@article {6954,
	title = {Anisotropic and Isotropic Elasticity Applied for the Study of Elastic Fields Generated by Interfacial Dislocations in a Heterostructure of InAs/(001)GaAs Semiconductors},
	journal = {Journal of Solid Mechanics},
	volume = {13},
	number = {4},
	year = {2021},
	pages = {503-512},
	abstract = {
	This work is a study of the elastic fields{\textquoteright} effect (stresses and displacements) caused by dislocations networks at a heterostructure interface of a InAs / GaAs semiconductors thin system in the cases of isotropic and anisotropic elasticity. The numerical study of this type of heterostructure aims to predict the behavior of the interface with respect to these elastic fields satisfying the boundary conditions. The method used is based on a development in Fourier series. The deformation near the dislocation is greater than the other locations far from the dislocation.\&nbsp;\&nbsp;\&nbsp;\&nbsp;\&nbsp;

},
	url = {https://jsm.arak.iau.ir/article_682342.html},
	author = {Mekhloufi, Rafik and Boussaha, Ahmed and Benbouta, Rachid and Baroura, Lazhar}
}
@article {3769,
	title = {Chip Formation Process using Finite Element Simulation \&ldquo;Influence of Cutting Speed Variation\&rdquo;},
	journal = {Journal of Solid Mechanics},
	volume = {11},
	number = {4},
	year = {2019},
	pages = {854-861},
	publisher = {Islamic Azad University Arak Branch},
	isbn = {2008-3505},
	url = {http://jsm.iau-arak.ac.ir/article_668618_1132799.html},
	author = {Kherraf, A and Tamerabet, Y and Brioua, Mourad and Benbouta, Rachid}
}
@article {6957,
	title = {Processing and Characterization of a Copper Based Binary Alloy Achieved by Solid Phase Compaction and Sintering},
	journal = { International Journal of Engineering Research in Africa},
	volume = {38},
	year = {2018},
	pages = { 1-8},
	abstract = {
	In the present work, (Cu-Sn, Cu-Co) based alloys with different compositions have been obtained by using powder metallurgy (PM). These alloys were created with the purpose of increasing mechanical and structural properties of the industrial parts. The compacts are made according to the sintering manufacturing method, the uniaxial compressed cold samples. Metallographic characterizations, hardness and density measurements were carried out in order to study the influence of the addition of tin and cobalt, the variation of the compaction pressure and the sintering temperature on the finishing product. It has been proved that the addition of tin and cobalt to a copper powder mixture increase the properties of the sintered parts.

},
	url = {https://www.scientific.net/JERA.38.1},
	author = {Arar, Karim and Mansouri, Salah and Benbouta, Rachid and Fedaoui, Kamel}
}
@article {3811,
	title = {A Contact Problem of an Elastic Layer Compressed by Two Punches of Different Radii},
	journal = {Journal of Solid Mechanics},
	volume = {10},
	number = {3},
	year = {2018},
	pages = {571-580},
	publisher = {Islamic Azad University Arak Branch},
	isbn = {2008-3505},
	author = {Seghir, Kamel and Bendaoui, M and Benbouta, Rachid}
}
@article {3783,
	title = {Determination of Probabilistic Characteristics During Isolation of Fragile Loads Carried in Motor Trucks Over Rough Roads.},
	journal = {International Journal of Acoustics \& Vibration},
	volume = {23},
	number = {3},
	year = {2018},
	isbn = {1027-5851},
	author = {Seghir, Kamel and Benbouta, Rachid and Naoun, Mehieddine}
}
@proceedings {3779,
	title = {Processing and Characterization of a Copper Based Binary Alloy Achieved by Solid Phase Compaction and Sintering},
	journal = {International Journal of Engineering Research in Africa},
	volume = {38},
	year = {2018},
	pages = {1-8},
	publisher = {Trans Tech Publ},
	isbn = {3035715092},
	url = {https://www.scientific.net/JERA.38.1},
	author = {Arar, Karim and Mansouri, Salah and Benbouta, Rachid and Fedaoui, Kamel}
}
@article {3772,
	title = {The effect of the elastic fields caused by a networks of dislocations placed at interfaces of a three-layer material Cu/Cu/(001) Fe in the case of anisotropic elasticity},
	journal = {Arabian Journal for Science and Engineering},
	volume = {41},
	number = {5},
	year = {2016},
	pages = {1955-1960},
	publisher = {Springer},
	isbn = {1319-8025},
	url = {https://link.springer.com/article/10.1007/s13369-016-2054-1},
	author = {Makhloufi, Rafik and Brioua, Mourad and Benbouta, Rachid}
}
@article {3782,
	title = {CHARACTERIZATION AND RESISTANCE TO CORROSION OF COATED PARTS MADE OF STEEL},
	year = {2006},
	url = {http://www.arpnjournals.org/jeas/research_papers/rp_2016/jeas_0316_3948.pdf},
	author = {Hamada, A and Mihi, Abdelkader and SAMIR RAHAL and Benbouta, Rachid}
}
