICIPEE)},
	year = {2012},
	author = {M. Zellagui and A. Chaghi}
}
@proceedings {2787,
	title = {A Comparative Study of Impact Series FACTS Devices on Distance Relay Setting in Algerian 400 kV Transmission Line},
	journal = {2nd International Conference on Industrial Engineering and Manufacturing (ICIEM)},
	year = {2012},
	author = {M. Zellagui and A. Chaghi}
}
@proceedings {2786,
	title = {Impact of GCSC on Measured Impedance by Distance Relay in the Presence of Single Phase to Earth Fault},
	journal = {International Conference on Power Systems Engineering (ICPSE)},
	year = {2012},
	author = {M. Zellagui and A. Chaghi}
}
@proceedings {2785,
	title = {Distance Relay Setting in Presence Static Var Compensator Devices (TCR and TSC) in Algerian Transmission Line 400 kV},
	journal = {7th International Conference on Electrical Engineering (CEE)},
	year = {2012},
	author = {M. Zellagui and A. Benabbas and A. Chaghi}
}
@proceedings {2784,
	title = {MHO Distance Relay Setting Based Artificial Neural Network in The Presence of TCSR in Algerian Transmission},
	journal = {7th International Conference on Electrical Engineering (CEE)},
	year = {2012},
	author = {M. Zellagui and A. Chaghi}
}
@proceedings {2783,
	title = {Impact of Insertion FSC and GCSC on MHO Distance Protection Setting in 400 kV Transmission Line},
	journal = {13th International Conference on Sciences and Techniques of Automatic Control and Computer (STA)},
	year = {2012},
	author = {M. Zellagui and A. Chaghi}
}
@proceedings {2639,
	title = {Second order sliding mode induction motor control with a new Lyapunov approach},
	journal = {9th~International Multi-Conference on~ Systems, Signals and Devices (SSD)},
	year = {2012},
	author = {H. Benderradji and A. Benamor and L. Chrifi Alaoui and A. Bussy and A. Makouf}
}
@proceedings {2638,
	title = {Voltage Complex Feedback Control for Wind Powered Double Fed Induction Generator},
	journal = {The 1st~international Conference on Renewable Energies and Vehicular Technology REVET{\textquoteright}12},
	year = {2012},
	author = {MS. Nait-Said and N. Nait-Said and A. Makouf}
}
@proceedings {2637,
	title = {Saturated Induction Machine Modelling Based on High Frequency Signal Injection},
	journal = {International Conference on Renewable Energies and Power ~Quality~(ICREPQ{\textquoteright}12)},
	year = {2012},
	author = {S. Damkhi and MS. Nait-Said and N. Nait-Said}
}
@proceedings {2635,
	title = {Optimisation des Gains d\&rsquo;un PI par PSO dans un Syst{\`e}me Commande-Machine},
	journal = {7th International Conference on Electrical Engineering},
	year = {2012},
	author = {S. Bazi and R. Benzid and MS. Nait-Said}
}
@proceedings {2633,
	title = {Optimal Positioning for the Faults Detection in D.C. Motor Closed Loop Controlled},
	journal = {7thInternational Conference on Electrical Engineering},
	year = {2012},
	author = {N. Barkat and MS. Nait-Said and R. Chouchane}
}
@proceedings {2631,
	title = {Commande Pr{\'e}dictive G{\'e}n{\'e}ralis{\'e}e en Cascade de la Machine Synchrone {\`a} Aimants permanents},
	journal = {7th~International Conference on Electrical Engineering},
	year = {2012},
	author = {A. Benbrahim and MS. Nait-Said and A. Makouf}
}
@proceedings {2630,
	title = {A New Modeling Approach of the Interior Permanent Magnet Synchronous Machine based on Rotating High Frequency Signal Injection},
	journal = {7th~International Conference on Electrical Engineering},
	year = {2012},
	author = {S. Damkhi and MS. Nait-Said and N. Nait-Said}
}
@proceedings {2629,
	title = {Commande non Lin{\'e}aire Robuste de la machine Synchrone {\`a} Aimant Permanent},
	journal = {7th~International Conference on Electrical Engineering},
	year = {2012},
	author = {F. Boussekra and A. Makouf}
}
@proceedings {2628,
	title = {Commandes d\&rsquo;une Machine {\`a} Induction par Acc{\'e}l{\'e}ration du Champ Electromagn{\'e}tique : Illustration par les Commandes Vectorielle et Scalaire},
	journal = {7th International Conference on Electrical Engineering},
	year = {2012},
	author = {M. Hadjam and A. Makouf and MS. Nait-Said}
}
@proceedings {2627,
	title = {Optimal Design of an Innovative Induction Machine},
	journal = {7th~International Conference on Electrical Engineering},
	year = {2012},
	author = {S. Chaouch and B. Abdelhadi and A. Benoudjit}
}
@proceedings {2599,
	title = {Self scheduled LPV flux observer for induction motor},
	journal = {International Conference on Industrial Engineering \& Manufacturing ICIEM{\textquoteright}12},
	year = {2012},
	author = {D. Khamari and A. Makouf and S. Drid}
}
@proceedings {2598,
	title = {
	A robust sliding mode torque and flux controller of induction motor drives


 

},
	journal = {International Conference on Industrial Engineering \& Manufacturing ICIEM{\textquoteright}12},
	year = {2012},
	author = {M. Behloul and MS. Nait-Said and S. Drid}
}
@proceedings {2597,
	title = {Direct Torque Control For Induction Motor Drives Using Amplitude And Angle Of The Stator Flux Control},
	journal = {4th International Conference On Electrical Engineering},
	year = {2012},
	author = {R. Saifi and N. Nait-Said and A. Makouf and S. Drid}
}
@proceedings {2587,
	title = {Sliding Mode Linearization Control via Second Order Sliding Mode Flux Observer Applied to Induction Motor-Experimental Evaluation},
	journal = {7th International Conference on Electrical Engineering},
	year = {2012},
	author = {H. Benderradji and L. Chrifi Alaoui and S. Drid and A. Makouf}
}
@proceedings {2583,
	title = {Flatness-Based Control of an PMSM Fed via Voltage Source Inverter},
	journal = {7th International Conference on Electrical Engineering},
	year = {2012},
	author = {A. Fezzani and S. Drid and A. Makouf and L. Chrifi Alaoui}
}
@proceedings {2582,
	title = {Commande par lin{\'e}arisation entr{\'e}e/sortie d\&rsquo;une machine asynchrone avec un estimateur de flux rotorique},
	journal = {7th International Conference on Electrical Engineering},
	year = {2012},
	author = {L. Sahraoui and MS. Nait-Said and S. Drid}
}
@proceedings {2581,
	title = { Implementation of RST controller for Speed Control of an Indirect Field Oriented Control \&ldquo;IFOC\&rdquo; Induction Machine Drive using Dspace 1103 Software},
	journal = {4th International Conference On Electrical Engineering},
	year = {2012},
	author = {T. Boutabba and S. Drid and H. Benbouzid}
}
@proceedings {2579,
	title = {Discrete-time Power Control of a Variable Speed Wind Turbine Driving an DFIG fed by a three levels inverter},
	journal = {7th International Conference on Electrical Engineering},
	year = {2012},
	author = {T. Boutabba and H. Benbouzid and S. Drid}
}
@proceedings {2184,
	title = {Modified Setting Distance Relay of 400 kV Transmission Line in Presence STATCOM using IEC 61850 Communication Protocol},
	journal = {1st National Conference on Telecommunications (NCT), University of Guelma},
	year = {2012},
	author = {M. Zellagui and A. Chaghi}
}
@proceedings {1955,
	title = {Voltage Complex Feedback Control for Wind Powered Double Fed Induction Generator},
	journal = {The first international Conference on Renewable Energies and Vehicular Technology REVET 2012, 26 to 28 March 2012, Hammamet Tunisia. },
	year = {2012},
	author = {MS. Nait-Said and N. Nait-Said and A. Makouf}
}
@proceedings {1954,
	title = {Mod{\'e}lisation de l\&$\#$39;hyst{\'e}r{\'e}sis dynamique des t{\^o}les soumis {\`a} des champs {\`a} fr{\'e}quences moyennes},
	journal = {7th International Conference on Electrical Engineering, 8- 10 October 2012 Batna. Alg{\'e}rie },
	year = {2012},
	author = {S. Hamada and FZ. Louai and N. Nait-Said}
}
@proceedings {1952,
	title = {Saturated Induction Machine Modelling Based on High Frequency Signal Injection},
	journal = {International Conference on Renewable Energies and Power  Quality (ICREPQ{\textquoteright}12)},
	year = {2012},
	author = {S. Damkhi and MS. Nait-Said and N. Nait-Said}
}
@proceedings {1951,
	title = {Slotting Effects and High Frequency Signal Injection for Induction machine Rotor Speed Estimation},
	journal = { International Conference and Exposition on Electrical and Power Engineering EPE 2012},
	year = {2012},
	author = {S. Damkhi and MS. Nait-Said and N. Nait-Said}
}
@proceedings {1918,
	title = {Commande Robuste de la Machine Asynchrone},
	journal = {7th International Conference on Electrical Engineering},
	year = {2012},
	author = {N. Benbaha and F. Zidani and MS. Nait-Said}
}
@proceedings {1916,
	title = {Fuzzy Adapted MPPT for Wind EnergyConverter System},
	journal = {3th International conference on Sciences and Techniques of Automatic control \& computer engineering STA{\textquoteright}2012},
	year = {2012},
	author = {Y. Belkacem and S. Drid and F. Zidani}
}
@proceedings {2834,
	title = {Application of the Meshless local PETROV-GALERKIN Method in Electromagnetics Using the Penalty Approach },
	journal = {2 {\`e}me Colloque National sur l{\textquoteright}Inductique : Application de l{\textquoteright}Induction {\'E}lectromagn{\'e}tique CNI{\textquoteright}02},
	year = {2011},
	author = {N.Benbouza and M.Feliachi, and FZ. Louai}
}
@proceedings {2640,
	title = {H\&infin; control using sliding mode linearization technique applied to an induction motor},
	journal = {Eighth International Multi-Conference on Systems, Signals \& Devices },
	year = {2011},
	author = {H. Benderradji and L. Chrifi Alaoui and A. Makouf}
}
@proceedings {2605,
	title = {Modeling and Decoupled Active and Reactive power Control of a Doubly Fed Induction Generator},
	journal = {First International Conference on communication, computing and control Applications CCCA~{\textquoteright}11},
	year = {2011},
	author = {N. MEKKAOUI and MS. Nait-Said and S. Drid}
}
@proceedings {2604,
	title = {Steady-State Analysis of Self -Excited Induction Generator},
	journal = {First International Conference on communication, computing and control Applications CCCA~{\textquoteright}11},
	year = {2011},
	author = {N. MEKKAOUI and MS. Nait-Said and S. Drid}
}
@proceedings {2603,
	title = {Control of Induction Motor using Polytopic LPV Models},
	journal = {IEEE-2011 International Conference on Communications, Computing and Control Applications (CCCA{\textquoteright}11) },
	year = {2011},
	author = {D. Khamari and A. Makouf and S. Drid}
}
@proceedings {2602,
	title = {Robust Linear Parameter Varying Flux Observer for induction motor},
	journal = {1st International Conference on Automation and Mechatronics CIAM{\textquoteright}2011},
	year = {2011},
	author = {D. Khamari and A. Makouf and S. Drid}
}
@proceedings {2601,
	title = {Robust Feedback Lyapunov Linearization Control for the PMSM},
	journal = {1st International Conference on Automation and Mechatronics CIAM{\textquoteright}2011},
	year = {2011},
	author = {A. Fezzani and S. Drid and A. Makouf}
}
@proceedings {2600,
	title = {Scalar Control Experimental Study using The Natural Pulse Width Modulation and Vector Modulation for Induction Machine},
	journal = {1st International Conference on Automation and Mechatronics CIAM{\textquoteright}2011},
	year = {2011},
	author = {D. Abdessemed and S. Drid and S. Bendib}
}
@proceedings {2670,
	title = {IMPLANTATION EXPERIMENTALE D\&rsquo;UN M.P.P.T POUR UN SYSTEME DE GENERATION EOLIENNE A AXE HORIZONTAL},
	journal = {1er S{\'e}minaire M{\'e}diterran{\'e}en sur L{\textquoteright}Energie Eolienne, SMEE{\textquoteright}2010},
	year = {2010},
	author = {S. Amezian and S. Drid and T. Boutabba}
}
@proceedings {2669,
	title = {Field-oriented control using sliding mode linearization technique for induction motor },
	journal = { 18th Mediterranean Conference in Control \& Automation (MED) 2010},
	year = {2010},
	author = {H. Benderradji and A. Makouf and L. Chrifi Alaoui}
}
@proceedings {2667,
	title = {Hybrid Nonlinear-Sliding Mode Control of Induction Motor without speed sensor},
	journal = {6th~International Conference on electrical engineering CEE{\textquoteright}10},
	year = {2010},
	author = {E. Benyoussef and S. Chaouch}
}
@proceedings {2666,
	title = {MRAS Neural Network Rotor Flux Observer for Sensorless Control of the Induction Motor Drives},
	journal = {6th International Conference on Electrical Engineering, CEE{\textquoteright}10},
	year = {2010},
	author = {S. Damkhi and N. Nait-Said and MS. Nait-Said}
}
@proceedings {2665,
	title = {Commande Pr{\'e}dictive G{\'e}n{\'e}ralis{\'e}e de la Machine Synchrone {\`a} Aimants Permanents},
	journal = {6th~International Conference on Electrical Engineering, CEE{\textquoteright}10},
	year = {2010},
	author = {A. Benbrahim and MS. Nait-Said and A. Makouf}
}
@proceedings {2664,
	title = {Sensorless Speed Control with a Sliding Mode flux Observer Design of an Induction Motor},
	journal = {6th~International Conference on Electrical Engineering, CEE{\textquoteright}10},
	year = {2010},
	author = {I. Bakhti and S. Chaouch and A. Makouf}
}
@proceedings {2663,
	title = {Commande par Lin{\'e}arisation Mode Glissant du Moteur {\`a} Induction},
	journal = { 6th~International Conference on Electrical Engineering, CEE{\textquoteright}10},
	year = {2010},
	author = {H. Benderradji and L. Chrifi Alaoui and A. Makouf}
}
@proceedings {2662,
	title = {Estimation de la vitesse d\&rsquo;une machine asynchrone lors de la commande non lineaire par mode glissant},
	journal = {First international conference on power electronics and electrical drives ICPEED{\textquoteright}10},
	year = {2010},
	author = {E. Benyoussef and S. Chaouch}
}
@proceedings {2626,
	title = {Implementation of Discrete Time Vector Control of Induction Machine drive with Software DSPace 1103},
	journal = {The 6th International Conference on Electrical Systems and Automatic Control },
	year = {2010},
	author = {T. Boutabba and S. Amezian and S. Drid and A. Makouf}
}
@proceedings {2625,
	title = {Implantation Experimentale d\&rsquo;un M.P.P.T pour un systeme de Generation {\'e}olienne {\`a} axe horizontal},
	journal = {1er S{\'e}minaire M{\'e}diterran{\'e}en sur L{\textquoteright}Energie Eolienne, SMEE{\textquoteright}2010},
	year = {2010},
	author = {S. Amezian and S. Drid and T. Boutabba}
}
@proceedings {2624,
	title = {Robust Controller Design for Speed Control of an Indirect Field Oriented Control \&ldquo;IFOC\&rdquo; Induction Machine Drive with Implementation in Software Dspace 1103},
	journal = {the International Conference On Industrial Engineering and Manufacturing ICIEM{\textquoteright}10},
	year = {2010},
	author = {T. Boutabba and S. Drid and A. Makouf}
}
@proceedings {2623,
	title = {Neural Network Direct Torque Control of Induction Motor Fed by Three Phase PWM Inverter},
	journal = { First international congress on models, optimisation and security of systems (ICMOSS2010)},
	year = {2010},
	author = {F. Kadri and D. Djarah and S. Drid}
}
@proceedings {2622,
	title = {Mod{\'e}lisation et Contr{\^o}le Indirecte des puissances d\&$\#$39;une G{\'e}n{\'e}ratrice {\`a} Induction Double Aliment{\'e}e},
	journal = {6th International Conference on Electrical Engineering, CEE{\textquoteright}10},
	year = {2010},
	author = {N. MEKKAOUI and S. Drid and MS. Nait-Said}
}
@proceedings {2621,
	title = {Implantation Exp{\'e}rimentale d\&rsquo;un MPPT Pour un Syst{\`e}me de G{\'e}n{\'e}ration Solaire Photovolta{\"\i}que},
	journal = {6th International Conference on Electrical Engineering, CEE{\textquoteright}10},
	year = {2010},
	author = {A. Sadek and S. Drid and N. Nait-Said and T. Boutabba}
}
@proceedings {2620,
	title = {Induction Motor SM-DTC Control with Adaptive Sliding Mode Observer Speed Using dSPACE 1103},
	journal = { 6th International Conference on Electrical Engineering, CEE{\textquoteright}10},
	year = {2010},
	author = {M. Behloul and MS. Nait-Said and S. Drid}
}
@proceedings {2619,
	title = {Induction Motor LMI Gain Scheduling H\&infin; Control using Linear Parameter Varying Model},
	journal = {6th International Conference on Electrical Engineering, CEE{\textquoteright}10},
	year = {2010},
	author = {D. Khamari and A. Makouf and S. Drid}
}
@proceedings {2618,
	title = {Commande Robuste par Mode Glissant d\&rsquo;Ordre Sup{\'e}rieur de la Machine Synchrone {\`a} Aimant Permanent},
	journal = {6th International Conference on Electrical Engineering, CEE{\textquoteright}10},
	year = {2010},
	author = {A. Fezzani and S. Drid and A. Makouf and L. Chrifi Alaoui}
}
@proceedings {2617,
	title = {The Doubly Fed Induction Generator Powers Flow Control in Variable Speed},
	journal = {6th International Conference on Electrical Engineering, CEE{\textquoteright}10},
	year = {2010},
	author = {R. Cheikh and S. Drid and A. Menacer}
}
@proceedings {2616,
	title = {Experimental Study of the Indirect Field Oriented Control for Induction Motor using Natural Pulse Width and Space Vector Modulation},
	journal = {6th International Conference on Electrical Engineering, CEE{\textquoteright}10, Oct},
	year = {2010},
	author = {D. Abdessemed and S. Drid and S. Bendib}
}
@proceedings {2615,
	title = {Direct Torque Control of Induction Motor Fed by Three Phase PWM Inverter Using Fuzzy logic and Neural Network},
	journal = {6th International Conference on Electrical Engineering, CEE{\textquoteright}10},
	year = {2010},
	author = {F. Kadri and S. Drid and D. Djarah and F. Djeffal}
}
@proceedings {2614,
	title = {A DSP1103-Based Space Vector Modulation \&amp; Natural Pulse Width for Speed regulation of Induction Motor using Indirect Field Oriented Control},
	journal = { International Conference on Electrical Engineering, Electronics and Automatics{\textquoteright}10},
	year = {2010},
	author = {D. Abdessemed and S. Drid and S. Bendib}
}
@proceedings {2613,
	title = {Complex Feedback Voltage Control for Wind Powered Double Fed Induction Generator},
	journal = {1st International Symposium on Environment Friendly Energies in Electrical Applications (EFEEA{\textquoteright}10)},
	year = {2010},
	author = {MS. Nait-Said and S. Drid and N. Nait-Said and A. Makouf}
}
@proceedings {2612,
	title = {Steady-State Analysis of Self -Excited Induction Generator},
	journal = {1st International Symposium on Environment Friendly Energies in Electrical Applications (EFEEA{\textquoteright}10)},
	year = {2010},
	author = {N. MEKKAOUI and MS. Nait-Said and S. Drid}
}
@proceedings {2611,
	title = {Variable speed Doubly Fed Induction Generators Power Control with Wind Turbine Maximum Power Point Tracking},
	journal = {1st International Symposium on Environment Friendly Energies in Electrical Applications (EFEEA{\textquoteright}10)},
	year = {2010},
	author = {S. Drid and A. Makouf and MS. Nait-Said}
}
@proceedings {2610,
	title = {An Adaptive Sliding Mode Observer for Speed Sensorless SM-DTC Control of Induction Motors},
	journal = {st International Symposium on Environment Friendly Energies in Electrical Applications (EFEEA{\textquoteright}10)},
	year = {2010},
	author = {M. Behloul and MS. Nait-Said and S. Drid}
}
@proceedings {2609,
	title = {Analysis Approach of Self Excited Induction Generator Operation},
	journal = {EFEEA{\textquoteright}10 International Symposium on Environment Friendly Energies in Electrical Applications},
	year = {2010},
	author = {MS. Nait-Said and S. Drid and A. Makouf}
}
@proceedings {2608,
	title = {Modeling and Control of Indirect powers of a Doubly Fed Induction Generator},
	journal = {EFEEA{\textquoteright}10 International Symposium on Environment Friendly Energies in Electrical Applications },
	year = {2010},
	author = {N. MEKKAOUI and S. Drid and MS. Nait-Said}
}
@proceedings {1922,
	title = {On-Line Losses Minimization of Induction Motor Vector Control using Real Coded Genetic Algorithms},
	journal = {6th International Conference on Electrical Engineering },
	year = {2010},
	author = {Z. rouabeh and B. Abdelhadi and F. Anayi and F. Zidani}
}
