@article {6977,
	title = {Design of mechanically compatible lattice structures cancellous bone fabricated by fused filament fabrication of Z-ABS material},
	journal = {Mechanics of Advanced Materials and Structures },
	year = {2022},
	abstract = {
	Designing and manufacturing replacement cancellous bone structures by lattice structures and Additive Manufacturing (AM) techniques is an effective method to create lightweight orthopedic implants while ensuring that they are mechanically compatible and their osseointegration ability with the host bone. In this article, we suggest a new design based on three lattice structures from triply periodic minimal surfaces (TPMS) with a different volume porosity to replace cancellous bone based on predicting the mechanical stiffness. To predict the mechanical stiffness, the relationship between the effective modulus of elasticity and different porosity ratios of the lattice structures was determined by using three methods: i) finite element modeling (FEM) simulation, ii) Gibson and Ashby method and iii) a uniaxial compression test after manufacturing the lattice structures by using Fused Filament Fabrication (FFF) Technology. To demonstrate the efficiency of our approach, the comparison of both numerical and experimental results showed that the effect of structure difference and porosity ratio of lattice structures on the mechanical stiffness values effectively match the cancellous bone in terms of elastic modulus and porosity ratio.

},
	url = {https://www.tandfonline.com/doi/abs/10.1080/15376494.2022.2053904},
	author = {Ali-Alkebsi, Ebrahim-Ahmed and Toufik Outtas and Almutawakel, Abdallah and Ameddah, Hacene and Kanit, Toufik}
}
@conference {6931,
	title = {Computer Aided Inspection by Reverse Engineering for Reproduction of Gear Teeth},
	booktitle = {International Conference on Advanced Materials Mechanics \& Manufacturing},
	year = {2022},
	pages = {292{\textendash}298},
	publisher = {Advances in Mechanical Engineering and Mechanics II },
	organization = {Advances in Mechanical Engineering and Mechanics II },
	abstract = {
	In the industry, automated inspection is important for ensuring the high quality and allows acceleration of procedures for quality control of parts or mechanical assemblies. Although significant progress has been made in precision machining of complex surfaces, precision inspection of such surfaces remains a difficult problem. Thus the problem of the conformity of the parts of complex geometry is felt more and more. Motivated by the need to increase quality and reduce costs, and supported by the progress made in the field of it as well as the automation of production which in recent years has seen a considerable evolution in all these stages: from design to control through manufacturing. Due to, we used a 3D computer aided inspection technique on a physical gear using a coordinate measuring machine equipped with a {\textquotedblleft}PC-DMIS{\textquotedblright} measurement and inspection software. Our work consists in developing a procedure for inspection for reproduction of gear profile by reconstruction of a circle involute gear from a cloud point{\textquoteright}s measurement. In order to obtain a reliable result. In this works, we design the CAD-model of the part as accurately as possible (using a mathematical model) and matched with the 3D points cloud that represents the measurement that obtained from scanner. we compare the measurement cloud points from coordinate measurement machine with the mathematical model of construction by ICP (Iterative Closest Point) methods in order to obtain a conformed result and to show the impact of the dimensional inspection and geometric.

},
	url = {https://link.springer.com/chapter/10.1007/978-3-030-86446-0_38},
	author = {Selloum, Rabia and Ameddah, Hacene and Brioua, Mourad}
}
@proceedings {6993,
	title = {Fatigue behavior study of the biodegradabe cardiovascular stent.},
	journal = {5th Tunisian Congress on Mechanics ~COTUME 2020 ~Hammamet 22 au 24 Mars },
	year = {2021},
	author = {Ameddah, Hacene and Lounansa, Salim and Mazouz,  Hammoudi}
}
@proceedings {6992,
	title = {Computer Aided Inspection by Reverse Engineering for Reproduction of Gear Teeth},
	journal = {5th Tunisian Congress on Mechanics ~COTUME 2020 ~22 au 24 Mars },
	year = {2021},
	address = {Hammamet, Tunisia},
	author = {Selloum, Rabia and Ameddah, Hacene and Brioua, Mourad}
}
@inbook {6981,
	title = {3D Printing Analysis by Powder Bed Printer (PBP) of a Thoracic Aorta Under Simufact Additive},
	booktitle = {Research Anthology on Emerging Technologies and Ethical Implications in Human Enhancement},
	year = {2021},
	pages = { 774-785},
	abstract = {
	In recent decades, vascular surgery has seen the arrival of endovascular techniques for the treatment of vascular diseases such as aortic diseases (aneurysms, dissections, and atherosclerosis). The 3D printing process by addition of material gives an effector of choice to the digital chain, opening the way to the manufacture of shapes and complex geometries, impossible to achieve before with conventional methods. This chapter focuses on the bio-design study of the thoracic aorta in adults. A bio-design protocol was established based on medical imaging, extraction of the shape, and finally, the 3D modeling of the aorta; secondly, a bio-printing method based on 3D printing that could serve as regenerative medicine has been proposed. A simulation of the bio-printing process was carried out under the software Simufact Additive whose purpose is to predict the distortion and residual stress of the printed model. The binder injection printing technique in a Powder Bed Printer (PBP) bed is used. The results obtained are very acceptable compared with the results of the error elements found.

},
	author = {Ameddah, Hacene and Mazouz,  Hammoudi}
}
@inbook {6980,
	title = {A Particle Swarm Optimization-Based Approach for Finding Reliability in a Total Hip Prosthesis},
	booktitle = {Artificial Neural Network Applications in Business and Engineering},
	volume = {10},
	year = {2021},
	pages = {222-242},
	abstract = {
	Nowadays, we assist the global extension of reliability optimization problems from the design phase of systems and sub-systems to the design and operational phases, not only of systems and sub-systems, but also of bio functionality design. This chapter investigates the relative performances of particle swarm optimization (PSO) variants when used to find reliability in the total hip prosthesis by finding the maximization of jumping distance (JD) to avoid dislocation and the minimization of system{\textquoteright}s stability to offer mobility. Statistical analysis of different cases of head diameters of 22, 28, 36, 40 mm has been conducted to survey the convergence and relative performances of the main PSO variants when applied to solve reliability in the total hip prosthesis.

},
	author = {Bouakkar, Loubna and Ameddah, Hacene and Mazouz,  Hammoudi}
}
@inbook {6979,
	title = {Integrated Kinematic Machining Error Compensation for Impeller Rough Tool Paths Programming in a Step-Nc Format Using Neural Network Approach Prediction},
	booktitle = {Artificial Neural Network Applications in Business and Engineering},
	volume = {7},
	year = {2021},
	pages = {144-170},
	abstract = {
	The most important components used in aerospace, ships, and automobiles are designed with free form surfaces. An impeller is one of the most important components that are difficult to machine because of its twisted blades. This research book is based on the premise that a STEP-NC program can document {\textquotedblleft}generic{\textquotedblright} manufacturing information for an impeller. This way, a STEP-NC program can be made machine-independent and has an advantage over the conventional G-code-based NC program that is always generated for a specific CNC machine. Rough machining is recognized as the most crucial procedure influencing machining efficiency and is critical for the finishing process. The research work reported in this chapter focuses on introduces a fully STEP-compliant CNC by putting forward an interpolation algorithm for non uniform rational basic spline (NURBS) curve system for rough milling tool paths with an aim to solve the problems of kinematic errors solutions in five axis machine by neural network implementation.

},
	author = {Ameddah, Hacene}
}
@article {6978,
	title = {A Study of the Thermo-Mechanical Behavior of a Gas Turbine Blade in Composite Materials Reinforced with Mast},
	journal = {Revue des Composites et des Mat{\'e}riaux Avanc{\'e}s },
	volume = {31},
	number = {2},
	year = {2021},
	pages = {101-108},
	abstract = {
	The turbine blades are subjected to high operating temperatures and high centrifugal tensile stress due to rotational speeds. The maximum temperature at the inlet of the turbine is currently limited by the resistance of the materials used for the blades. The present paper is focused on the thermo-mechanical behavior of the blade in composite materials with reinforced mast under two different types of loading. The material studied in this work is a composite material, the selected matrix is a technical ceramic which is alumina (aluminum oxide Al2O3) and the reinforcement is carried out by short fibers of high modulus carbon to optimize a percentage of 40\% carbon and 60\% of ceramics. The simulation was performed numerically by Ansys (Workbench 16.0) software. The comparative analysis was conducted to determine displacements, strains and Von Mises stress of composite material and then compared to other materials such as Titanium Alloy, Stainless Steel Alloy, and Aluminum 2024 Alloy. The results were compared in order to select the material with the best performance in terms of rigidity under thermomechanical stresses. While comparing these materials, it is found that composite material is better suited for high temperature applications. On evaluating the graphs drawn for, strains and displacements, the blade in composite materials reinforced with mast is considered as optimum.

},
	url = {https://web.p.ebscohost.com/abstract?direct=true\&profile=ehost\&scope=site\&authtype=crawler\&jrnl=11697954\&AN=150327484\&h=7ulgGLhEK1cHheH7WT\%2fPldRi3xnIKlqCCBtv1hAmPM9ba9zSe9KSz8CP5sMGQ30ty4ok\%2f4GMtFxU4Teg6NsurQ\%3d\%3d\&crl=c\&resultNs=AdminWebAuth\&resultLoca},
	author = {Khalid, Faiza and Manaa, Rabah and Saad, Salah and Ameddah, Hacene}
}
@article {6970,
	title = {Design of graded lattice structures in turbine blades using topology optimization},
	journal = {International Journal of Computer Integrated Manufacturing},
	volume = {34},
	number = {4},
	year = {2021},
	abstract = {
	Designing and manufacturing lattice structures with Topology Optimization (TO) and Additive Manufacturing (AM) techniques is a novel method to create light-weight components with promising potential and high design flexibility. This paper proposes a new design of lightweight-graded lattice structures to replace the internal solid volume of the turbine blade to increase its endurance of high thermal stresses effects. The microstructure design of unit cells in a 3D framework is conducted by using the lattice structure topology optimization (LSTO) technique. The role of the LSTO is to find an optimal density distribution of lattice structures in the design space under specific stress constraints and fill the inner solid part of the blade with graded lattice structures. The derived implicit surfaces modelling is used from a triply periodic minimal surfaces (TPMS) to optimize the mechanical performances of lattice structures. Numerical results show the validity of the proposed method. The effectiveness and robustness of the constructed models are analysed by using finite element analysis. The simulation results show that the graded lattice structures in the improved designs have better efficiency in terms of lightweight (33.41{\textendash}40.32\%), stress (25.52{\textendash}48.55\%) and deformation (7.35{\textendash}19.58\%) compared to the initial design.

},
	url = {https://www.tandfonline.com/doi/abs/10.1080/0951192X.2021.1872106},
	author = {Ali-Alkebsi, Ebrahim-Ahmed and Ameddah, Hacene and Toufik Outtas and Almutawakel, Abdallah}
}
@conference {6932,
	title = {Inspection on a Three-Dimensional Measuring Machine for a Virtual Model for Additive Manufacturing},
	booktitle = {International Conference on Advances in Mechanical Engineering and Mechanics},
	year = {2021},
	pages = {138{\textendash}143},
	publisher = {Advances in Mechanical Engineering, Materials and Mechanics },
	organization = {Advances in Mechanical Engineering, Materials and Mechanics },
	abstract = {
	Today, and to quickly meet the high demands of variability, supply chain efficiency and energy optimization, business markets are looking for modern manufacturing technologies and as a solution, industry 4.0 is using the benefits of integrating modern manufacturing technologies and information systems to promote production capabilities. In this context, intelligent industry represents a new generation of automatic production systems based on the concepts of intelligent industry, intelligent manufacturing, control and intelligent inspection, such as inspection on coordinate measuring machines (CMMs). This technology allows many machines to be integrated into a plant and controlled online using the MBD (Model Based Design) quality system. The problem of conformity of parts with complex geometry is becoming more and more important. The objective of this work is to present a 3D inspection technique on a virtual model (MBD: Model Based Design), using a coordinate measuring machine equipped with a {\textquotedblleft}POWER INSPECT{\textquotedblright} measurement and inspection software. The interest of this technique is to show the impact of the dimensional inspection and geometric tolerance process of the CAD model for the CAI (Computer aided Inspection) approach on the fidelity of the finished product for additive manufacturing (AM) including intelligent industry.

},
	url = {https://link.springer.com/chapter/10.1007/978-3-030-52071-7_20},
	author = {Ameddah, Hacene and Selloum, Rabia and Brioua, Mourad}
}
@proceedings {6987,
	title = {Comportement {\`a} la fatigue du stent biod{\'e}gradable : Cas de la diastole et de la systole},
	journal = {Congres Alg{\'e}rien de M{\'e}canique CAM2019 Ghardaia 23-26 F{\'e}vrier},
	year = {2020},
	author = {Ameddah, Hacene and Lounansa, Salim and Mazouz,  Hammoudi}
}
@proceedings {6991,
	title = {Improvement Inspection Method for Rapid Prototyping of an involute spur gears for an Additive Manufacturing process.},
	journal = {International Conference on 3D Printing and Additive Manufacturing November 23-24, Webinar, From your imagination to a 3D model},
	year = {2020},
	address = {Dubai, UAE},
	author = {Selloum, Rabia and Ameddah, Hacene and Brioua, Mourad}
}
@conference {6976,
	title = {Inspection on a Three-Dimensional Measuring Machine for a Virtual Model for Additive Manufacturing},
	booktitle = {International Conference on Advances in Mechanical Engineering and Mechanics},
	year = {2020},
	pages = {138{\textendash}143},
	address = {Advances in Mechanical Engineering, Materials and Mechanics},
	abstract = {Today, and to quickly meet the high demands of variability, supply chain efficiency and energy optimization, business markets are looking for modern manufacturing technologies and as a solution, industry 4.0 is using the benefits of integrating modern manufacturing technologies and information systems to promote production capabilities. In this context, intelligent industry represents a new generation of automatic production systems based on the concepts of intelligent industry, intelligent manufacturing, control and intelligent inspection, such as inspection on coordinate measuring machines (CMMs). This technology allows many machines to be integrated into a plant and controlled online using the MBD (Model Based Design) quality system. The problem of conformity of parts with complex geometry is becoming more and more important. The objective of this work is to present a 3D inspection technique on a virtual model (MBD: Model Based Design), using a coordinate measuring machine equipped with a {\textquotedblleft}POWER INSPECT{\textquotedblright} measurement and inspection software. The interest of this technique is to show the impact of the dimensional inspection and geometric tolerance process of the CAD model for the CAI (Computer aided Inspection) approach on the fidelity of the finished product for additive manufacturing (AM) including intelligent industry.},
	url = {https://link.springer.com/chapter/10.1007/978-3-030-52071-7_20},
	author = {Ameddah, Hacene and Selloum, Rabia and Brioua, Mourad}
}
@proceedings {6985,
	title = {Inspection sur une machine {\`a} mesurer tridimensionnelle en vue d\&rsquo;un tol{\'e}rancement d\&rsquo;un mod{\`e}le virtuel pour la fabrication additive,},
	journal = {Congres Alg{\'e}rien de M{\'e}canique CAM2019 Ghardaia 23-26 F{\'e}vrier},
	year = {2020},
	author = {Selloum, Rabia and Ameddah, Hacene and Brioua, Mourad}
}
@proceedings {6986,
	title = {L\&rsquo;utilisation de la fabrication additive en ing{\'e}nierie tissulaire pour le cas d\&rsquo;une implantation tissulaire dans le d{\'e}faut osseux de la jambe},
	journal = {Congres Alg{\'e}rien de M{\'e}canique CAM2019 , 23-26 F{\'e}vrier},
	year = {2020},
	address = {Ghardaia, Alg{\'e}rie},
	author = {Ali-Alkebsi, Ebrahim-Ahmed and Ameddah, Hacene and Toufik Outtas}
}
@proceedings {6990,
	title = {Non-Destructive Evaluation for an Exactitude Reproduction of Form by Reverse Engineering in an Additive Manufacturing Process.},
	journal = {ASTM International Conference on Additive Manufacturing ICAM2020, November 16-20, Webinar},
	year = {2020},
	author = {Selloum, Rabia and Ameddah, Hacene and Brioua, Mourad}
}
@conference {6933,
	title = {OPTIMAL SHAPE REPRODUCTION OF AN INTERVERTEBRAL PROSTHESIS \&ldquo;COFLEX\&rdquo; FOR ADDITIVE MANUFACTURING},
	booktitle = {7th International Conference Integrity-Reliability-Failure},
	year = {2020},
	pages = {487-488},
	publisher = {J.F. Silva Gomes and S.A. Meguid (editors), INEGI-FEUP},
	organization = {J.F. Silva Gomes and S.A. Meguid (editors), INEGI-FEUP},
	abstract = {The coflex Interlaminar Technology is an interlaminar stabilization device indicated for use in one or two level lumbar stenosis from L1-L5. It is used in skeletally mature patients with at least moderate impairment in function who experience relief in flexion from their symptoms of leg/buttocks/groin pain, with or without back pain, and who have undergone at least 6 months of non-operative treatment. Our study is focused on the evaluation and biomechanical analysis of osteosynthesis implants and in particular the Corflex-F implant to redefine a new approach to the "Coflex" interspinatus implant using particles swarm optimisation for additive manufacturing, then to study these biomechanical performances.},
	url = {https://paginas.fe.up.pt/~irf/Proceedings_IRF2020/data/papers/17493.pdf},
	author = {Ameddah, Hacene and Brioua, Mourad}
}
@proceedings {6996,
	title = {Optimal shape reproduction of an intervertebral prosthesis \&ldquo;COFLEX\&rdquo; for additive manufacturing},
	journal = {7th International Conference Integrity-Reliability-Failure. J.F. Silva Gomes and S.A. Meguid (editors), INEGI-FEUP (2020),},
	year = {2020},
	pages = {487-488},
	author = {Ameddah, Hacene and Brioua, Mourad}
}
@proceedings {6996,
	title = {Optimal shape reproduction of an intervertebral prosthesis \&ldquo;COFLEX\&rdquo; for additive manufacturing},
	journal = {7th International Conference Integrity-Reliability-Failure. J.F. Silva Gomes and S.A. Meguid (editors), INEGI-FEUP (2020), },
	year = {2020},
	pages = {487-488},
	author = {Ameddah, Hacene and Brioua, Mourad}
}
@proceedings {6991,
	title = {Improvement Inspection Method for Rapid Prototyping of an involute spur gears for an Additive Manufacturing process.},
	journal = {International Conference on 3D Printing and Additive Manufacturing November 23-24,   Webinar, From your imagination to a 3D model},
	year = {2020},
	address = {Dubai, UAE},
	author = {Selloum, Rabia and Ameddah, Hacene and Brioua, Mourad}
}
@proceedings {6990,
	title = {Non-Destructive Evaluation for an Exactitude Reproduction of Form by Reverse Engineering in an Additive Manufacturing Process.},
	journal = {ASTM International Conference on Additive Manufacturing ICAM2020, November 16-20, Webinar},
	year = {2020},
	author = {Selloum, Rabia and Ameddah, Hacene and Brioua, Mourad}
}
@proceedings {6987,
	title = {Comportement {\`a} la fatigue du stent biod{\'e}gradable : Cas de la diastole et de la systole},
	journal = {Congres Alg{\'e}rien de M{\'e}canique CAM2019 Ghardaia 23-26 F{\'e}vrier},
	year = {2020},
	author = {Ameddah, Hacene and Lounansa, Salim and Mazouz,  Hammoudi}
}
@proceedings {6986,
	title = {L\&rsquo;utilisation de la fabrication additive en ing{\'e}nierie tissulaire pour le cas d\&rsquo;une implantation tissulaire dans le d{\'e}faut osseux de la jambe},
	journal = {Congres Alg{\'e}rien de M{\'e}canique CAM2019 , 23-26 F{\'e}vrier },
	year = {2020},
	address = {Ghardaia, Alg{\'e}rie},
	author = {Ali-Alkebsi, Ebrahim-Ahmed and Ameddah, Hacene and Toufik Outtas}
}
@proceedings {6985,
	title = {Inspection sur une machine {\`a} mesurer tridimensionnelle en vue d\&rsquo;un tol{\'e}rancement d\&rsquo;un mod{\`e}le virtuel pour la fabrication additive,},
	journal = {Congres Alg{\'e}rien de M{\'e}canique CAM2019 Ghardaia 23-26 F{\'e}vrier },
	year = {2020},
	author = {Selloum, Rabia and Ameddah, Hacene and Brioua, Mourad}
}
@conference {6976,
	title = {Inspection on a Three-Dimensional Measuring Machine for a Virtual Model for Additive Manufacturing},
	booktitle = {International Conference on Advances in Mechanical Engineering and Mechanics},
	year = {2020},
	pages = { 138{\textendash}143},
	address = { Advances in Mechanical Engineering, Materials and Mechanics},
	abstract = {
	Today, and to quickly meet the high demands of variability, supply chain efficiency and energy optimization, business markets are looking for modern manufacturing technologies and as a solution, industry 4.0 is using the benefits of integrating modern manufacturing technologies and information systems to promote production capabilities. In this context, intelligent industry represents a new generation of automatic production systems based on the concepts of intelligent industry, intelligent manufacturing, control and intelligent inspection, such as inspection on coordinate measuring machines (CMMs). This technology allows many machines to be integrated into a plant and controlled online using the MBD (Model Based Design) quality system. The problem of conformity of parts with complex geometry is becoming more and more important. The objective of this work is to present a 3D inspection technique on a virtual model (MBD: Model Based Design), using a coordinate measuring machine equipped with a {\textquotedblleft}POWER INSPECT{\textquotedblright} measurement and inspection software. The interest of this technique is to show the impact of the dimensional inspection and geometric tolerance process of the CAD model for the CAI (Computer aided Inspection) approach on the fidelity of the finished product for additive manufacturing (AM) including intelligent industry.

},
	url = {https://link.springer.com/chapter/10.1007/978-3-030-52071-7_20},
	author = {Ameddah, Hacene and Selloum, Rabia and Brioua, Mourad}
}
@conference {6933,
	title = {OPTIMAL SHAPE REPRODUCTION OF AN INTERVERTEBRAL PROSTHESIS \&ldquo;COFLEX\&rdquo; FOR ADDITIVE MANUFACTURING},
	booktitle = {7th International Conference Integrity-Reliability-Failure},
	year = {2020},
	pages = {487-488},
	publisher = { J.F. Silva Gomes and S.A. Meguid (editors), INEGI-FEUP },
	organization = { J.F. Silva Gomes and S.A. Meguid (editors), INEGI-FEUP },
	abstract = {
	The coflex Interlaminar Technology is an interlaminar stabilization device indicated for use in one or two level lumbar stenosis from L1-L5. It is used in skeletally mature patients with at least moderate impairment in function who experience relief in flexion from their symptoms of leg/buttocks/groin pain, with or without back pain, and who have undergone at least 6 months of non-operative treatment. Our study is focused on the evaluation and biomechanical analysis of osteosynthesis implants and in particular the Corflex-F implant to redefine a new approach to the "Coflex" interspinatus implant using particles swarm optimisation for additive manufacturing, then to study these biomechanical performances.

},
	url = {https://paginas.fe.up.pt/~irf/Proceedings_IRF2020/data/papers/17493.pdf},
	author = {Ameddah, Hacene and Brioua, Mourad}
}
@proceedings {7002,
	title = {Minimisation des contraintes dans les proth{\`e}ses totales de genou},
	journal = { The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019) , April 10-11},
	year = {2019},
	address = {Oran, Algeria},
	author = {Mezach,  Fatima and Ameddah, Hacene and Mazouz,  Hammoudi}
}
@proceedings {7001,
	title = {Analysis of the shock absorber thickness on the rehabilitation of the fracture of liner on alumina in acetabular cup (Titanium - Alumina) in the total hip prosthesis},
	journal = {The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019) , April 10-11},
	year = {2019},
	address = {Oran, Algeria},
	author = {Bouakkar, Loubna and Ameddah, Hacene and Mazouz,  Hammoudi}
}
@proceedings {7000,
	title = {Numerical Study of the Behavior of Biomimetic Prosthesis \&ldquo;Case of the M6-C Prosthesis with Viscoelastic Core\&rdquo;},
	journal = { The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11,},
	year = {2019},
	address = {Oran, Algeria},
	author = {Amadji,   Moussa and Ameddah, Hacene and Mazouz,  Hammoudi}
}
@proceedings {6999,
	title = {Etude Num{\'e}rique du Comportement des Endoproth{\`e}ses Cardiovasculaires (Cas de Stent Biod{\'e}gradable)},
	journal = { The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11},
	year = {2019},
	address = {Oran, Algeria},
	author = {Ameddah, Hacene and Lounansa, Salim and Amadji,   Moussa and Mazouz,  Hammoudi}
}
@proceedings {6998,
	title = {Electromechanical Analysis (MEMS) of a Capacitive Pressure Sensor of a Neuromate Robot Probe  },
	journal = {The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11,},
	year = {2019},
	address = {Oran, Algeria},
	author = {Ameddah, Hacene and Bettine, Farida and Mazouz,  Hammoudi}
}
@proceedings {6997,
	title = {Traitement d\&rsquo;Images M{\'e}dicales et D{\'e}tection de Contours d\&rsquo;Images Echographiques pour la Reconstruction 3D},
	journal = {The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11},
	year = {2019},
	address = {Oran, Algeria},
	author = {Ameddah, Hacene and Mebarki,  Ghazali and Mazouz,  Hammoudi}
}
@proceedings {6989,
	title = {The effect of the cutting conditions parameters on temperature by the Taguchi optimization method  },
	journal = {The 7th International Conference on Advances in Mechanical Engineering and Mechanics ICAMEM 2019 Hammamet - December 16-18,},
	year = {2019},
	address = {Hammamet, Tunisia},
	author = {Mebrek, Hamama and Ameddah, Hacene and Mansouri, Salah}
}
@proceedings {6988,
	title = {Finite element analysis of fatigue behavior of the biodegradable stent},
	journal = {The 7th International Conference on Advances in Mechanical Engineering and Mechanics ICAMEM 2019 Hammamet - 16-18, },
	year = {2019},
	address = {Hammamet, Tunisia},
	author = {Ameddah, Hacene and Lounansa, Salim and Mazouz,  Hammoudi}
}
@inbook {6982,
	title = {3D Printing Analysis by Powder Bed Printer (PBP) of a Thoracic Aorta Under Simufact Additive},
	booktitle = {Additive Manufacturing Technologies From an Optimization Perspective},
	year = {2019},
	abstract = {
	In recent decades, vascular surgery has seen the arrival of endovascular techniques for the treatment of vascular diseases such as aortic diseases (aneurysms, dissections, and atherosclerosis). The 3D printing process by addition of material gives an effector of choice to the digital chain, opening the way to the manufacture of shapes and complex geometries, impossible to achieve before with conventional methods. This chapter focuses on the bio-design study of the thoracic aorta in adults. A bio-design protocol was established based on medical imaging, extraction of the shape, and finally, the 3D modeling of the aorta; secondly, a bio-printing method based on 3D printing that could serve as regenerative medicine has been proposed. A simulation of the bio-printing process was carried out under the software Simufact Additive whose purpose is to predict the distortion and residual stress of the printed model. The binder injection printing technique in a Powder Bed Printer (PBP) bed is used. The results obtained are very acceptable compared with the results of the error elements found.

},
	author = {Ameddah, Hacene and Mazouz,  Hammoudi}
}
@article {6972,
	title = {NUMERICAL STUDY OF THE BIOMIMETIC M6-C PROSTHESIS WITH VISCOELASTIC CORE},
	journal = {U.P.B. Sci. Bull., Series D},
	volume = {81},
	number = {4},
	year = {2019},
	abstract = {
	In this work we present a new biomimetic disc prosthesis imitating the fibroreinforced osmotic, and viscoelastic properties of the biological intervertebral disc (BID). For this, we proposed to study the second-generation biomimetic prosthesis "the M6-C prosthesis" which contains two metal plates, a core and a fiber fabric. First, a 3D model was established, the finite element analysis (FEA) under the ANSYS{\textcopyright}2015 was conducted. Secondly, a biomimetic material, the silicone rubber, was compared with the polyethylene to find the material that mimics the behavior of a biological disk. Finally, the analysis of the results found the polymer has the same mechanical properties as the nucleus pulposus, in particular the viscoelastic behaviour compared with that of polyethylene

},
	url = {https://www.scientificbulletin.upb.ro/rev_docs_arhiva/full524_939736.pdf},
	author = {Amadji,   Moussa and Ameddah, Hacene and Mazouz,  Hammoudi}
}
@proceedings {6958,
	title = {The effect of the cutting conditions parameters on the temperature by the Taguchi optimization method},
	journal = {The 7eme International Conference on Advances in Mechanical Engineering and Mechanics ICAMEM 2019, December 16-18},
	year = {2019},
	address = { Hammamet, Tunisia},
	author = {Mebrek, Hamama and Ameddah, Hacene and Mansouri, Salah}
}
@proceedings {6995,
	title = {Biomedical rapid prototyping of free_form surfaces By planar contours method},
	journal = {6th International Conference on INTEGRITY-RELIABILITY-FAILURE, 22-26 July},
	year = {2018},
	address = {Lisbon, Portugal},
	author = {Ameddah, Hacene and Mazouz,  Hammoudi}
}
@proceedings {6984,
	title = {IN VIVO CHARACTERIZATION OF MICRO ARCHITECTURE OF A HUMAN VERTEBRA BY MICRO-IMAGING},
	journal = { 6th International Conference Integrity-Reliability-Failure 22-26 July},
	year = {2018},
	address = { Lisbon, Portugal },
	abstract = {
	Bone, like any other material, is subject to mechanical fatigue when subjected to repetitive cyclic loading. Cyclic loading in vivo occurs either in workplaces exposed to mechanical vibration or during handling operations or during leisure and sports activities. As an example, the continuous exposure of the human body to intense global vibration can be, in the long run, cause problems of lumbar lesions due to dynamic stresses (mainly compression) in the spine. Bone and microcracks in cancellous bone. Fatigue rupture of vertebral bone is clinically and biologically important. From a clinical point of view, permanent damage and deformity, under cyclic loading, can probably weaken the vertebral body by inducing the migration of joint replacements. The mechanism of fatigue damage in cortical and trabecular bone can cause cracks and their propagation to final rupture. Microcracks observed in the vertebrae contributed to the decrease in vertebral rupture strength. In order to analyze the biomechanical behavior of the vertebrae and to assess the risk of fracture, an in vivo characterization method is applied based on the micro-MRI, aiming to focus on the evaluation the force at rupture of the vertebral body in compression. The method of extracting the shape of cancellous bone by special filters (adaptive filter, Robert{\textquoteright}s filter, etc.) will be applied, allowing it to be modelled as a slice (2D). This micro slice are created by edge configuration generation and triangulated cube configuration generation in capturing section contour points from medical image per slice, creating B-spline curve with the control points in each layer, producing solid model construction in Planar Contours method. Medical rapid prototyping models are performed in SolidWorks. Layered manufacturing techniques are used for producing parts of arbitrary complexity, which will then be modelled by finite element in fatigue.

},
	url = {https://paginas.fe.up.pt/~irf/Proceedings_IRF2018/data/papers/7267.pdf},
	author = {Ameddah, Hacene and Mazouz,  Hammoudi}
}
@proceedings {6983,
	title = {BIOMEDICAL RAPID PROTOTYPING OF FREE-FORM SURFACES BY PLANAR CONTOURS METHOD},
	journal = {6th International Conference Integrity-Reliability-Failure , 22-26 July },
	year = {2018},
	address = { Lisbon, Portugal },
	abstract = {
	In this paper, an interactive application tool has been developed for creating 3D models of dental implants and other body structures from 2D medical imaging data. 3D models are generated by using reverse engineering algorithm and planar contour method by SolidWorks developed in Visual Basic Language. The research includes transferring Computed Tomography (CT) and Magnetic Resonance Imaging (MRI) images into digital matrixes, entering digital matrixes into SolidWorks environment, building feature library for 3D reconstruction, creating medical rapid prototyping models, and performing biomedical rapid design and manufacturing. 3D reconstruction models is created by edge configuration, generation and triangulated cube configuration generation in capturing section contour points from medical image per slice, creating B-spline curve with the control points in each layer, producing solid model construction in planar contours method. Medical rapid prototyping models are performed in SolidWorks, including three views or any combination of views, for biomedical rapid designing and manufacturing according to the biomedical needs. Layered manufacturing techniques are used for producing parts of arbitrary complexity. The results of this paper are to develop image processing 3D visualization in SolidWorks Application Programming Interface (API) using Visual Basic Language. The system performance is tested using truth CT and or MRI data, and 3D physical models dental for MRP are created directly from SolidWorks. The results reveal that the accuracy of 3D reconstruction is acceptable.

},
	url = {https://paginas.fe.up.pt/~irf/Proceedings_IRF2018/data/papers/7315.pdf},
	author = {Ameddah, Hacene and Mazouz,  Hammoudi}
}
@article {6975,
	title = {A NEURAL NETWORK APPROACH FOR PREDICTING KINEMATIC ERRORS SOLUTIONS FOR TROCHOIDAL MACHINING},
	journal = {International Journal of Modern Manufacturing Technologies},
	volume = {x},
	number = {1},
	year = {2018},
	abstract = {
	The prediction of machining accuracy of a fiveaxis machine tool is a vital process in precision manufacturing for machining a hard and free form surfaces. This work presents a novel approach for predicting kinematic errors solutions in five-axis machine for trochoidal milling strategy. This approach is based on Artificial Neural Network (ANN) for trochoidal milling machining strategy. We proposed a multi-layer perceptron (MLP) model to find the inverse kinematics solution for a five-axis machine. The data sets for the neural-network model are obtained using kinematics software. The solution of each neural network is estimated using inverse kinematics equation of the machine tool to select the best one. As a result, the Neural Network implementation improves the performance of the learning process. For this, numerical study of trochoidal strategy and experimental results are presented with aims to full milling and to ensure a control of radial engagement. The experimental result shows the efficiency of the method by obtainning the toolpath and the machining possebility of this new type of strategy emerging.

},
	url = {https://ijmmt.ro/vol10no12018/02_Beettine_Farid.pdf},
	author = {Bettine, Farida and Ameddah, Hacene and Manaa, Rabah}
}
@article {6974,
	title = {A neural network approach for predicting kinematic errors solutions for trochoidal machining in the matsuura MX-330 Five-axis Machine},
	journal = {FME Transactions },
	volume = {46},
	number = {4},
	year = {2018},
	pages = {453-462},
	abstract = {
	The prediction of machining accuracy of a Five-axis Machine tool is a vital process in precision manufacturing. This work presents a novel approach for predicting kinematic errors solutions in five axis Machine. This approach is based on Artificial Neural Network (ANN) for trochoidal milling machining strategy. We proposed a multi-layer perceptron (MLP) model to find the inverse kinematics solution for a Five-axis Machine Matsuura MX-330. The data sets for the neural-network model is obtained using Matsuura MX-330 kinematics software. The solution of each neural network is estimated using inverse kinematics equation of the Machine tool to select the best one. As a result, the Neural Network implementation improves the performance of the learning process. In this work trochoidal trajectory generation formulation has been developed and simulated using the software Matlab Inc. The main advantage of the trochoidal path is to present a continuous path radius leading the machining process to take place under favorable conditions (no impact, less marking of the part, ...). Obtaining the toolpath is to allow programming of the toolpath according to ISO 6983 (which defines the principles of the G code). For this, numerical study of trochoidal strategy and experimental result are presented with aims to full milling and to ensure a control of radial engagement.

},
	url = {https://scindeks.ceon.rs/Article.aspx?artid=1451-20921804453B\&lang=en},
	author = {Bettine, Farida and Ameddah, Hacene and Manaa, Rabah}
}
@article {6973,
	title = {Biomechanical Analysis of Fatigue Behavior of a Fully Composite-based Designed Hip Resurfacing Prosthesis},
	journal = {Journal of the Serbian Society for Computational Mechanics},
	volume = {12},
	number = {2},
	year = {2018},
	pages = {80-94},
	abstract = {
	The Hip resurfacing prosthesis is subjected to different stresses resulting from the different positions of the human walk, thereby generating dynamic stresses that vary with time, leading the implant material to fatigue failure. It is important to study the fatigue behavior of the prosthesis material and to ensure its long lifetime. We proposed a new composite material named CF/PA12 composed of carbon fibers with a polyamide 12 resin, whose biocompatibility had been demonstrated in laboratories. In this study, we investigated the static and dynamic behavior at different Gait cycle positions of a Hip resurfacing prosthesis entirely made of new CF/PA12 composite. A fatigue behavior will be deducted by a Finite Element Analysis using the commercial SolidWorks software compatible with the Abaqus finite element code. Static and dynamic analysis were conducted considering normal walking and climbing stairs loading at different Gait cycle percentages of 2, 13, 19, 50 and 63\%. The results obtained showed that Hip resurfacing prosthesis fully made of new CF/PA12 composite was very far from fatigue and therefore from failure.

},
	url = {http://www.sscm.kg.ac.rs/jsscm/downloads/Vol12No2/Vol12No2_06.pdf},
	author = {Chergui, Karima and Ameddah, Hacene and Mazouz,  Hammoudi}
}
@article {6971,
	title = {Numerical Shape Optimization of Cervical Spine Disc Prosthesis Prodisc-C},
	journal = { Journal of Biomimetics, Biomaterials and Biomedical Engineering},
	volume = {36},
	year = {2018},
	pages = {56-69},
	abstract = {
	Various ball and socket-type designs of cervical artificial discs are in use or under investigation. All these disc designs claim to restore the normal kinematics of the cervical spine. In this study, we are interested in the cervical prosthesis, which concerns the most sensitive part of the human body, given the movements generated by the head. The goal of this work is to minimize the constraints by numerical shape optimization in the prodisc-C cervical spine prosthesis in order to improve performance and bio-functionality as well as patient relief. Prodisc-C cervical spine prosthesis consists of two cobalt chromium alloy plates and a fixed nucleus. Ultra-high molecular weight polyethylene, on each plate there is a keel to stabilize the prosthesis; this prosthesis allows thee degrees of freedom in rotation. To achieve this goal, a static study was carried out to determine the constraint concentrations on the different components of the prosthesis. Based on the biomechanical behaviour of the spine discs, we totally fixed the lower metal plate; a vertical load of 73.6 N to simulate the weight of the head was applied to the superior metallic endplate. After a static study on this prosthesis, using a finite element model, we noticed that the concentration of the Von-Mises stress is concentrated on the peripheral edge core and the concave articulating surface of the superior metallic endplate the numerical. We use the module optimization for 3D SolidWorks for optimize our design, based on the criteria of minimizing stress value. Shape optimization concluded to minimize the equivalent stress value on both joint surface (concave and convex) from 11.3 MPa to 9.1MPa corresponding to a percentage decrease of 19.4\% from the original geometry. We conclude that despite the fact that maximum Von Mises stresses are higher in the case of the dynamic load, remains that they are weak. Which is an advantage for the durability of the prosthesis and-also for the bone, because a low stress concentration on the prosthesis will reduce stress concentration generated by the implant on the bone, therefore its risk of fracture reduces.

},
	url = {https://www.scientific.net/JBBBE.36.56},
	author = {Amadji,   Moussa and Ameddah, Hacene and Mazouz,  Hammoudi}
}
@proceedings {6960,
	title = {Etude num{\'e}rique de l\&rsquo;usinage en traisage d\&rsquo;alliage de titane Ti-6Al-4V},
	journal = {2{\`e}me WORKSHOP INTERNATIONAL en MECANIQUE des STRUCTURE et MATERIAUX IWMSM 2018, du 17-18 D{\'e}cembre},
	year = {2018},
	address = {Batna, Alg{\'e}rie},
	author = {Klaa, Eftikhar and Ameddah, Hacene and Mansouri, Salah}
}
