2018
[1] M.Bouakoura , N. Nait-Said , MS. Nait-Said , A.Belbach, "Novel Speed and Current Sensor FDI Schemes with an Improved AFTC for Induction Motor Drives". Advances in Electrical and Electronic Engineering 2018;16:1–14. doi:10.15598/aeee.v16i1.2573.
2017
[2] N. Benbaha, F. Zidani, M. S. Nait Said, S. Boukebbous and H. Ammar “Robust Backstepping MPPT for Photovoltaic System” International Journal of Control Theory and Applications, 9 (38), pp 179-188, 2016.Date de publication : le10/01/2017, le journal IJCTA indexé dans SCOPUS.
[3] M. Bouakoura , N. Nait-Said , M-S NAIT-SAID, "Speed Sensor Faults Diagnosis in an Induction Motor Vector Controlled Drive", Acta Electrotechnica et Informatica 2017;17:49–51. doi:10.15546/aeei-2017-0007.
2016
[1] N. Benbaha, F. Zidani, M. S. Nait Said, ''Robust Backstepping MPPT for Photovoltaic System'', to appear in International Journal of Chem Tech Research, :IJCRGG, ISSN:0974-4290, 2016.
[2] S. Chaouch, L. Abdou, L. Chrifi Alaoui and S. Drid, “Optimized Torque Control via Backstepping Using Genetic Algorithm of Induction Motor”; Automatika – Journal for Control, Measurement, Electronics, Computing and Communications, Vol 57, N 2, pp.579–592. 2016.
[3] T. Roubache, S. Chaouch and M.S. Nait Said, “Backstepping design for fault detection and FTC of an induction motor drives-based EVs”;Automatika – Journal for Control, Measurement, Electronics, Computing and Communications, Vol 57 N 3, pp.736–748. 2016.
[4] T. Roubache, S. Chaouch andM.S. Nait Said, “Sensorless Fault-Tolerant Control of an Induction Motor Based Electric Vehicle”, Journal of Electrical Engineering & Technology JEET, JEET, vol. 11, no. 5, pp.1423-1432 , 2016.
[9] D. Benoudjit, M.-S. Nait-Said, S. Drid, N. Nait-Said, On-Line Efficiency Improvement of Induction Motor Vector Controlled, Advances in Electrical and Electronic Engineering journal, DOI:10.15598/aeee.v14i3.1682,V14, N° 3, September 2016.
2015
[1] D. Benoudjit, S. Drid, N. Nait-Said, M-S. Nait-Said, L. Chrifi-Alaoui,"dSPACE implementation of a propulsion system using dual-induction \Real-Virtual" motors", Turkish Journal of Electrical Engineering & Computer Sciences. 2015, doi:10.3906/elk-1209-20
2014
[1] A. Dahbi, M. Hachemi, N. Nait-Said, M-S. Nait-Said, " Control and Realization of wind emulator and the Effect of the Parameter Variations on the Efficiency of the Wind Turbine", Archives Des Sciences, Vol. 66, N°6, Jun 2013, pp. 31-44.
[2] Ch. Mehemmal, F. Zidani, S. Benaicha, M.S. Nait-Said, “ Research on Improvement of FOC System for Induction Motor using Fuzzy Logic “, International Journal of Modelling, Identification and Control journal, Inderscience Publishers, pp. 370-377, Vol. 21 No. 4; 2014
[3] A. Fezzani, S. Drid, A. Makouf, L. Chrifi-alaoui and M. Ouriagli, "Speed Sensoless Robust Control of Permanent Magnet Synchronous Motor Based on Second-Order Sliding-Mode Observer" , Serbian Journal of Electrical Engineering, Vol.11, No.3, 2014, pp. 419-433.
[4] A. Fezzani, S. Drid, A. Makouf, " the permanent magnet synchronous motor robust nonlinear feedback control based on lyapunov method -experimental evaluation- " Journal of Electrical Engineering, JEE. Vol.14, N°3, 2014, pp28-33, Romania.
2013
[1] D. Khamari, A. Makouf, S. DRID, L. Chrifi-Alaoui ;''High Performance of Self Scheduled Linear Parameter Varying Control with Flux Observer of Induction Motor’’ JEET Journal of Electrical Engineering & Technology , Volume 8 Number 5, page 1202-1211, September 2013.
[2] D. Khamari, A. Makouf, S. Drid and L. Chrifi-Alaoui, "Robust Linear Parameter Varying Induction Motor Control with Polytopic Models ", Serbian Journal of Electrical Engineering, Vol.10, No.2, pp.335-348, 2013.
[3] D. Benoudjit, S. Drid, N. Naït-Saïd, M-S. Naït-Saïd, L. Chrifi-Alaoui, “dSPACE implementation of a propulsion system using dual-induction 'Real-Virtual' motors”, accepted for publucation in Turkish Journal of Electrical Engineering & Computer Sciences,Vol. 21 (2013).
2012
[1] S. Benaicha, F. Zidani, R. Nait Said and M.-S. Nait Said "Design of an improved fault-tolerant control scheme", ELECTROMOTION,
2011
[1] H. Benderradji , L. Chrifi-Alaoui , S. Mahieddine-Mahmoud, A. Makouf. " Robust Control of Induction Motor with H∞ Theory based on Loopshaping ", in Journal of Electrical Engineering & Technology; Vol.6 No.2, 2011.3
[2] M. Behloul, M. S. Nait-Said, S. Drid, “Speed-sensorless sliding-mode direct torque control of induction motors,” ELECTROMOTION journal, Special Issue, Vol. 18, N° 1 (2011) , pp.29-36.
[3] S. Drid, A. Makouf and M.S Naït-Saïd; " Variable speed Doubly Fed Induction Generators Power Control with Wind Turbine Maximum Power Point Tracking"; Journal of Hydrocarbons Mines and Environmental Research, ISSN: 2107-6510, Volume 2, Issue 1a, June 2011,
[4] N. Mekkaoui, S. Drid and M-S Naït-Saïd; " Modeling and Control of Indirect powers of a Doubly Fed Induction Generator"; Journal of Hydrocarbons Mines and Environmental Research, ISSN: 2107-6510, Volume 2, Issue 1a, June 2011,
[5] I. Bakhti, S. Chaouch, A. Maakouf, "Comparative Study of Backstepping control in tow Different Referential for induction Motor with Sliding Mode Observer ", The Mediterranean journal of measurement and control,Vol 9.no.1, nov 2011.
[6] I. Bakhti, S. Chaouch, A. Maakouf, "Sensorless Speed integral Sliding Mode control with adaptive sliding mode observer design of induction motor ", Journal of electrical engineering,Vol 12, no. 2,2011.
[7] I. Bakhti, S. Chaouch, A. Maakouf, "High performance Backstepping control of Induction Motor with Adaptive Sliding Mode Observer", Archives of control science, Volume 21,no. 3,pp. 331-344,2011.
2010
[1] H. Benderradji, A. Makouf, L. Cherifi, Sofiane M. Mahmoud, S. Chaouch, “Robust Control of Induction Motor Using H∞ Method,” ACTA ELECTROTEHNICA, Volume 51, Number 1, 2010.
[2] H. Benderradji, A. Makouf, “Sliding Mode Linearization Control of Induction Motor Using a Sliding Mode Flux Observer” ACTA ELECTROTEHNICA, Volume 51, Number 2, 2010
[3] L. Abdou and S. Chaouch, “Backstepping Control Design of Induction Motor Using Genetic Algorithm,” Praize Worthy Prize Publication Journal IREACO, May 2010.
2009
[1] S. Benaicha, R. Nait-Said, F. Zidani, M.S. Nait-Said and B. Abdelhadi, “A Direct Torque Fuzzy Control of SVM Inverter-fed Induction Motor Drive”, in International Journal of Artificial Intelligence and Soft Computing, Underscience Publishers, Vol. 50, N°1, pp.31-37, 2009.
[2] S. Drid, M.S. Naït-Saïd, A. Makouf , and M. Tadjine, “The Doubly Fed Induction Generator Robust Vector Control based on Lyapunov Method,” Transactions on Systems, Signals and Devices, Vol. 4, No. 2, pp. 237-250 (Issues on Power Electrical Systems) published by Shaker-Verlag (Germany), 2009.
[3] S. Drid, M.S. Nait-Said, A. Makouf, M. Tadjine, “Modelling of a stand-alone doubly-fed induction generator using two separate reference frames,” ELECTROMOTION journal, Vol. 16, N° 4 (2009) , pp. 167-178.
[4] S. Benaicha, R. Nait-Said, F. Zidani and M.S. Nait. Said “ Direct Torque with Fuzzy Logic Torque Ripple Reduction based Stator Flux Vector Control ”, Mediamira Science PuPlisher, ACTA Electrotechnica, Vol. 50, N° 1, pp. 31-37, 2009.
[5] A. Menacer, Gérard Champenois, Mohamed-Said Nait-Said, Abdelhamid Ben Akcha, "Sandrine Moreau and Said Hassaine; " Rotor failures Diagnosis of squirrel Cage Induction Motors with different supplying Sources";Journal of Electrical Engineering & Technology (JEET), Vol. 4, No. 2, pp. 219-228, 2009.
2008
[1] S. Benaicha, R. Nait-Said, F. Zidani and M.S. Nait-Said, "Fuzzy Fault Tolerant Control of Induction Motor", International Journal of Modelling Identification and Control, under science publishers, December 2008
[2] A.Menacer, S. Moreau, G. Champenois, M.S. Nait Said, A.Benakcha, “A parameter identification of the induction machine using the healthy motor model for diagnosis,” Electromotion Journal,, Vol. 15, No. 3 July - September 2008
[3] S. Chafei, F. Zidani, R. Nait-Said, M.S. Nait-Said and M.S. Boucherit, “Fault Detection and Diagnosis on a PWM inverter by Different Techniques”, Journal of Electrical Systems, Vol.4, No. 2, June 2008.
[4] S. Chaouch, M.S. Nait-Said, A. Makouf, M. Hilairet, L. Cherifi, “Several Speed Sensorless Methods of Induction Motor Control,” Journal of ACTA ELECTROTEHNICA, Vol. 49, N° 1, pp.31-41, 2008
[5] S. Chaouch, M.S. Nait-Said, A. Makouf and L. Cherifi,” Backstepping Control Based on Lyapunov Theory for Sensorless Induction Motor with Sliding Mode Observer,” Journal of Arab Research Institute in Sciences & Engineering ARISER, Online Publication Group ISSN 1994-3253, Vol. 4, N°1, pp.19-27, 2008
2007
[1] D.Benoudjit, N.Naït-Saïd and M.S Naït-Saïd, ”Robust Speed Control of a Propulsion System Based on Symetrical Method,” Revue Romaine des Sciences et Techniques, Edition l’Academie Romaine, Série ELECTROTECNIQUE ET ENERGETIQUE, Vol. 52, N°4, pp. 475-487, Oct-Dec, 2007
[2] S. Chaouch, M.S. Nait-Said, A. Makouf, ”Backstepping Control Design of Sensorless Speed Induction Motor Based on MRAS Technique, “ International Review of Electrical Engineering (IREE), Vol. 2, N°5, pp. 738-744, Sept-Oct, 2007
[3] S. Drid, M. Tadjine and M.-S. Naït-Saïd, “Robust Backstepping Vector Control for the Doubly Fed Induction Motor,” Journal of Control Theory Applications of IET (ex IEE), Vol. 1, N°4, pp. 861-868, July 2007
[4] D.Benoudjit, N. Nait-Said, M.S. Nait-Said, “ Differential Speed Control of a Propulsion System using Fractional-Order Controller,”Electromotion Journal, Vol. 14, N° 2 April – June 2007
[5] S. Drid, A. Makouf, M.S Naït-Saïd and M. Tadjine,” Highly Efficient Control of the Doubly Fed Induction Machine,” Journal of Electrical Engineering & Technology of the Korean Institute of Electrical Engineers, Vol. 2, N°43, pp. 478-484, 2007
[6] Kouzi K.; Naït-Saïd, M.S,”Adaptive fuzzy logic speed-sensorless control improvement of induction motor for standstill and low speed operations,” in COMPEL: Int Journal for Computation and Maths. in Electrical and Electronic Eng.,Volume 26, Number 1, 2007, pp. 22-35(14),
2006
[1] Louai F.Z., Nait-Said N. and Drid S., “Implementation of an Efficient Element Free Galerkin Method for Electromagnetic Computation,” Boundary and Finite Element Method, Volume, N° , December 2006, pp:1-6, ELSIEVER, UK.
[2] S. Drid, M-S Nait-Said, A. Makouf, M. Tadjine,” Doubly Fed Induction Generator Modelling and Scalar Controlled for Supplying an Isolated Site,” JES :Journal of Electrical Journal, ISSN 1112-5209, Volume 2, Issue 2, June 2006, pp. 95-103
[3] F. Zidani, D. Diallo, M.E.H Benbouzid, and R. Nait-Said, “Direct Torque Control of Induction Motor with Fuzzy Stator Resistance Adaptation”, IEEE Transactions on Energy Conversion, Vol. 21, No 2, pp. 619-621, 2006.
[4] Louai F.Z., Nait-Said N. and Drid S., “Numerical Analysis of Electromagnetic axisymmetric problems using Element Free Galerkin Method,” JEEEC Journal of Electrical Engineering Elektrotechnický časopis, Vol.56, No 2, 2006, pp:1-6, Slovakia.
2005
[1] F. Zidani, D. Diallo, M.E.H Benbouzid, and R. Nait-Said “Fuzzy adaptive stator resistance estimation for high performance direct torque controlled induction motor,” Electromotion Journal, Vol. 12, N°4, pp. 253-258, December 2005.
[2] Drid S., Tadjine M. and Nait-Said M.S., “Nonlinear Feedback Control and Torque Optimization of a Doubly Fed Induction Motor,” JEEEC Journal of Electrical Engineering Elektrotechnický časopis, Volume 56, N°: 3-4, 2005, pp:57-63, Slovakia.
[3] Drid S., Nait-Said M.S. and Tadjine M., “Double flux oriented control for the doubly fed induction motor,” Electric Power Components & Systems Journal, volume 33, N°:10, October 2005,USA.
[4] F. Zidani and R. Nait-Said, “Direct torque control of induction motor with fuzzy minimization torque ripple,” Journal of electrical Engineering JEEC Vol. 56, pp. 183- 188, July-August 2005.
[5] S. Chaouch and M. S. Nait-Said,” High performance induction motor drive with on– line rotor resistance estimation using sliding mode observer ”, Advances C –, AMSE-Review, pp.27, Vol. 60 nº 3, 2005
[6] B. Abdelhadi, A. Benoudjit and N. Naït-Saïd, “Application of Genetic Algorithm with a novel Adaptive Scheme for the Identification of Induction Machine Parameters”, IEEE Trans. On Energy Conversion, Vol. 20 N°2 , June 2005, pp. 284- 291.
[7] A.Menacer, M. S. Nait-Said, A. H. Benakcha, S. Moreau and S. Drid,” The effect of variation resistance broken bars in induction motor using stator current signature analysis,” pp. 33, Vol. 78 nº 4, Modelling A – 2005, AMSE-Review
[8] S. Benaicha, F. Zidani, R. Nait-Said, M.S. Nait-Said, “Improved performances of DTC control of induction motor drives using fuzzy logic,” Journal of Electrical Engineering- JEE, N°1, Vol.5, pp.30-34, 2005.
[9] L. Mokhnache, C. Kada, A.Boubakeur, N. Nait Said,’Condition Monitoring and fuzzy logic systems for oil insulated transformer diagnoses, JOURNAL OF COMADEM, VOL.8- NO 1, Jan. 2005, PP 13-15
2004
[1] D.Diallo, M.E.H Benbouzid, A.Makouf, “A Fault-Tolerant Control Architecture for Induction Motor Drives in Automotive Applications”, IEEE Transactions on Vehicular Technology, Vol.53; N°6 November 2004
[2] A.Menacer, Naît-Saïd M.S., Benakcha A/H and Drid S., “Stator Current Analysis of Incipient Fault into Induction Machine Rotor Bars,” Journal of Electrical Engineering, JEE, Volume 4, No.2, 2004 pp:5-12.
[3] F. Zidani and M.S. Naït-Saïd, “An Induction Motor Drive System with Fuzzy Fault Tolerance,” Electromotion Journal, Jul.-Sep., pp. 129-139, 2004
[4] K. Belarbi, L. Mokrani and M.S. Naït-Saïd, “A Fuzzy Global Efficiency Optimization of a Photovoltaic Water Pumping Système,” Solar Energy Review, ELSEVIER Editions, Solar Energy Vol. 77, pp. 203-216, 2004
[5] B. Abdelhadi, A. Benoudjit and N. Naït-Saïd, “Identification of induction machine parameters using a new adaptive genetic algorithm”, Electric Power Components & Systems journal, Vol. 32 N° 8, August 2004
[6] S. Drid, M.S. Naït-Saïd and M.Tadjine “The Doubly Fed Induction Machine Modeling in the Separate Reference Frame,” Journal of Electrical Engineering (JEE), Vol. 4, N°1, pp. 11-16, 2004
[7] A.Menacer , M.S. Naït-Saïd, A/H Benakcha and S. Drid, “Stator Current Analysis of Incipient Fault into Asynchronous Motor Rotor Bars using Fourier Fast Transform, ” Journal of Electrical Engineering Electrotechnicky caspopis (JEEec), Slovakia, Vol. 55, NO. 5-6, pp. 122-130, July 2004
[8] F. Zidani, M.S. Naït-Saïd, MEH Benbouzid,“ Speed Sensorless Fuzzy Sliding Mode Control of Induction Motor,” Journal of Electrical Engineering (JEE), Vol. 4, N°1, pp. 38-46, 2004
[9] S. Chaouch, M.S. Naït-Saïd, “Rotor Time Constant Identification by Adaptive Sliding Mode Observer for Induction Motor Vector Controlled,” Journal of Electrical Engineering (JEE), Vol. 4, N°1, pp.47-52, 2004
[10] S. Chaouch, M.S. Naït-Saïd, “Speed Sensorless Stator Flux Orientation Control of the the Induction Motor,” Journal of Electrical Engineering (JEE), Vol. 4, N°1, pp. 53- 57, 2004
[11] S. Chaouch, M.S.Nait Said., « High performances induction motor with on-line rotor resistance estimation using sliding mode observer» Journal AMSE France.
[12] N. Naït-Saïd, M.S. Naït-Saïd and N. Bouguechal, “Rotor Resistance Estimation of an Induction Motor to Detect Broken Bars Fault Using H-H Method,” Journal of Electric Power component and Systems, Vol. 32,N°2, pp. 149-161, USA, February 2004
[13] A.Makouf, M.E.H Benbouzid, D.Diallo N.E.Bouguechal, “A practical scheme for induction motor speed sensorless field Oriented control”, IEEE Transactions on Energy Conversion, Vol.19 N°1 March 2004.
2003
[1] F. Zidani, M.E.H. Benbouzid, Demba Diallo and M.S. Naït-Saïd, “Induction Motor Stator Faults Diagnosis by a Current Concordia Pattern-Based Fuzzy Decision System,” IEEE Transactions On Energy Conversion, Vol. 18, NO. 4, pp. 469-475, December 2003
[2] F.Zidani, M.S. Naït-Saïd, et all, “A fuzzy Method for Rotor Time Constant Estimation for High Performance Induction Motor Vector Control, “Journal of Electric Power Component and Systems, Vol. 31, N°2, pp. 1007-1019, USA, 2003.
[3] K. Kouzi, L. Mokrani and M.S. Naït-Saïd, “ Fuzzy Logic Controller with Fuzzy adapted Gains based on Indirect Vector Control for Induction Motor Drive,” Journal of Electrical Engineering (JEE), Vol. 5, N°2, pp. 48-53, 2003
[4] B. Abdelhadi, A. Benoudjit and M.S. Naït-Saïd, “Investigation paprameters identification methods for induction machines,”, AMSE Journal, Association for Advanced of Modeling & Simulation Techniques in Entreprises, Modeling A, Vol. 76, N°8, pp. 33-38, 2003
[5] M.E.H Benbouzid, D.Diallo, A.Makouf, “A Fault tolerant control management system for electric vehicle or Hybrid electric vehicle induction motor drives ” Electromotion journal, Vol.10, n°1, pp 45-50, March 2003.
[6] N. Naït-Saïd, M.S. Nait- Said and M. Feliachi, "Dynamic inductance modeling using artificial neural network for saturated induction machine", Electromotion Journal , Vol.10, N°1, pp.12-18, January/March 2003.
2002
[1] F.Zidani, M.S. Naït-Saïd, et all “Fuzzy approach for induction motor fault diagnosis, “Archives of Electrical Engineering Journal (AEE), Pologne , Vol. LI, N°2, pp. 137- 146, 2002
[2] F.Zidani, M.S. Naït-Saïd, et all" Fuzzy Technique for Loss Minimization in Scalarcontrolled Induction Motor,” Journal of Electric Power component and Systems, USA, Vol. 30, N°6 pp. 626-635 June 2002
[3] A.Makouf, M.E.H Benbouzid, D.Diallo N.E.Bouguechal, “A Robust H∞ Control approach for induction motors,” Electromotion, Vol.9, n°2,pp 63-70, April-June 2002
[4] F. Zidani, R. Abdessemed, M.E.H. Benbouzid et M.S. Nait Said, "Induction Motor faults detection using fuzzy logic technique", Review of Electrical Engineering Research Reports, No 13 , pp.28-37, April 2002.
2001
[1] F.Zidani, M.S. Naït-Saïd, et all “A Fuzzy Rotor Resistance Updating Scheme for an IFOC Induction Motor Drive,” IEEE Power Engineering Review, Vol. 21, N°11, pp. 47-50. November 2001
[2] A.Makouf, M.E.H Benbouzid, D.Diallo N.E.Bouguechal, “ H∞ and Input Output approach for induction motor robust control,” Electrical Engineering research Report, n°11, pp.1-6, July 2001.
[3] F.Zidani, M.S. Naït-Saïd, D. Diallo and M.E.H Benbouzid "High performance induction motor drive using fuzzy logic”, Electromotion Journal, , Vol.8, N°2, pp. 89- 97, April-June 2001
[4] F. Zidani, M.S. Nait-Said and R. Abdessamed, Comparison of Three of Controllers in flied oriented control of an induction machine, AMSE Journal, Association for Advanced of Modeling & Simulation Techniques in Entreprises, Vol. 74, N°1, pp.37- 48, 2001
2000
[1] A.Benoudjit, A. Guettafi and N. Naït-Saïd, “Axial flux Induction Motors for on Wheel Drive Propulsion System”, Electric Machines and Power Systems journal ,Vol. 28 N° 12, pp. 1107-1125, December
[2] M.S. Naït-Saïd, M.E.H. Benbouzid, “Detection of broken bars in induction motors using HH-Method,” in IEEE Power Engineering Letters, pp. 58-59, November 2000
[3] M.S. Naït-Saïd, M.E.H. Benbouzid, "H-G diagram based rotor parameters identification for induction motors thermal monitoring," IEEE Transactions on Energy Conversion, Vol. 15, N°1, pp.14-18, March 2000
[4] M.S. Naït-Saïd, M.E.H. Benbouzid, A. Benchaib, "Detection of Broken Bar in Induction Motors using an Extented Kalman Filter for Rotor Resistance Sensorless Estimation," IEEE Transactions On Energy Conversion, Vol. 15, N°1, pp. 66-70, March 2000.