@proceedings {6961,
	title = {Study on the effect of polymers on the corrosion of metal and steel by means of different experimental techniques},
	journal = {3{\`e}me International Workshop on Thermodynamic of metallic alloys, {\textquoteright}WITAM{\textquoteright}2017{\textquoteright}},
	year = {2017},
	address = {Batna, Alg{\'e}rie},
	author = {Hamadi, Latifa and Oulmi, Kafia and Mansouri, Salah and Kareche, Abdelhak}
}
@article {6935,
	title = {Characterization of the Microstructural and Mechanical Properties of MoZrN Coating},
	journal = {Journal of Nano- and Electronic Physics},
	volume = {9},
	number = {1},
	year = {2017},
	abstract = {
	
		
			
				The aim of this paper is evaluation of properties of samples with The ternary nitride (Mo,Zr)N thin films were grown on silicon and steel XC100 substrates by the reactive RF magnetron sputtering technique. The substrates were exposed to ion bombardmen coating, which was deposited on two types of substrates. Silicon was made by melt technology, this method belongs to PVD (Physical Vapour deposition) process. Thin PVD coatings deposited onto surface of tools and machine parts are widely used in a range of sectors, for example in machine engineering. These materials, wear resistance and thermal and chemical stability of the surface. Structure, chemical composition a properties of thin layers depend on technological parameters of the PVD process and preparation of steel substrate. High requirements on the quality of thin PVD coatings resulted in development of methods used to evaluate of their properties. The theckness is one of the important characteristics of mechanical properties of the coated parts. The surface morphology, microstructure, and composition were studied by atomic force microscopy (AFM) nanoindentation, scanning electron microscopy (SEM) and X-ray diffractometer.
			
		
	

},
	url = {https://jnep.sumdu.edu.ua/en/component/content/full_article/2155},
	author = {Abboudi, Abdelaziz and Chermime, Brahim and Djebaili, Hamid and Brioua, Mourad}
}
@article {6934,
	title = {Mechanical and Structural Studies of Ternary Mo\&ndash;Zr\&ndash;N Layers Deposited on Substrate by PVD},
	journal = {Металлофизика и новейшие технологии},
	volume = { 39},
	number = {6},
	year = {2017},
	pages = {779-793},
	author = {Abboudi, Abdelaziz and Chermime, Brahim and Djebaili, Hamid and Brioua, Mourad}
}
@article {6927,
	title = {MEASUREMENT AND NUMERICAL SIMULATION OF THE CUTTING TEMPERATURE IN CUTTING TOOL DURING TURNING OPERATION},
	journal = {Journal of Engineering Science and Technology},
	volume = {12},
	number = {5},
	year = {2017},
	pages = {1307 - 1317},
	abstract = {
	In many manufacturing processes particularly during metal removing processes, it is sometimes desirable and often necessary to have information on the quantity of heat produced and therefore the increase in temperature and its distribution, heat generated at the tool-workpiece interface during machining is an important factor to solve the metal cutting problems such as dimensional accuracy, the surface integrity and the life of the tool. In the present work, the evolution of the cutting temperature was studied using a combined experimental and numerical approaches; the thermocouple method was used to measure the cutting temperature for turning operations of the steel AISI 1060. 3D cutting model was used to simulate and predict the thermal phenomenon of the heat propagation in the cutting tool, using digital COMSOL simulation software. Based on a comparison between the results of two approaches; numerical and experimental, it was found a correspondence to go up to 96\%, taking into account the maximum temperature.

},
	url = {https://jestec.taylors.edu.my/Vol\%2012\%20issue\%205\%20May\%202017/12_5_13.pdf},
	author = {Abdelkrim, Mourad and Brioua, Mourad and Belloufi, Abderrahim}
}
@article {3776,
	title = {Characterisation of Mo\&ndash;V\&ndash;N Coatings Deposited on XC100 Substrate by Sputtering Cathodic Magnetron},
	journal = {Металлофизика и новейшие технологии},
	year = {2017},
	publisher = {Інститут металофізики ім. ГВ Курдюмова НАН України},
	isbn = {1024-1809},
	url = {https://scholar.google.com/scholar?hl=fr\&as_sdt=0\%2C5\&q=Characterisation+of+MoVN+coatings+desposited+on+XC100+substrate+by+sputtering+cathodic+magnetron+Vol+39+no+5+pp+665-675+\&btnG=},
	author = {Chermime, Brahim and Abboudi, Abdelaziz and Djebaili, Hamid and Brioua, Mourad}
}
@proceedings {3774,
	title = {Biomechanical Characterization of Failure the 316L Stainless Steel for Femoral Compression Plates},
	journal = {Journal of Biomimetics, Biomaterials and Biomedical Engineering},
	volume = {34},
	year = {2017},
	pages = {68-74},
	publisher = {Trans Tech Publ},
	isbn = {3035713340},
	url = {https://www.scientific.net/JBBBE.34.68},
	author = {Boukhobza, Abdelyamine and Brioua, Mourad and Benaicha, Smail and Fedaoui, Kamel}
}
@article {3770,
	title = {The influence of fiber arrangement on the mechanical properties of short fiber reinforced thermoplastic matrix composite},
	journal = {Revue des Composites et des Materiaux Avances},
	volume = {27},
	number = {3-4},
	year = {2017},
	pages = {261},
	publisher = {Lavoisier},
	isbn = {1169-7954},
	url = {https://search.proquest.com/openview/ecf43dbe4b75d6dd886b77267e4d5749/1?pq-origsite=gscholar\&cbl=2069445},
	author = {MANSOURI, Khalifa and Djebaili, Hamid and Brioua, Mourad}
}
@article {3765,
	title = {Effect of passivation on chloride concentration threshold of steel reinforcement corrosion},
	journal = {Anti-Corrosion Methods and Materials},
	year = {2017},
	publisher = {Emerald Publishing Limited},
	url = {https://scholar.google.com/scholar?hl=fr\&as_sdt=0\%2C5\&q=Effect+of+passivation+on+chloride+concentration+threshold+of+steel+reinforcement+corrosion\&btnG=},
	author = {Bouzeghaia, Nora and Mihi, Abdelkader and A{\"\i}t-Mokhtar, Abdelkarim and Naoun, Mehieddine}
}
