@proceedings {3099,
	title = {Modified Robust Model Reference Adaptive System Scheme for a Speed Sensorless Vector Control of Induction Motor},
	journal = {19th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA)},
	year = {2019},
	pages = {473-478},
	abstract = {This paper presents a robust rotor speed sensorless control strategy for induction motor. The main purpose is to overcome the instability issue for zero/low speed operating mode while considering that the rotor resistance is subject to uncertainties or variations. A Modified Model Reference Adaptive System speed estimation scheme is presented, and its sensitivity to stator resistance mismatches is investigated. The proposed approach introduces a discrete reference and adjustable models of the motor. Moreover, an adaptive discrete speed estimation scheme is synthesized on the basis of the extended Kalman filter technique. The proposed sensorless control scheme is tested using the professional Hardware simulator AMEsim (LMS). The obtained results confirm the superiority and ability of the proposed method compared to the classic Model Reference Adaptive System speed estimation scheme to guarantee a\&nbsp;{\textellipsis}},
	author = {M. Bahloul and AN. Vargas and L. Chrifi Alaoui and S. Drid and M. Chaabane}
}
@article {2035,
	title = {Robust nonlinear control via feedback linearization and Lyapunov theory for permanent magnet synchronous generator- based wind energy conversion system},
	journal = {Frontiers in Energy},
	year = {2018},
	abstract = {In this paper, the method for the nonlinear control design of a permanent magnet synchronous generator based-wind energy conversion system (WECS) is proposed in order to obtain robustness against disturbances and harvest a maximum power from a typical stochastic wind environment. The technique overcomes both the problem of nonlinearity and the uncertainty of the parameter compared to such classical control designs based on traditional control techniques. The method is based on the differential geometric feedback linearization technique (DGT) and the Lyapunov theory. The results obtained show the effectiveness and performance of the proposed approach.},
	author = {R. Cheikh and A. Menacer and L. Chrifi Alaoui and S. Drid}
}
@proceedings {1976,
	title = {An advanced energy management system with an economical optimization for a multi-sources stand-alone Home},
	journal = {7th International Conference on Systems and Control (ICSC), Valencia, Spain},
	year = {2018},
	pages = {154-159},
	address = {IEEE},
	abstract = {This paper proposes an advanced energy management system (EMS) for a stand-alone hybrid energy system. The considered hybrid system includes a photovoltaic panel, a fuel cell, an electrolyzer and a battery bank. The EMS aims to optimize the utilization cost of the hybrid power system and to improve its energy balance with the elimination of any energy deficit.The hybrid power system has been tested by simulation using models implemented in Matlab/Simulink software. The simulation is performed over a long period of time in order to evaluate the effectiveness of the management strategy. The simulation results confirm the efficiency of the proposed control strategy, as it increases the reliability of the system and improves its energy balance.},
	author = {T. Alnejaili and L. Chrifi Alaoui and D. Mehdi and A. Alibi and S. Drid}
}
@proceedings {1975,
	title = {Control and optimal management of a multi-source energy system},
	journal = {7th International Conference on Systems and Control (ICSC), Valencia, Spain},
	year = {2018},
	pages = {164-168},
	address = {IEEE},
	abstract = {The main aim of this work is to develop an energy management algorithm (EMS) that control renewable energy system that consists of PV panels, lead acid battery banks and supercapacitor. On addition to that a Graphical user interfaces is developed to control the power system. The efficiency of the controller was tested by the mean of simulation, the result assume the effectiveness of the proposed control method and the intelligent management of the power flow controller.},
	author = {T. Alnejaili and A. Alibi and L. Chrifi Alaoui and D. Mehdi and H. Sahraoui and S. Drid}
}
@proceedings {1974,
	title = {dSPACE Real-Time Implementation Sliding Mode Maximum Power Point Tracker for Photovoltaic system},
	journal = {7th International Conference on Systems and Control (ICSC), Valencia, Spain},
	year = {2018},
	pages = {137-141},
	address = {IEEE},
	abstract = {Maximum power point trackers are so important in photovoltaic systems to improve their overall efficiency. This paper presents a photovoltaic system with maximum power point tracking facility. An intelligent Sliding mode controller method is proposed in this paper to achieve the maximum power point tracking of PV modules. The system consists of a photovoltaic solar module connected to a DC-DC boost converter. The system is modeled using MATLAB/SIMULINK. The system has been experienced under disturbance in the photovoltaic loads and irradiation levels. The simulation results show that the proposed maximum power tracker tracks the maximum power accurately and successfully in all tested conditions. The MPPT system is then experimentally implemented. DSPACE is used in the implementation of the MPPT hardware setup for real-time control. Data acquisition and system control are implemented using dSPACE 1104 software and digital signal processor card. The experimental results show the efficiency of the proposed algorithm and confirm the simulation results.},
	author = {T. Boutabba and A. Alibi and L. Chrifi Alaoui and M. Ouriagli and S. Drid and D. Mehdi and MEH. Benbouzid}
}
@proceedings {1973,
	title = {The dynamic control and optimal management of the energy in the case of a territory isolated in Batna city},
	journal = {7th International Conference on Systems and Control (ICSC), Valencia, Spain},
	year = {2018},
	pages = {160-163},
	address = {IEEE},
	abstract = {This paper deals with the optimal sizing and management of power system for medium rural health clinic located in the Batna region (Algeria). The study evaluates different power configurations depending on economic, environmental and technical characteristics. The main objective is to cover the entire loads with an uninterruptible, high quality power supplies with lowest cost of energy and high renewable energy penetration.},
	author = {H. Sahraoui and L. Chrifi Alaoui and M. Ouriagli and S. Drid and D. Mehdi and P. Bussy and T. Alnejaili}
}
@proceedings {1972,
	title = {Experimental control of a Doubly Fed Induction Generator based Wind Energy Conversion System},
	journal = {2018 7th International Conference on Systems and Control (ICSC), Valencia, Spain},
	year = {2018},
	pages = {142-147},
	address = {IEEE},
	abstract = {In recent years, electrical energy has become a vital component for human life. Moreover, the interest for alternative energy sources has an exponential rise nowadays as a consequence of the limitation in conventional energy sources. Wind energy is considered one of the most important renewable energy sources. Nowadays, in order to ensure an optimal energy use, management and control technologies of wind energy conversion system are developed rapidly. In this paper, both of the vector controller and sliding mode control strategy for an isolated doubly fed induction generator-based wind energy conversion system are studied, described, tested and compared. In order to ensure the safety of the connected load, the main purpose of the present work is to maintain output stator voltage and frequency at their reference values whether for load demand power variations and wind speed fluctuations. Experimental results demonstrate the effectiveness of the presented control strategies.},
	author = {N. Bouchiba and S. Keskes and S. Sallem and L. Chrifi Alaoui and S. Drid and MBA. Kammoun}
}
@article {1544,
	title = {A New Implementation of Maximum Power Point Tracking based on Fuzzy Logic Algorithm for Solar Photovoltaic System},
	journal = {International Journal of Engineering, Transactions A},
	volume = {31},
	number = {4},
	year = {2018},
	pages = {184-191},
	author = {T. Boutabba and S. Drid and L. Chrifi Alaoui and M. Benbouzid}
}
@article {1541,
	title = {Online robust estimation of flux and load torque in induction motors},
	journal = {The International Journal of Advanced Manufacturing Technology },
	volume = {94 },
	number = {5-8},
	year = {2018},
	pages = {2703{\textendash}2713},
	author = {M. Bahloul and L. Chrifi Alaoui and AN. Vargas and M. Chaabane and S. Drid}
}
@article {1540,
	title = {Robust Sensorless Vector Control of an Induction Machine Using Multiobjective Adaptive Fuzzy Luenberger Observer},
	journal = {ISA Transactions},
	volume = {74},
	year = {2018},
	pages = {74, 144-154},
	author = {M. Bahloul and L. Chrifi Alaoui and S. Drid and M. Souissi and M Chabaane}
}
@proceedings {1979,
	title = {Management, optimization and conversion of energy for self-governing house},
	journal = {2017 International Conference on Control, Automation and Diagnosis (ICCAD),Hammamet, Tunisia},
	year = {2017},
	pages = {429-433},
	address = {IEEE},
	abstract = {The problematic is to study the management of a hybrid energy system, depending on demand, dedicated to self-governing houses. Energy can be supplied by a photovoltaic panel, a wind turbine and a diesel generator and it can be stored in batteries. The study of this type of systems requires a good control strategy and an effective management. The main objective of this study is to develop a reliable management model and to simulate the hybrid system of a house located in Monastir-Tunisia, with different domestic loads, such as a washing machine, freezer, refrigerator... A system of energy management that can adjust, optimize and adapt the consumption to the available energy resources while satisfying the request is then examined. Thus, to study the problem of energy management and reduce energy consumption and production of greenhouse gases, the definition off an analysis tool on MATLAB/SIMULINK has allowed the covering of load demand in an optimized manner using the optimal system chosen by HOMER.},
	author = {M. Hamdi and L. Chrifi Alaoui and S. Drid and N. Bouguila}
}
@proceedings {1978,
	title = {A real-time Backstepping control strategy for a doubly fed induction generator based wind energy conversion system},
	journal = {2017 6th International Conference on Systems and Control (ICSC), Batna, Algeria},
	year = {2017},
	pages = {549-554},
	address = {IEEE},
	author = {N. Bouchiba and A. Barika and L. Chrifi Alaoui and S. Drid and S. Sallem and MBA. Kammoun}
}
@article {1545,
	title = {Real-time integration of control strategies for an isolated DFIG-based WECS},
	journal = {The European Physical Journal Plus },
	volume = {132},
	number = {8},
	year = {2017},
	pages = {334},
	author = {N. Bouchiba and A. Barika and L. Chrifi Alaoui and S. Drid and S. Sallem and MBA. Kammoun}
}
@article {1543,
	title = {Implementation and comparative study of control strategies for an isolated DFIG based WECS},
	volume = {132},
	number = {10},
	year = {2017},
	pages = {415},
	abstract = {Nowadays, a global interest for renewable energy sources has been growing intensely. In particular, a wind energy has become the most popular. In case of autonomous systems, wind energy conversion system (WECS) based on a double fed induction generator (DFIG) is widely used. In this paper, in order to control the stand-alone system outputs under wind speed and load variations, three kinds of nonlinear control strategies have been proposed, applied and compared, such as: Classical PI controller, Back-Stepping and Sliding Mode controllers. A series of experiments have been conducted to evaluate and to compare the developed controllers{\textquoteright} dynamic performances under load demand and speed variations. The design and the implementation of different control strategies to a 1.5kW doubly fed induction machine is carried out using a dSpace DS1104 card based on MATLAB/Simulink environment\&nbsp;{\textellipsis}},
	author = {N. Bouchiba and A. Barkia and L. Chrifi Alaoui and S. Drid and MBA. Kammoun}
}
@proceedings {2214,
	title = {A comparative study of PI and Sliding mode controllers for autonomous wind energy conversion system based on DFIG},
	journal = {17th International conference on Sciences and Techniques of Automatic control \& computer engineering , STA{\textquoteright}2016},
	year = {2016},
	author = {A. Barkia and N. Bouchiba and S. Sallem and L. Chrifi Alaoui and S. Drid and MBA. Kammoun}
}
@proceedings {2213,
	title = {Analysis and Design of rotor MRAS Speed Sensorless with a Novel Approach},
	journal = {the 17th International conference~ on Sciences and Techniques of Automatic control \& computer engineering, STA{\textquoteright}2016},
	year = {2016},
	author = {I. Benlaloui and S. Drid and L. Chrifi Alaoui and B. Marhic and M. Ouriagli}
}
@proceedings {2212,
	title = {Flux Observers Design for Induction Motor using Linear Parameter Varying Observer and Sliding Mode Observer},
	journal = {the 17th International conference on Sciences and Techniques of Automatic control \& computer engineering, STA{\textquoteright}2016},
	year = {2016},
	author = {I. Benlaloui and D. Khamari and S. Drid and L. Chrifi Alaoui and M. Hamzaoui}
}
@proceedings {2211,
	title = {Nonlinear Control of the Doubly Fed Induction Generator used with Wind Turbine for an Isolated Grid},
	journal = {17th International conference on Sciences and Techniques of Automatic control \& computer engineering , STA{\textquoteright}2016},
	year = {2016},
	author = {Y. Belkacem and S. Drid and A. Makouf and S. Bouslimani and L. Chrifi Alaoui and B. Marhic}
}
@proceedings {2210,
	title = {Samir BOUSLIMANI, Said DRID and L. CHRIFI ALAOUI, Pascal Bussy and Mohamed \&ldquo;Inter-Turn Faults Detection using Park Vector Strategy},
	journal = {the 17th International conference on Sciences and Techniques of Automatic control \& computer engineering,STA{\textquoteright}2016},
	year = {2016},
	author = {S. Bouslimani and S. Drid and L. Chrifi Alaoui and P. Bussy and M. Hamzaoui}
}
@article {2209,
	title = {dSPACE Real-Time Implementation of Maximum Power Point Tracking Based on Ripple Correlation Control (RCC) Structure for Photovoltaic System},
	journal = {5th International Conference on Systems and Control, Cadi Ayyad University},
	year = {2016},
	author = {T. Boutabba and S. Drid and L. Chrifi Alaoui and M. Ouriagli and MEH. Benbouzid}
}
@article {2203,
	title = {Fuzzy speed estimation in case of sensorless induction machine vector control },
	journal = {Turkish Journal of Electrical Engineering \& Computer Sciences},
	volume = {24},
	year = {2016},
	pages = {3961{\textendash}3975},
	author = {M. Bahloul and M. Souissi and L. Chrifi Alaoui and S. Drid}
}
@article {2202,
	title = {Robust Nonlinear Control of a Mobile Robot},
	journal = {Journal of Electrical Engineering \& Technology },
	volume = {11, No.4},
	year = {2016},
	author = {G. Zidani and S. Drid and L. Chrifi Alaoui and D. Arar and P. Bussy}
}
@article {2201,
	title = {Second Order Sliding Mode Control of DC-DC converter used in the Photovoltaic System according an Adaptive MPPT},
	journal = {Journal of Renewable Energy Research},
	volume = {6, No.2},
	year = {2016},
	author = {H. Sahraoui and L. Chrifi Alaoui and S. Drid and P. Bussy}
}
@article {2200,
	title = {A Developed energy management strategy for a stand-alone hybrid power system for medium rural health building},
	journal = {the International Transactions on Electrical Energy Systems},
	volume = {26, N{\textdegree}. 4},
	year = {2016},
	pages = {713{\textendash}729},
	author = {T. Alnejaili and S. Drid and D. Mehdi and L. Chrifi Alaoui}
}
@article {2104,
	title = {Modified speed sensorless indirect field-oriented of induction motor drive},
	journal = {International Journal of Modelling, Identification and Control journal},
	volume = {21 No. 4},
	year = {2016},
	pages = {370-377},
	author = {Y. Beddiaf and F. Zidani and L. Chrifi Alaoui and S. Drid}
}
@proceedings {2028,
	title = {A new flux rotor based MRAS for sensorless control of induction motor},
	journal = {5th International Conference on Systems and Control (ICSC), Marrakesh, Morocco},
	year = {2016},
	pages = {365-370},
	address = {IEEE},
	abstract = {A model reference adaptive system (MRAS) based speed estimator for sensorless induction motor (IM) drive is proposed in this paper. The MRAS is formed with flux rotor and the estimated stator current vector. The reference model utilizes measured current vector. On the other hand, the adjustable model uses the estimated stator current vector. The current is estimated through the solution of machine state equations. The performance of the estimator under regeneration is an important aspect, which is studied in this paper through the small signal analysis. In this paper, the principle and method of speed estimation and control set-up are described, as well as the results of an experiment that verified the effectiveness of the proposed method.},
	author = {R. Saifi and N. Nait-Said and A. Makouf and L. Chrifi Alaoui and S. Drid}
}
@article {1531,
	title = {Optimized Torque Control via Backstepping Using Genetic Algorithm of Induction Motor},
	journal = {Automatika {\textendash} Journal for Control,~Measurement, Electronics, Computing and Communications },
	volume = {57},
	number = {2},
	year = {2016},
	pages = {579{\textendash}592},
	author = {S. Chaouch and L. Abdou and L. Chrifi Alaoui and S. Drid}
}
@proceedings {2492,
	title = {Advanced Supervisor Control for A Stand- Alone Photovoltaic Super Capacitor Battery Hybrid Energy system for Remote Building},
	journal = {The 4 th  International Conference on Systems and Control},
	year = {2015},
	author = {T. Alnejaili and M. Driss and S. Drid and L. Chrifi Alaoui}
}
@proceedings {2490,
	title = {Modeling and Analysis of the Photovoltaic array Faults},
	journal = {3rd International Conference on Control, Engineering \& Information Technology CEIT{\textquoteright}2015},
	year = {2015},
	author = {A. Fezzani and I. Hadj Mahammed and S. Drid and L. Chrifi Alaoui}
}
@proceedings {2489,
	title = {Voltage control of DC-DC Buck Converter using Second Order Sliding Mode Control},
	journal = {3rd International Conference on Control, Engineering \& Information Technology CEIT{\textquoteright}2015},
	year = {2015},
	author = {H. Sahraoui and S. Drid and L. Chrifi Alaoui and M. Hamzaoui}
}
@proceedings {2488,
	title = {Sliding Mode Control Of A Multi-Source Renewable Power System},
	journal = {3rd International Conference on Control, Engineering \& Information Technology CEIT{\textquoteright}2015},
	year = {2015},
	author = {T. Alnejaili and S. Drid and M. Driss and L. Chrifi Alaoui and H. Sahraoui}
}
@proceedings {2487,
	title = {Experimental evaluation of induction motor robust control using sliding mode linearization technique},
	journal = {the 3rd International Conference on Control, Engineering \& Information Technology (CEIT{\textquoteright}2015)},
	year = {2015},
	author = {H. Benderradji and L. Chrifi Alaoui and S. Drid and A. Makouf}
}
@proceedings {2486,
	title = {Robust Flux and Load Torque Estimation in Induction Machine},
	journal = {14 th International European Control Conference},
	year = {2015},
	author = {M. Bahloul and L. Chrifi Alaoui and M. Souissi and M. Chaabane and S. Drid}
}
@article {2478,
	title = {TS Fuzzy Logic-Based Rotor Resistance Tuning in case of Induction Machine Vector Control},
	journal = {Automatika-Journal for Control, Measurement, Electronics, Computing and Communications},
	volume = {56, N{\textdegree}.4},
	year = {2015},
	pages = {454{\textendash}465},
	author = {M. Bahloul and M. Souissi and M. Chaabane and L. Chrifi Alaoui and S. Drid}
}
@article {2477,
	title = {Fuzzy speed estimation in case of sensorless induction machine vector control },
	journal = {Turkish Journal of Electrical Engineering \& Computer Sciences},
	year = {2015},
	author = {M. Bahloul and M. Souissi and M. Chaabane and L. Chrifi Alaoui and S. Drid}
}
@article {2476,
	title = {Effective Fuzzy Logic Control of a Stand-alone Photovoltaic Pumping System},
	journal = { the Journal of Renewable Energy Research},
	volume = {5, No.3},
	year = {2015},
	abstract = {
	This paper presents an effective control of a stand-alone batteryless photovoltaic (PV) pumping system. The whole design (configuration and control) is oriented in order to minimize the cost and maximize the effectiveness, the efficiency and the reliability of the whole system. Beyond the withdrawal of the battery and the rotor speed sensor, the system is composed only of a DC-DC boost converter, a DC-AC inverter, an Induction Motor (IM) and a centrifugal pump. In order to control the dc-link voltage and maximize the efficiency of the IM, a Fuzzy Logic Controller (FLC) is introduced. The validity and the effectiveness of the proposed FLC is tested and confirmed by a simulation under various climate changes.

},
	author = {M. Bahloul and L. Chrifi Alaoui and M. Souissi and M. Chaabane and S. Drid}
}
@article {2475,
	title = {Dynamic control and advanced load management of a stand-alone hybrid renewable power system for remote housing},
	journal = {Energy Conversion and Management, Elsiver},
	volume = {105},
	number = {15},
	year = {2015},
	author = {T. Alnejaili and S. Drid and M. Driss and L. Chrifi Alaoui and R. Belarbi and A. Hamdouni}
}
@article {2470,
	title = {A developed energy management strategy for a stand-alone hybrid power system for medium rural health building},
	journal = { International Transactions On Electrical Energy~ Systems Int. Trans. Electr. Energ. Syst. (2015)},
	volume = {26(4)},
	year = {2015},
	abstract = {This paper deals with load side management strategy for (photovoltaic{\textendash}wind{\textendash}diesel) hybrid system for medium rural health building located in the Sahara region. The paper presents an overview about geographic and climate data of the location and develops a typical load profile of electrical energy, depending on a real investigation of daily electricity consumption. The base of the proposed management strategy is the control of the air conditioning system and the non-critical lighting of the building as they consume more than 50\% of the total power consumption. The result shows that the reduction in the peak consumption is about 20\% using the proposed management strategy, which has significant economical, technical, and environmental benefits},
	url = { https://doi.org/10.1002/etep.2103},
	author = {T. Alnejaili and S. Drid and M. Driss and L. Chrifi Alaoui}
}
@article {2463,
	title = {Implementation of a New MRAS Speed Sensorless Vector Control of Induction Machine},
	journal = {IEEE Transactions On Energy Conversion},
	volume = {30 No. 2},
	number = {No. 2},
	year = {2015},
	pages = {588-595},
	author = {I. Benlaloui and S. Drid and L. Chrifi Alaoui and M. Ouriagli}
}
@article {2110,
	title = {dSPACE implementation of a propulsion system using dual-induction \Real-Virtual motors},
	journal = {Turkish Journal of Electrical Engineering \& Computer Sciences},
	year = {2015},
	author = {D. Benoudjit and S. Drid and N. Nait-Said and MS. Nait-Said and L. Chrifi Alaoui}
}
@article {2105,
	title = {Novel Speed Sensorless Indirect Field-Oriented Control Of Induction Motor Using Pll And Ekf,  },
	journal = {Journal Of Electrical Engineering},
	volume = {15 },
	year = {2015},
	author = {Y. Beddiaf and F. Zidani and L. Chrifi Alaoui and S. Drid}
}
@proceedings {1934,
	title = {Backstepping Controller for a Wheeled Mobile Robot},
	journal = {the 4 International Conference on Systems and Control},
	year = {2015},
	author = {G. Zidani and S. Drid and L. Chrifi Alaoui and A. Benmakhlouf and S. Chaouch}
}
@proceedings {2543,
	title = {Robust Control of the Photovoltaic System with Improved Maximum Power Point Tracking},
	journal = {Ninth International Conference on Ecological Vehicles and Renewable Energies~EVER{\textquoteright}2014},
	year = {2014},
	author = {S. Drid and L. Chrifi Alaoui and M. Ouriagli and P. Bussy}
}
@proceedings {2542,
	title = {Neural Direct Torque Control for Induction Motor under Voltage Source Inverter Open Switch Fault},
	journal = {Ninth International Conference on Ecological Vehicles and Renewable Energies EVER{\textquoteright}2014},
	year = {2014},
	author = {F. Kadri and D. Djarah and S. Drid and F. Djeffal and L. Chrifi Alaoui}
}
@proceedings {2540,
	title = {Modeling and control of the DC-DC converters},
	journal = {International Conference on Industrial Engineering \& Manufacturing ICIEM{\textquoteright}14},
	year = {2014},
	author = {H. Sahraoui and S. Drid and L. Chrifi Alaoui and I. Benlaloui}
}
@proceedings {2537,
	title = {Second Order Sliding Mode Controller of the DC-DC Buck Converter used in Photovoltaic Systems},
	journal = {Conference on Electrical Engineering and Control Applications ICEECA{\textquoteright}2014},
	year = {2014},
	author = {H. Sahraoui and S. Drid and L. Chrifi Alaoui}
}
@proceedings {2531,
	title = {Robust Control of the Boost Converter applied in Photovoltaic Systems using Second Order Sliding Mode},
	journal = {15th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {H. Sahraoui and S. Drid and L. Chrifi Alaoui and M. Ouriagli and P. Bussy}
}
@proceedings {2497,
	title = {Advanced Strategy of Demand-Side Management for Photovoltaic-Wind Energy System},
	journal = {15th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {T. Alnejaili and S. Drid and D. Mehdi and L. Chrifi Alaoui}
}
@proceedings {2495,
	title = {Nonlinear Tracking Control of a Wheeled Mobile Robot},
	journal = {15th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {G. Zidani and S. Drid and L. Chrifi Alaoui and D. Arar and P. Bussy}
}
@proceedings {2494,
	title = {An Extended Park\&rsquo;s Vector Approach to Detect Broken Bars Faults in Induction Motor},
	journal = {15th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {S. Bouslimani and S. Drid and L. Chrifi Alaoui and P. Bussy and M. Ouriagli and L. delahoche}
}
@article {2112,
	title = {Speed Sensoless Robust Control of Permanent Magnet Synchronous Motor Based on Second-Order Sliding-Mode Observer},
	journal = {Serbian Journal of Electrical Engineering},
	volume = {11, No.3},
	year = {2014},
	pages = {419-433},
	author = {A. Fezzani and S. Drid and A. Makouf and L. Chrifi Alaoui and M. Ouriagli}
}
@proceedings {1940,
	title = {Sensorless Speed Backstepping Control of Induction Motor Based on Sliding Mode Observer:Experimental Results},
	journal = {15th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {I. Benlaloui and S. Drid and L. Chrifi Alaoui and D. Benoudjit}
}
@proceedings {1939,
	title = {Robust Control of Permanent Magnet Synchronous Motor},
	journal = {15th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {A. Fezzani and S. Drid and A. Makouf and L. Chrifi Alaoui and M. Ouriagli and L. delahoche}
}
@proceedings {1938,
	title = {A Comparative Study of Rotor Flux Estimation in Induction Motor with a Linear Parameter Varying Observer and Kalman Filter},
	journal = {5th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {I. Benlaloui and S. Drid and L. Chrifi Alaoui and D. Benoudjit and D. Khamari and M. Ouriagli}
}
@proceedings {1896,
	title = {Modified speed sensorless indirect field-oriented control of induction motor using PLL},
	journal = {5th international conference on Sciences and Techniques of Automatic control \& computer engineering - STA{\textquoteright}2014},
	year = {2014},
	author = {Y. Beddiaf and L. Chrifi Alaoui and F. Zidani and S. Drid}
}
@proceedings {2577,
	title = {Neural Classification Method in Fault Detection and Diagnosis for Voltage Source Inverter in Variable Speed Drive with Induction Motor},
	journal = {8th International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER{\textquoteright}13},
	year = {2013},
	author = {F. Kadri and S. Drid and F. Djeffal and L. Chrifi Alaoui}
}
@article {2482,
	title = {Robust Power Control of the Small Doubly\&shy;\&shy; Fed Induction Wind turbine Generator with Improved Maximum Power Point Tracking},
	journal = {International Journal On Advanced Electrical Engineering},
	volume = {1},
	number = {1},
	year = {2013},
	author = {S. Drid and L. Chrifi Alaoui and MEH. Benbouzid}
}
@article {2116,
	title = {dSPACE implementation of a propulsion system using dual-induction \&$\#$39;Real-Virtual\&$\#$39; motors},
	journal = {Turkish Journal of Electrical Engineering \& Computer Sciences},
	volume = {21},
	year = {2013},
	author = {D. Benoudjit and S. Drid and N. Nait-Said and MS. Nait-Said and L. Chrifi Alaoui}
}
@article {2115,
	title = {Robust Linear Parameter Varying Induction Motor Control with Polytopic Models},
	journal = {Serbian Journal of Electrical Engineering},
	volume = {10, No.2},
	year = {2013},
	pages = {335-348},
	author = {D. Khamari and A. Makouf and S. Drid and L. Chrifi Alaoui}
}
@article {2114,
	title = {High Performance of Self Scheduled Linear Parameter Varying Control with Flux Observer of Induction Motor},
	journal = {JEET Journal of Electrical Engineering \& Technology },
	volume = {8 N{\textdegree} 5},
	year = {2013},
	pages = {1202-1211},
	author = {D. Khamari and A. Makouf and S. Drid and L. Chrifi Alaoui}
}
@proceedings {1944,
	title = {Speed Sensorless Flatness-Based Control of PMSM Using a Second Order Sliding Mode Observer},
	journal = {8 th International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER{\textquoteright}13},
	year = {2013},
	author = {A. Fezzani and S. Drid and A. Makouf and L. Chrifi Alaoui}
}
@proceedings {2639,
	title = {Second order sliding mode induction motor control with a new Lyapunov approach},
	journal = {9th~International Multi-Conference on~ Systems, Signals and Devices (SSD)},
	year = {2012},
	author = {H. Benderradji and A. Benamor and L. Chrifi Alaoui and A. Bussy and A. Makouf}
}
@proceedings {2587,
	title = {Sliding Mode Linearization Control via Second Order Sliding Mode Flux Observer Applied to Induction Motor-Experimental Evaluation},
	journal = {7th International Conference on Electrical Engineering},
	year = {2012},
	author = {H. Benderradji and L. Chrifi Alaoui and S. Drid and A. Makouf}
}
@proceedings {2583,
	title = {Flatness-Based Control of an PMSM Fed via Voltage Source Inverter},
	journal = {7th International Conference on Electrical Engineering},
	year = {2012},
	author = {A. Fezzani and S. Drid and A. Makouf and L. Chrifi Alaoui}
}
@proceedings {2640,
	title = {H\&infin; control using sliding mode linearization technique applied to an induction motor},
	journal = {Eighth International Multi-Conference on Systems, Signals \& Devices },
	year = {2011},
	author = {H. Benderradji and L. Chrifi Alaoui and A. Makouf}
}
@article {2117,
	title = {Robust Control of Induction Motor with H\&infin; Theory based on Loopshaping},
	journal = {Journal of Electrical Engineering \& Technology},
	volume = {6 No.2},
	year = {2011},
	author = {H. Benderradji and L. Chrifi Alaoui and S. Mahieddine-Mahmoud and A. Makouf}
}
@proceedings {2669,
	title = {Field-oriented control using sliding mode linearization technique for induction motor },
	journal = { 18th Mediterranean Conference in Control \& Automation (MED) 2010},
	year = {2010},
	author = {H. Benderradji and A. Makouf and L. Chrifi Alaoui}
}
@proceedings {2663,
	title = {Commande par Lin{\'e}arisation Mode Glissant du Moteur {\`a} Induction},
	journal = { 6th~International Conference on Electrical Engineering, CEE{\textquoteright}10},
	year = {2010},
	author = {H. Benderradji and L. Chrifi Alaoui and A. Makouf}
}
@proceedings {2618,
	title = {Commande Robuste par Mode Glissant d\&rsquo;Ordre Sup{\'e}rieur de la Machine Synchrone {\`a} Aimant Permanent},
	journal = {6th International Conference on Electrical Engineering, CEE{\textquoteright}10},
	year = {2010},
	author = {A. Fezzani and S. Drid and A. Makouf and L. Chrifi Alaoui}
}
@article {2129,
	title = {Robust Control of Induction Motor Using H\&infin; Method},
	journal = {ACTA ELECTROTEHNICA},
	volume = {51, N 1},
	year = {2010},
	author = {H. Benderradji and L. Chrifi Alaoui and Sofiane M. Mahmoud and S. Chaouch}
}
