@inbook {6982,
	title = {3D Printing Analysis by Powder Bed Printer (PBP) of a Thoracic Aorta Under Simufact Additive},
	booktitle = {Additive Manufacturing Technologies From an Optimization Perspective},
	year = {2019},
	abstract = {In recent decades, vascular surgery has seen the arrival of endovascular techniques for the treatment of vascular diseases such as aortic diseases (aneurysms, dissections, and atherosclerosis). The 3D printing process by addition of material gives an effector of choice to the digital chain, opening the way to the manufacture of shapes and complex geometries, impossible to achieve before with conventional methods. This chapter focuses on the bio-design study of the thoracic aorta in adults. A bio-design protocol was established based on medical imaging, extraction of the shape, and finally, the 3D modeling of the aorta; secondly, a bio-printing method based on 3D printing that could serve as regenerative medicine has been proposed. A simulation of the bio-printing process was carried out under the software Simufact Additive whose purpose is to predict the distortion and residual stress of the printed model. The binder injection printing technique in a Powder Bed Printer (PBP) bed is used. The results obtained are very acceptable compared with the results of the error elements found.},
	author = {Ameddah, Hacene and Mazouz,  Hammoudi}
}
@proceedings {7001,
	title = {Analysis of the shock absorber thickness on the rehabilitation of the fracture of liner on alumina in acetabular cup (Titanium - Alumina) in the total hip prosthesis},
	journal = {The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019) , April 10-11},
	year = {2019},
	address = {Oran, Algeria},
	author = {Bouakkar, Loubna and Ameddah, Hacene and Mazouz,  Hammoudi}
}
@proceedings {6989,
	title = {The effect of the cutting conditions parameters on temperature by the Taguchi optimization method},
	journal = {The 7th International Conference on Advances in Mechanical Engineering and Mechanics ICAMEM 2019 Hammamet - December 16-18,},
	year = {2019},
	address = {Hammamet, Tunisia},
	author = {Mebrek, Hamama and Ameddah, Hacene and Mansouri, Salah}
}
@proceedings {6958,
	title = {The effect of the cutting conditions parameters on the temperature by the Taguchi optimization method},
	journal = {The 7eme International Conference on Advances in Mechanical Engineering and Mechanics ICAMEM 2019, December 16-18},
	year = {2019},
	address = {Hammamet, Tunisia},
	author = {Mebrek, Hamama and Ameddah, Hacene and Mansouri, Salah}
}
@proceedings {6998,
	title = {Electromechanical Analysis (MEMS) of a Capacitive Pressure Sensor of a Neuromate Robot Probe},
	journal = {The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11,},
	year = {2019},
	address = {Oran, Algeria},
	author = {Ameddah, Hacene and Bettine, Farida and Mazouz,  Hammoudi}
}
@proceedings {6999,
	title = {Etude Num{\'e}rique du Comportement des Endoproth{\`e}ses Cardiovasculaires (Cas de Stent Biod{\'e}gradable)},
	journal = {The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11},
	year = {2019},
	address = {Oran, Algeria},
	author = {Ameddah, Hacene and Lounansa, Salim and Amadji,   Moussa and Mazouz,  Hammoudi}
}
@proceedings {6988,
	title = {Finite element analysis of fatigue behavior of the biodegradable stent},
	journal = {The 7th International Conference on Advances in Mechanical Engineering and Mechanics ICAMEM 2019 Hammamet - 16-18,},
	year = {2019},
	address = {Hammamet, Tunisia},
	author = {Ameddah, Hacene and Lounansa, Salim and Mazouz,  Hammoudi}
}
@proceedings {7002,
	title = {Minimisation des contraintes dans les proth{\`e}ses totales de genou},
	journal = {The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019) , April 10-11},
	year = {2019},
	address = {Oran, Algeria},
	author = {Mezach,  Fatima and Ameddah, Hacene and Mazouz,  Hammoudi}
}
@proceedings {7000,
	title = {Numerical Study of the Behavior of Biomimetic Prosthesis \&ldquo;Case of the M6-C Prosthesis with Viscoelastic Core\&rdquo;},
	journal = {The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11,},
	year = {2019},
	address = {Oran, Algeria},
	author = {Amadji,   Moussa and Ameddah, Hacene and Mazouz,  Hammoudi}
}
@article {6972,
	title = {NUMERICAL STUDY OF THE BIOMIMETIC M6-C PROSTHESIS WITH VISCOELASTIC CORE},
	journal = {U.P.B. Sci. Bull., Series D},
	volume = {81},
	number = {4},
	year = {2019},
	abstract = {In this work we present a new biomimetic disc prosthesis imitating the fibroreinforced osmotic, and viscoelastic properties of the biological intervertebral disc (BID). For this, we proposed to study the second-generation biomimetic prosthesis "the M6-C prosthesis" which contains two metal plates, a core and a fiber fabric. First, a 3D model was established, the finite element analysis (FEA) under the ANSYS{\textcopyright}2015 was conducted. Secondly, a biomimetic material, the silicone rubber, was compared with the polyethylene to find the material that mimics the behavior of a biological disk. Finally, the analysis of the results found the polymer has the same mechanical properties as the nucleus pulposus, in particular the viscoelastic behaviour compared with that of polyethylene},
	url = {https://www.scientificbulletin.upb.ro/rev_docs_arhiva/full524_939736.pdf},
	author = {Amadji,   Moussa and Ameddah, Hacene and Mazouz,  Hammoudi}
}
@proceedings {6997,
	title = {Traitement d\&rsquo;Images M{\'e}dicales et D{\'e}tection de Contours d\&rsquo;Images Echographiques pour la Reconstruction 3D},
	journal = {The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11},
	year = {2019},
	address = {Oran, Algeria},
	author = {Ameddah, Hacene and Mebarki,  Ghazali and Mazouz,  Hammoudi}
}
@mastersthesis {5612,
	title = {Optimisation de la rugosit{\'e} de surface de l\&$\#$39;acier doux en utilisant la m{\'e}thode de surface de r{\'e}ponse (Tagushi)},
	year = {2019},
	author = {MOUMEN Fateh and HEMAL Ayache}
}
@mastersthesis {5611,
	title = {Etude de l\&$\#$39;influence de la g{\'e}om{\'e}trie de l\&$\#$39;outil de coupe et des param{\`e}tres de coupe sur la rugosit{\'e} de la surface},
	year = {2019},
	author = {HIBECHE Billal}
}
@mastersthesis {5610,
	title = {Etude bibliographique sur les rev{\^e}tements des outils de coupe},
	year = {2019},
	author = {BOUDIAF Ramzi and SAI Anisse}
}
@mastersthesis {5609,
	title = {D{\'e}termination de la hauteur de cr{\^e}te pour le fraisage en bout : application aux  fraises de forme},
	year = {2019},
	author = {MEKKENTICHI Sifeddine and DJABALI Salem Chihab Eddine}
}
@proceedings {5586,
	title = {Etude de l\&rsquo;influence de quelques param{\`e}tres sur la stabilit{\'e} du fraisage des parois minces avec trac{\'e} des lobes de stabilit{\'e}},
	journal = {The international conference on innovative materials, manufacturing, and advanced technologies (IMMAT{\textquoteright}2019), Monastir   17-19 Octobre 2019, Tunisie},
	year = {2019},
	url = {https://immat2019.sciencesconf.org/data/pages/programme_IMMAT2019_12_octobre_VF_9.pdf},
	author = {Azoui Cherifa and Benmohammed Brahim}
}
@proceedings {5585,
	title = {Numerical simulation of chip formation in case of orthogonal machining process},
	journal = {The international conference on innovative materials, manufacturing, and advanced technologies (IMMAT{\textquoteright}2019), Monastir   17-19 Octobre, Tunisie},
	year = {2019},
	url = {https://immat2019.sciencesconf.org/data/pages/programme_IMMAT2019_12_octobre_VF_9.pdf},
	author = {Benali Abderraouf and Benmohammed Brahim}
}
