@mastersthesis {6175,
	title = {Analyse d\&$\#$39;un syst{\`e}me job shop: aspect ordonnancement},
	year = {2016},
	author = {Driss Imen}
}
@mastersthesis {6173,
	title = {Optimisation des fonctions int{\'e}gr{\'e}es de production, de stockage et de distribution dans une chaine logistique},
	year = {2016},
	author = {Senoussi Ahmed}
}
@mastersthesis {6172,
	title = {{\'E}tude, mise en {\oe}uvre et adaptabilit{\'e} des outils de l\&rsquo;am{\'e}lioration continue dans une industrie alg{\'e}rienne : Approches Th{\'e}orique et Pratique},
	year = {2016},
	author = {Aoueg Hichem}
}
@mastersthesis {6171,
	title = {Mod{\'e}lisation de l\&$\#$39;{\'e}tat d\&$\#$39;un syst{\`e}me de production sur la base d\&$\#$39;une approche Bayesienne, Etude de cas: Entreprise Cotitex Batna},
	year = {2016},
	author = {Salima Zeghdani}
}
@mastersthesis {6170,
	title = {Utilisation d\&rsquo;une heuristique bas{\'e}e sur la recherche Tabou pour r{\'e}soudre le probl{\`e}me d\&rsquo;int{\'e}gration Production distribution},
	year = {2016},
	author = {Boutarfa Youcef}
}
@mastersthesis {6169,
	title = {Planification Int{\'e}gr{\'e}e de la production et de la distribution avec v{\'e}hicules pleins (Full truckload)},
	year = {2016},
	author = {Mammeri Walid}
}
@mastersthesis {6168,
	title = {Etude de la surveillabilit{\'e} d\&$\#$39;un syst{\`e}me},
	year = {2016},
	author = {Bouali Ikram and Benderraji  Ibtissem}
}
@mastersthesis {6167,
	title = {Maitrise du logiciel ARENA},
	year = {2016},
	author = {Boumedjane Wassim and Oudjhih Youcef}
}
@mastersthesis {6166,
	title = {l\&rsquo;int{\'e}gration du risque dans la planification de la production et gestion des op{\'e}rations},
	year = {2016},
	author = {Bezgrari Fairouz and Louanas Nedjma}
}
@mastersthesis {6165,
	title = {Contr{\^o}le statistique d\&$\#$39;un processus Six Sigma},
	year = {2016},
	author = {Helissi Billel and Bounecer Issam}
}
@mastersthesis {6093,
	title = {Etude de la surveillabilit{\'e} d\&rsquo;un syst{\`e}me},
	year = {2016},
	author = {Benderradji Ibtissem and Bouali Ikram}
}
@mastersthesis {6092,
	title = {Etude et am{\'e}lioration de l\&rsquo;algorithme de localisation DV-HOP dans un r{\'e}seau de capteur sans fil},
	year = {2016},
	author = {Belhadj Amina}
}
@mastersthesis {6091,
	title = {Mod{\`e}le math{\'e}matique et m{\'e}thaheuristique pour la r{\'e}solution d\&rsquo;un probl{\`e}me de lot sizing avec stock de s{\'e}curit{\'e}},
	year = {2016},
	author = {Messaoudi Bessam and Boutelis Taquiedinne}
}
@mastersthesis {6090,
	title = {Contr{\^o}le statistique d\&rsquo;un processus six sigma},
	year = {2016},
	author = {Bounecer Issame and Hellissi Billel}
}
@mastersthesis {6089,
	title = {Application des m{\'e}thodes et outils de pr{\'e}vision dans une situation incertaine : application {\`a} l\&rsquo;entreprise TRIFISOUD},
	year = {2016},
	author = {Djoumati Fouad and Sahraoui Rami}
}
@mastersthesis {6088,
	title = {Evaluation de la qualit{\'e} d\&$\#$39;un processus de conception par l\&rsquo;approche DFSS (Design For Six Sigma)},
	year = {2016},
	author = {Boukhenifra Aissa and Ghecham Karim}
}
@mastersthesis {6087,
	title = {La classification multicrit{\`e}re des perturbations par la m{\'e}thode AHP floue et la r{\'e}alisation d\&rsquo;une plate forme informatique},
	year = {2016},
	author = {Abdessemad Houria and Chaabane Hasma}
}
@mastersthesis {6086,
	title = {L\&rsquo;int{\'e}gration des approches AHP floue et MOORA floue dans les probl{\`e}mes de choix Application : Choix d\&rsquo;un site industriel au sein de la wilaya de Batna},
	year = {2016},
	author = {Boukricha Im{\`e}ne and Djari Nour-El-Im{\`e}ne}
}
@mastersthesis {6085,
	title = {Le Choix d\&rsquo;un Site Industriel Par La M{\'e}thode AHP floue et la r{\'e}alisation d\&rsquo;une plate Forme Informatique},
	year = {2016},
	author = {Khenatela Hassina and Kouda Imene}
}
@mastersthesis {6084,
	title = {R{\'e}solution des probl{\`e}mes de s{\'e}lection par les m{\'e}thodes multicrit{\`e}re dans un environnement flou et r{\'e}alisation d\&rsquo;une plateforme informatique},
	year = {2016},
	author = {Rebouh Nouha-rayane and Saidi Hadjer}
}
@mastersthesis {6081,
	title = {D{\'e}veloppent d\&$\#$39;une application de gestion du service Hospitalisation {\`a} Domicile (HAD) CHU Batna},
	year = {2016},
	author = {Belazoui Hayet}
}
@mastersthesis {6080,
	title = {Utilisation des outils LEAN dans la gestion des projets},
	year = {2016},
	author = {Meguellati Hocine and Bellachache Fares}
}
@mastersthesis {6079,
	title = {Evaluation des risques par la m{\'e}thode AHP Floue  -{\'e}tude de cas FILBA du textile},
	year = {2016},
	author = {Djehichi Samira}
}
@mastersthesis {6078,
	title = {Evaluation de la performance d\&rsquo;un syst{\`e}me de production bas{\'e} sur la valeur du risque.},
	year = {2016},
	author = {Benfifi Hassen}
}
@mastersthesis {6077,
	title = {Planification mixte production interne/sous-traitance dans une approche de maintenance int{\'e}gr{\'e}e.},
	year = {2016},
	author = {Bourouba Amor}
}
@book {6069,
	title = {La s{\'e}curit{\'e} sanitaire en {\'e}tablissements de sant{\'e}, ISBN-10 : 9783841672919 / ISBN-13 : 978-3841672919},
	year = {2016},
	pages = {236 pages},
	publisher = { {\'E}ditions universitaires europ{\'e}ennes },
	organization = { {\'E}ditions universitaires europ{\'e}ennes },
	abstract = {La maitrise des risques sanitaires est un souci majeur et permanent dans les {\'e}tablissements de sant{\'e}. L{\textquoteright}infection associ{\'e}e aux activit{\'e}s de soins est une cause majeure de morbidit{\'e} et de mortalit{\'e} dans ces {\'e}tablissements. Chez l{\textquoteright}insuffisant r{\'e}nal dialys{\'e}, elle serait responsable de l{\textquoteright}ordre de 15 \% des d{\'e}c{\`e}s. Afin de r{\'e}pondre {\`a} cet enjeu, les {\'e}tablissements de sant{\'e} utilisent une d{\'e}marche qui repose essentiellement sur les pratiques de l{\textquoteright}analyse des risques qui entre dans le cadre d{\textquoteright}une analyse plus globale de gestion des risques. Ces pratiques sont fond{\'e}es sur le principe d{\textquoteright}anticipation, bas{\'e} sur l{\textquoteright}identification et le traitement des risques possibles. Dans ce cas, il est pratiquement impossible de garantir l{\textquoteright}exhaustivit{\'e} des situations {\`a} risques, de m{\^e}me il est impossible d{\textquoteright}abandonner {\`a} l{\textquoteright}heure actuelle ces pratiques. C{\textquoteright}est pourquoi, pour une meilleure maitrise de ce type de risques, il est n{\'e}cessaire de consolider d{\textquoteright}avantage cette d{\'e}marche pr{\'e}ventive et minimiser ainsi les risques r{\'e}siduels. A cet effet une approche est propos{\'e}e, bas{\'e}e sur une strat{\'e}gie de pr{\'e}vention primaire continue, support{\'e}e par des m{\'e}canismes de contr{\^o}le et de surveillance des risques critiques.},
	url = {https://www.amazon.fr/s\%C3\%A9curit\%C3\%A9-sanitaire-\%C3\%A9tablissements-sant\%C3\%A9/dp/3841672914},
	author = {Benzouai Messaoud and Smadi Hacene}
}
@mastersthesis {6058,
	title = {Analyse des indicateurs n{\'e}cessaires au processus d\&rsquo;{\'e}valuation du software pour l\&rsquo;am{\'e}lioration de la qualit{\'e} du logiciel: Logiciel de gestion de l\&rsquo;{\'e}tat civil},
	year = {2016},
	author = {Ourlis Lazhar}
}
@mastersthesis {6047,
	title = {Int{\'e}gration et informatisation d\&rsquo;un syst{\`e}me HACCP dans un syst{\`e}me de management de la s{\'e}curit{\'e} des denr{\'e}es alimentaires (ISO 22000): Etude de cas\&raquo;},
	year = {2016},
	author = {Taouririt Kamel}
}
@mastersthesis {6046,
	title = {Mesure du capital intellectuel d\&rsquo;un syst{\`e}me de production},
	year = {2016},
	author = {Brahmi Samira}
}
@mastersthesis {6005,
	title = {Contr{\^o}le statistique d\&rsquo;un processus six sigma, Option},
	year = {2016},
	author = {Bounecer Issame and Hellissi Billel}
}
@mastersthesis {6004,
	title = {Application des m{\'e}thodes et outils de pr{\'e}vision dans une situation incertaine : application {\`a} l\&rsquo;entreprise TRIFISOUD, Master en G{\'e}nie Industriel},
	year = {2016},
	author = {Djoumati Fouad and Sahraoui Rami}
}
@mastersthesis {6003,
	title = {Evaluation de la qualit{\'e} d\&$\#$39;un processus de conception par l\&rsquo;approche DFSS (Design For Six Sigma)},
	year = {2016},
	author = {Boukhenifra Aissa and Ghecham Karim}
}
@mastersthesis {5967,
	title = {Optimisation de la maintenance centr{\'e}e sur la fiabilit{\'e}},
	year = {2016},
	author = {Saidi Ahlem and Megri Soumia}
}
@mastersthesis {5966,
	title = {Calcul des aspects FMD d\&$\#$39;une chaine de production compos{\'e}e},
	year = {2016},
	author = {Halkoum Selma and Ghenai Hind}
}
@mastersthesis {5965,
	title = {Planification des travaux de maintenance},
	year = {2016},
	author = {Omeiri Fatima and Khenatela Hadjer}
}
@mastersthesis {5964,
	title = {D{\'e}veloppement d\&$\#$39;une application de Gestion de la Maintenance Assist{\'e}e par Ordinateur},
	year = {2016},
	author = {Farah Hani}
}
@mastersthesis {5963,
	title = {Syst{\`e}me {\`a} Base de Connaissances pour la Supervision d\&rsquo;un Syst{\`e}me Industriel},
	year = {2016},
	author = {DAhmani Chahinez and Kebi Samia}
}
@mastersthesis {5962,
	title = {Conception d\&rsquo;une interface graphique pour la surveillance d\&rsquo;un syst{\`e}me industriel},
	year = {2016},
	author = {Fatah Imene}
}
@mastersthesis {5961,
	title = {Evitement d\&rsquo;obstacles par un robot},
	year = {2016},
	author = {Batache EL-Djemai and Bouhentala Houssem-Eddine}
}
@mastersthesis {5960,
	title = {Analyse de la fiabilit{\'e} par les lois probabilistes},
	year = {2016},
	author = {Boumella Houssem-Eddine}
}
@mastersthesis {5939,
	title = {Mesure du Capital Intellectuel d\&rsquo;un syst{\`e}me de Production},
	year = {2016},
	author = {Brahimi Samia}
}
@mastersthesis {5934,
	title = {Proposition d\&rsquo;un syst{\`e}me de supervision industrielle : Approche Intelligence Artificielle},
	year = {2016},
	author = {Bouhafna Khetreddine}
}
@mastersthesis {5933,
	title = {Diagnostic des pannes bas{\'e} sur une approche bayesienne},
	year = {2016},
	author = {Mammeri Walid}
}
@mastersthesis {5932,
	title = {Optimisation des Mesures de la s{\^u}ret{\'e} de Fonctionnement au niveau de l\&rsquo;ON Batna},
	year = {2016},
	author = {Noune Med-Said}
}
@mastersthesis {5860,
	title = {Impact du diagnostic sur la performance d\&$\#$39;un syst{\`e}me logistique : cas pratique},
	year = {2016},
	author = {Aksa Abdeljalil and Oulmi Sami}
}
@mastersthesis {5859,
	title = {{\'E}tude m{\'e}thodologique de syst{\`e}me H-M dans un processus industriel : {\'e}tude de cas \&quot;Entreprise SARL BENPLK  Batna},
	year = {2016},
	author = {Dendouga  Ibtissem}
}
@mastersthesis {5858,
	title = {Approche m{\'e}thodologique de diagnostic d\&$\#$39;un syst{\`e}me industriel},
	year = {2016},
	author = {Laggoune Serhane}
}
@mastersthesis {5857,
	title = {Syst{\`e}me {\`a} Base de Connaissances pour la Supervision d\&rsquo;un Syst{\`e}me Industriel},
	year = {2016},
	author = {Dahmanli Chahinez and Kebi Samia}
}
@mastersthesis {5856,
	title = {conception d\&rsquo;une interface graphique pour la surveillance d\&rsquo;un syst{\`e}me industriel},
	year = {2016},
	author = {Farah Imene}
}
@mastersthesis {5855,
	title = {Am{\'e}lioration des performances d\&rsquo;une chaine logistique par l\&rsquo;utilisation de l\&rsquo;approche benchmarking \&laquo; {\'e}tude pratique chark pharme et mac-pharme \&raquo;},
	year = {2016},
	author = {Zerguine Lilia and Mahar Zohra}
}
@mastersthesis {5854,
	title = {Am{\'e}lioration de la s{\'e}lection des fournisseurs dans le secteur hospitali{\`e}re par la m{\'e}thode AHP},
	year = {2016},
	author = {Dalale Mohra and Laidoune Laidoune}
}
@mastersthesis {5853,
	title = {Transfert du contr{\^o}le anti-incendie des b{\^a}timents duTrain 1 au champ BRN vers un automate de s{\'e}curit{\'e} TRICONEX V9},
	year = {2016},
	author = {Benidir Abderrazak}
}
@mastersthesis {5852,
	title = {Etude d\&rsquo;un R{\'e}seau Local Industriel sans fil Wireless HART},
	year = {2016},
	author = {Messaoudi Mohamed and Benkhemiss Yasser Benkhemis}
}
@mastersthesis {5851,
	title = {Conception et r{\'e}alisation d\&rsquo;une application GMAO au profit de l\&rsquo;Agence Commerciale des T{\'e}l{\'e}coms (ACTEL) de Batna},
	year = {2016},
	author = {Benflis Fatima and Louai  Wissam}
}
@mastersthesis {5850,
	title = {Mise en {\oe}uvre d\&$\#$39;une m{\'e}thode d\&rsquo;ordonnancement multi-objectif d\&$\#$39;ateliers agroalimentaires},
	year = {2016},
	author = {Sqhli Amel and Benyamina Sara}
}
@mastersthesis {5849,
	title = {Design and implementation of text summarization},
	year = {2016},
	author = {Yaha Asma}
}
@mastersthesis {5810,
	title = {Conception d\&rsquo;un syst{\`e}me expert pour la d{\'e}tection en temps r{\'e}el des fautes d\&$\#$39;un syst{\`e}me de compression de gaz},
	year = {2016},
	author = {Chabbi Abdeldjalil}
}
@mastersthesis {5809,
	title = {Syst{\`e}me Intelligent d\&rsquo;aide a la d{\'e}cision pour le pilotage d\&rsquo;un processus de forage p{\'e}trolier},
	year = {2016},
	author = {Rezki Djamil}
}
@mastersthesis {5798,
	title = {Etude comparative des heuristiques d\&$\#$39;ordonnancement d\&$\#$39;atelier Flow Shop de permutation},
	year = {2016},
	author = {Haidoussi Imen}
}
@mastersthesis {5797,
	title = {Contribution {\`a} l\&$\#$39;ordonnancement Juste-{\`a}-temps des machines parall{\`e}les {\`a} l\&$\#$39;aide des algorithmes {\'e}volutionnaires},
	year = {2016},
	author = {Djebaili Nassima}
}
@mastersthesis {5796,
	title = {Base de connaissances pour la mod{\'e}lisation d\&$\#$39;un syst{\`e}me industriel},
	year = {2016},
	author = {Kebi Samia and DAhmani Chahinez}
}
@mastersthesis {5787,
	title = {Optimisation d\&$\#$39;une chaine d\&$\#$39;assemblage flexible {\`a} l\&$\#$39;aide des colonies de fourmis},
	year = {2016},
	author = {Djabali Alima}
}
@mastersthesis {5786,
	title = {D{\'e}veloppement d\&rsquo;une plateforme pour le contr{\^o}le d\&rsquo;un syst{\`e}me de production par LabVIEW},
	year = {2016},
	author = {Zerguine Khouloud et and Bouhraoua Imene}
}
@mastersthesis {5785,
	title = {Probl{\'e}matiques des Syst{\`e}mes Multi-Agent},
	year = {2016},
	author = {Amrane Sendess and Azzeddine Hayet}
}
@mastersthesis {5784,
	title = {Conception et r{\'e}alisation d\&$\#$39;un appareil industriel utilisant Arduino},
	year = {2016},
	author = {Ouchen Sarra and Benziane Abderrahmene}
}
@mastersthesis {5783,
	title = {Transform{\'e}e de Hough. Etude et Applications},
	year = {2016},
	author = {Djebaili Chahrazed}
}
@mastersthesis {5782,
	title = {Contribution {\`a} l\&$\#$39;ordonnancement robuste des blocs op{\'e}ratoires {\`a} l\&$\#$39;aide des algorithmes g{\'e}n{\'e}tiques},
	year = {2016},
	author = {Mekdade Abir}
}
@mastersthesis {5767,
	title = {Solar Radiation Forecasting using LSTMs},
	year = {2016},
	author = {Ghodbane Roumaissa}
}
@mastersthesis {5766,
	title = {Identification, Modeling and Control of the Mobile Robot\&rsquo;s Speed},
	year = {2016},
	author = {Bouzghaia Anouar}
}
@mastersthesis {5765,
	title = {D{\'e}tection des spams par r{\'e}seaux de neurones artificiels},
	year = {2016},
	author = {Hadjidj Dhiyaeeddine}
}
@mastersthesis {5764,
	title = {Mod{\'e}lisation des S{\'e}ries temporelles par les processus Autor{\'e}gressifs : Application {\`a} la pr{\'e}diction de la consommation {\'e}lectrique},
	year = {2016},
	author = {Kharchi Ilyes}
}
@mastersthesis {5763,
	title = {Pr{\'e}diction de la vitesse du vent par la technique de BaggingExtreme Learning Machines},
	year = {2016},
	author = {Benharira Riadh}
}
@mastersthesis {5733,
	title = {Vers la classification des bases de donn{\'e}es de grande dimension par l\&rsquo;application d\&rsquo;ELM},
	year = {2016},
	author = {Zeroual Salima}
}
@mastersthesis {5732,
	title = {D{\'e}veloppement d\&$\#$39;une plateforme pour le contr{\^o}le flou en temps r{\'e}el d\&$\#$39;un syst{\`e}me de production},
	year = {2016},
	author = {Zerguine Khouloud and Bouhraoua Imene}
}
@mastersthesis {5731,
	title = {R{\'e}seaux de neurones pour la surveillance d\&rsquo;un syst{\`e}me de production par LabVIEW},
	year = {2016},
	author = {Djebbari Wissem}
}
@mastersthesis {5730,
	title = {Programmation par Agent et simulation d\&$\#$39;un syst{\`e}me de fabrication flexible Master en G{\'e}nie Industriel option},
	year = {2016},
	author = {Amrane Soumiya and Azzeddine Hayet}
}
@mastersthesis {5729,
	title = {D{\'e}veloppement d\&rsquo;une application client/serveur pour la cr{\'e}ation des dossiers m{\'e}dicaux pour une entreprise (cas SCIMAT)},
	year = {2016},
	author = {Benflis Feriel}
}
@mastersthesis {5728,
	title = {R{\'e}alisation d\&rsquo;un bras robotique utilisant Arduino},
	year = {2016},
	author = {Ouchen Sara and Beziane Hibat Arrahemane}
}
@mastersthesis {5727,
	title = {Fuzzy control of a bag house of cement factory using LabVIEW},
	year = {2016},
	author = {Hemal Salim and Oulmi Tarek}
}
@proceedings {5171,
	title = {Contribution {\`a} la Pr{\'e}vision a Base d\&rsquo;Analyse Stochastique Multicrit{\`e}re Participative, des Performances d\&rsquo;un Syst{\`e}me de production Industriel},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Bouhidel lynda}
}
@proceedings {5170,
	title = {Techniques d\&rsquo;Am{\'e}lioration de la Tra{\c c}abilit{\'e} pour l\&rsquo;Optimisation d\&rsquo;une Cha{\^\i}ne Logistique},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Smaili Yamina}
}
@proceedings {5169,
	title = {Un Syst{\`e}me d\&rsquo;aide {\`a} la d{\'e}cision appliqu{\'e} au GPS pilot{\'e} par la voix humaine \&laquo; cas de distribution de produits \&raquo;},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Guezzouli L}
}
@proceedings {5168,
	title = {L\&rsquo;optimisation de l\&rsquo;extension d\&rsquo;un probl{\`e}me d\&rsquo;ordonnancement classique},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Boukelkoul Z}
}
@proceedings {5167,
	title = {Lot-sizing de plusieurs produits sur plusieurs lignes de production avec fen{\^e}tres de temps sur la production et sur les demandes},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Semassel O}
}
@proceedings {5166,
	title = {Am{\'e}lioration du probl{\`e}me de lot Sizing : Consid{\'e}rations Humaines et environnementales},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Laggoun Assia}
}
@proceedings {5165,
	title = {Lot-sizing avec optimisation des profits (\&quot;revenue management\&quot;).},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Boutarfa Youcef}
}
@proceedings {5164,
	title = {Probl{\`e}me de planification de la production avec coordination et recyclage},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Mammeri Walid}
}
@proceedings {5163,
	title = {Int{\'e}gration des probl{\`e}mes de lot Sizing et d\&rsquo;ordonnancement dans les ateliers type Flow Shop},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Belbedj Farid}
}
@proceedings {5162,
	title = {L\&rsquo;apport des r{\'e}seaux d\&rsquo;automates stochastiques pour la mod{\'e}lisation et l\&rsquo;{\'e}valuation des performances des syst{\`e}mes de production a grand espace d\&rsquo;{\'e}tat},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Belferhi Amor}
}
@book {5158,
	title = {Mise en {\oe}uvre des outils de l\&rsquo;am{\'e}lioration continue avec cas pratiques, ISBN-13: 978-3-8416-6281-1 ISBN-10: 3841662811},
	year = {2016},
	pages = {260 pages},
	publisher = {Editions universitaires europ{\'e}ennes},
	organization = {Editions universitaires europ{\'e}ennes},
	abstract = {La recherche de l{\textquoteright}excellence industrielle est devenue aujourd{\textquoteright}hui une condition essentielle de survie pour l{\textquoteright}entreprise. Dans un environnement exigeant et concurrentiel, les entreprises doivent donc chercher en permanence {\`a} renforcer leur comp{\'e}titivit{\'e}. La r{\'e}alisation de cet objectif n{\'e}cessite le recours aux outils d{\textquoteright}am{\'e}lioration continue qui visent {\`a} booster la comp{\'e}titivit{\'e} et la performance des entreprises par le tryptique\&nbsp;: r{\'e}duction des couts, am{\'e}lioration de la qualit{\'e} et diminution des d{\'e}lais. Cet ouvrage se fixe pour objectif d{\textquoteright}appliquer l{\textquoteright}un des outils de l{\textquoteright}am{\'e}lioration continue, en l{\textquoteright}occurrence la d{\'e}marche six sigma, aux processus de fabrication d{\textquoteright}une cimenterie alg{\'e}rienne (SCIMAT) et d{\textquoteright}une entreprise de fabrication de bouteilles {\`a} gaz (B.A.G).},
	url = {https://www.morebooks.de/store/gb/book/mise-en-\%C5\%93uvre-des-outils-de-l\%E2\%80\%99am\%C3\%A9lioration-continue-avec-cas-pratiques/isbn/978-3-8416-6281-1},
	author = {Mechenene Athmane and Aouag Hichem}
}
@book {5157,
	title = {Mise en {\oe}uvre des outils de l\&rsquo;am{\'e}lioration continue avec cas pratiques, ISBN-13: 978-3-8416-6281-1  ISBN-10: 3841662811},
	year = {2016},
	pages = {260},
	publisher = {Editions universitaires europ{\'e}ennes},
	organization = {Editions universitaires europ{\'e}ennes},
	abstract = {La recherche de l{\textquoteright}excellence industrielle est devenue aujourd{\textquoteright}hui une condition essentielle de survie pour l{\textquoteright}entreprise. Dans un environnement exigeant et concurrentiel, les entreprises doivent donc chercher en permanence {\`a} renforcer leur comp{\'e}titivit{\'e}. La r{\'e}alisation de cet objectif n{\'e}cessite le recours aux outils d{\textquoteright}am{\'e}lioration continue qui visent {\`a} booster la comp{\'e}titivit{\'e} et la performance des entreprises par le tryptique\&nbsp;: r{\'e}duction des couts, am{\'e}lioration de la qualit{\'e} et diminution des d{\'e}lais. Cet ouvrage se fixe pour objectif d{\textquoteright}appliquer l{\textquoteright}un des outils de l{\textquoteright}am{\'e}lioration continue, en l{\textquoteright}occurrence la d{\'e}marche six sigma, aux processus de fabrication d{\textquoteright}une cimenterie alg{\'e}rienne (SCIMAT) et d{\textquoteright}une entreprise de fabrication de bouteilles {\`a} gaz (B.A.G).},
	url = {https://www.morebooks.de/store/gb/book/mise-en-\%C5\%93uvre-des-outils-de-l\%E2\%80\%99am\%C3\%A9lioration-continue-avec-cas-pratiques/isbn/978-3-8416-6281-1},
	author = {Mechenene Athmane and Aouag Hichem}
}
@article {5145,
	title = {Outsourcing optimization in two-echelon supply chain network under integrated production-maintenance constraints, ISSN /e-ISSN 0268-3768 / 1433-3015},
	journal = {Journal of Intelligent Manufacturing },
	volume = {Vol 30},
	number = {Issue 2},
	year = {2016},
	pages = {701{\textendash}725},
	abstract = {In this paper, we study a two-echelon supply chain network consisting of multi-outsourcers and multi-subcontractors. Each one is composed of a failure-prone production unit that produces a single product to fulfil market demands with variable production rates. Sometimes the manufacturing systems are not able to satisfy demand; in this case, outsourcing option is adopted to improve the limited in-house production capacity. The outsourcing is not justified by the production lack of manufacturing systems, but is also considered for the costs minimization issues. In the considered problem, we assume that the failure rate is dependent on the time and production rate. Preventive maintenance activities can be conducted to mitigate the deterioration effects, and minimal repairs are performed when unplanned failures occurs. We consider that the production cost depends on the rate of the machine utilization. The aim of this research is to propose a joint policy based on a mixed integer programming formulation to balance the trade-off between two-echelon of supply chain. We seek to assist outsourcers to determine the integrated in-house/ outsourcing, and maintenance plans, and the subcontractors to determine the integrated production-maintenance plans so that the benefit of the supply chain is maximized over a finite planning horizon. We develop an improved optimization procedure based on the genetic algorithms, and we discuss and conduct computational experiments to study the managerial insights for the developed framework.},
	url = {https://link.springer.com/article/10.1007/s10845-016-1273-3},
	author = {Haoues Mohammed and Dahane Mohammed and Mouss Nadia Kenza}
}
@proceedings {5134,
	title = {Measuring intellectual capital of an organization},
	journal = {Advances in automotive technologies},
	year = {2016},
	author = {Brahmi Samira}
}
@proceedings {5093,
	title = {Mod{\'e}lisation et {\'e}valuation des performances des syst{\`e}mes logistiques},
	journal = {JD{\textquoteright}2017 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Arrar Nacereddine}
}
@proceedings {5092,
	title = {Am{\'e}lioration du processus de capitalisation et de partage des connaissances pour la maximisation de la valeur d\&rsquo;un syst{\`e}me de production},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Titah Mawloud}
}
@proceedings {5091,
	title = {Conception et d{\'e}ploiement des syst{\`e}mes de gestion de donn{\'e}es techniques dans l\&rsquo;ing{\'e}nierie de production},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Tkouti Sami}
}
@proceedings {5090,
	title = {Optimisation de la navigation autonome d\&rsquo;un robot dans un espace de travail Industriel},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Medgrou Aicha}
}
@proceedings {5089,
	title = {Implantation d\&rsquo;une GMAO dans un syst{\`e}me de production pour l\&rsquo;am{\'e}lioration de la performance de l\&rsquo;entreprise},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Belhoul Haroun}
}
@proceedings {5088,
	title = {La politique de Suret{\'e} de Fonctionnement dans les syst{\`e}mes industriels : Application aux stations d\&rsquo;{\'e}puration dites STEP},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {NOUNE Med Said}
}
@proceedings {5087,
	title = {Contribution {\`a} l\&rsquo;utilisation des r{\'e}seaux d\&rsquo;achat Electroniques (e-sourcing) en vue de l\&rsquo;optimisation des structures d\&rsquo;approvisionnements de l\&rsquo;alg{\'e}rienne des textiles},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {AMEUR Zouina}
}
@proceedings {5086,
	title = {Approche de l\&rsquo;usine intelligente dans l\&rsquo;industrie 4.0, en utilisant le concept d\&rsquo;internet objets},
	journal = {JD{\textquoteright}2016 Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Bouhafna Kheyreddine}
}
@proceedings {5082,
	title = {New fuzzy-Based Process Control System for a bag filter of a cement factory},
	journal = { ICAAT International Conference on Advances in Automotive Technologies Istanbul, Turkey},
	year = {2016},
	url = { http://www.aat2016conference.com/},
	author = {Zermane Hanane}
}
@proceedings {5081,
	title = {Fuzzy Control of a Baghouse for Emission System in a Cement Factory using LabVIEW},
	journal = { ICAAT International Conference on Advances in Automotive Technologies Istanbul, Turkey},
	year = {2016},
	url = { http://www.aat2016conference.com/},
	author = {Zermane Hanane}
}
@proceedings {5062,
	title = {Measuring intellectual capital of an organization},
	journal = {International Conference on Advances in Automotive Technologies 11-14 Octobre Turkey},
	year = {2016},
	pages = {53-53},
	url = {https://conferencealerts.com/show-event?id=170556},
	author = {Aitoche Samia}
}
@article {5037,
	title = {Fault Diagnosis of Manufacturing Systems Using AntTreeStoch with Parameter Optimization by ACO, ISSN / e-ISSN  1738-494X / 1976-3824},
	journal = {J MECH SCI TECHNOL},
	year = {2016},
	abstract = {
	In this paper, we propose diagnostic modules for complex and dynamic systems. These modules are based on three ant colony algorithms, which are AntTreeStoch, Lumer \&amp; Faieta and Binay ant colony. We chose these algorithms for their simplicity and their wide application range. However, we cannot use these algorithms in their basement forms as they have several limitations. To use these algorithms in a diagnostic system, we have proposed three variants. We have tested these algorithms on datasets issued from two industrial systems which are clinkering system and pasteurization system.

},
	url = {https://www.semanticscholar.org/paper/Fault-Diagnosis-of-Manufacturing-Systems-Using-with-Kadri-Mouss/01cea502034f7b8f0ed9a1e79c4ac927afa245b6$\#$paper-header},
	author = {Kadri Ouahab and Mouss Leila Hayet and Mouss Med Djamel}
}
@proceedings {4994,
	title = {Exploration du Potentiel de la Vision Artificielle pour la Reconnaissance d\&rsquo;Objets dans une image dans un Contexte Industriel},
	journal = {JD{\textquoteright}2016  Journ{\'e}es des doctorants 14 Octobre  Batna, Alg{\'e}rie},
	year = {2016},
	author = {Bellal Salah Eddine}
}
@proceedings {4993,
	title = {Conception d\&$\#$39;un syst{\`e}me d\&rsquo;aide {\`a} la maintenance collaborative bas{\'e}e sur la r{\'e}alit{\'e} mixte},
	journal = {JD{\textquoteright}2016  Journ{\'e}es des doctorants 14 Octobre  Batna, Alg{\'e}rie},
	year = {2016},
	author = {Hamidene Rabie}
}
@proceedings {4992,
	title = {Contribution {\`a} la mise en place d\&rsquo;une solution distribu{\'e}e intelligente pour le choix d\&rsquo;une technique d\&rsquo;ordonnancement ad{\'e}quate},
	journal = {JD{\textquoteright}2016  Journ{\'e}es des doctorants 14 Octobre Batna, Alg{\'e}rie},
	year = {2016},
	author = {Abdessamed Ahmed Adnane}
}
@proceedings {4991,
	title = {Strat{\'e}gie de la Supervision Industrielle pour la Conduite d\&rsquo;un Syst{\`e}me de Production Complexe : Vers une architecture Centralis{\'e}e},
	journal = {JD{\textquoteright}2016  Journ{\'e}es des doctorants 14 Octobre Batna, Alg{\'e}rie},
	year = {2016},
	author = {Benaicha Sonia}
}
@proceedings {4990,
	title = {Pronostic industriel distribu{\'e} des syst{\`e}mes complexes {\`a} base d\&rsquo;agents},
	journal = {JD{\textquoteright}2016  Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Benaggoune Khaled}
}
@proceedings {4989,
	title = {Impact du diagnostic sur l\&rsquo;{\'e}valuation des performances d\&rsquo;un syst{\`e}me dynamique tol{\'e}rant aux fautes},
	journal = {JD{\textquoteright}2016  Journ{\'e}es des doctorants 14 Octobre  Batna, Alg{\'e}rie},
	year = {2016},
	author = {Kebbas Med Salah}
}
@proceedings {4988,
	title = {Conception d\&rsquo;un outil informatique pour l\&rsquo;analyse et le traitement de param{\`e}tres d{\'e}livr{\'e}s par un {\'e}quipement en vu de diagnostiquer les d{\'e}fauts},
	journal = {JD{\textquoteright}2016  Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Zaid Ammar}
}
@proceedings {4987,
	title = {Une plate-forme e-maintenance par les syst{\`e}mes Immunitaire Artificiels},
	journal = {JD{\textquoteright}2016  Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Haboussi Ammar}
}
@proceedings {4986,
	title = {D{\'e}veloppement de m{\'e}thodes hybrides pour le pronostic des syst{\`e}mes de production},
	journal = {JD{\textquoteright}2016  Journ{\'e}es des doctorants, Batna, Alg{\'e}rie},
	year = {2016},
	author = {Bouznita Mohammed}
}
@proceedings {4985,
	title = {Syst{\`e}me intelligent d\&$\#$39;aide {\`a} la d{\'e}cision pour la pr{\'e}diction et l\&$\#$39;optimisation des param{\`e}tres d\&$\#$39;un forage p{\'e}trolier},
	journal = {JD{\textquoteright}2016  Journ{\'e}es des doctorants 14 Octobre Batna, Alg{\'e}rie},
	year = {2016},
	author = {Rezki Djamil}
}
@proceedings {4984,
	title = {Vers un pronostic de d{\'e}faillances des syst{\`e}mes dynamiques complexes par les Bond Graphs},
	journal = {JD{\textquoteright}2016  Journ{\'e}es des doctorants 25 \& 26 Octobre Batna, Alg{\'e}rie},
	year = {2016},
	author = {Mebarki Nassima}
}
@proceedings {4983,
	title = {Syst{\`e}me de Poursuite d\&rsquo;objets {\`a} base de la vision 3D. 1{\`e}re Journ{\'e}es des doctorants},
	journal = {JD{\textquoteright}2016  Journ{\'e}es des doctorants 25 \& 26 Octobre Batna, Alg{\'e}rie},
	year = {2016},
	author = {Rahmani Abdellah}
}
@proceedings {4982,
	title = { Une nouvelle approche pour la s{\'e}curit{\'e} des Syst{\`e}mes de Contr{\^o}le et d\&$\#$39;Acquisition de Donn{\'e}es SCADA},
	journal = {JD{\textquoteright}2016  Journ{\'e}es des doctorants 14 Octobre Batna, Alg{\'e}rie},
	year = {2016},
	author = {Guettafi Salah}
}
@proceedings {4968,
	title = {New fuzzy-Based Process Control System for a bag filter of a cement factory},
	journal = { ICAAT International Conference on Advances in Automotive Technologies Istanbul, Turkey},
	year = {2016},
	url = { http://www.aat2016conference.com/},
	author = {Hanane Zermane}
}
@proceedings {4967,
	title = {Fuzzy Control of a Baghouse for Emission System in a Cement Factory using LabVIEW},
	journal = { ICAAT International Conference on Advances in Automotive Technologies Istanbul, Turkey},
	year = {2016},
	url = {http://www.aat2016conference.com/},
	author = {Zermane Hanane}
}
@conference {4935,
	title = {Using several intelligences for complex industrial process monitoring: Detection and diagnosis},
	booktitle = {IOEM 2016 International Conference on Industrial Engineering and Operations Management At Kuala Lumpur, Malaysia },
	volume = {Volume 6},
	year = {2016},
	abstract = {
	The objective of the current paper is to present an intelligent system for complex process monitoring, based on 



	artificial intelligence technologies. This system aims to realise with success some complex process monitoring tasks that are:



	detection, diagnosis. For this purpose, the development of a multi-agent system that combines multiple intelligences such as:



	multivariate control charts, neural networks, has became a necessary. The proposed system is evaluated in the monitoring of the



	complex process Tennessee Eastman Process. 

},
	url = {https://www.researchgate.net/publication/299510304_Using_several_intelligences_for_complex_industrial_process_monitoring_detection_and_diagnosis},
	author = {Rezki Nafissa}
}
@proceedings {4934,
	title = {Development of an internet-based fuzzy control system of manufacturing plant},
	journal = {IOEM 2016 International Conference on Industrial Engineering and Operations Management, Kuala Lumpur, Malaysia },
	year = {2016},
	url = {http://ieomsociety.org/program_ieom_2016.pdf},
	author = {Zermane Hanane}
}
@conference {4932,
	title = {Fault Diagnosis of Manufacturing Systems Using AntTreeStoch with Parameter Optimization by ACO, ISSN / e-ISSN  2157-362X / 2157-3611},
	booktitle = { ICIEM 2016 : 18th International Conference on Industrial Engineering and Management, Barcelona, Spain},
	year = {2016},
	abstract = {In this paper, we propose diagnostic modules for complex and dynamic systems. These modules are based on three ant colony algorithms, which are AntTreeStoch, Lumer \&amp; Faieta and Binay ant colony. We chose these algorithms for their simplicity and their wide application range. However, we cannot use these algorithms in their basement forms as they have several limitations. To use these algorithms in a diagnostic system, we have proposed three variants. We have tested these algorithms on datasets issued from two industrial systems which are clinkering system and pasteurization system.},
	url = {https://www.researchgate.net/publication/285578275_Fault_Diagnosis_of_Manufacturing_Systems_Using_AntTreeStoch_with_Parameter_Optimization_by_ACO},
	author = {Kadri Ouahab}
}
@proceedings {4931,
	title = {Kernel Principal Components Analysis with Extreme Learning Machines for Wind Speed Prediction.},
	journal = { IREC2016 Seventh International Renewable Energy Congress},
	year = {2016},
	abstract = {Nowadays, wind power andprecise forecasting are of great importancefor the development ofmodern electricalgrids.In this paperwepropose aprediction systemfor time seriesbased onKernelPrincipalComponent Analysis(KPCA) andExtremeLearningMachine(ELM). To compare the proposed approach, threedimensionality reduction techniques were used:full space (50 variables), part of space (last four variables) and classical Principal Components Analysis (PCA). These models were compared using three evaluation criteria: mean absoluteerror (MAE), root mean squareerror (RMSE), and normalizedmean square error (NMSE). The results show that the reduction of the original input space affectspositively the prediction output of the wind speed.Thus,It can be concluded that the non linear model (KPCA)model outperform the other reduction techniques in terms of prediction performance.},
	url = {https://hal.inria.fr/hal-01394000/document},
	author = {Mezache Hatem}
}
@article {4923,
	title = { An Efficient Hybrid Approach Based on Multi-Agent System and Emergence Method for the Integration of Systematic Preventive Maintenance Policies, ISSN 2279-0764},
	journal = {IJCIE International Journal of Computer and Information Engineering},
	volume = { Vol 3},
	number = {N{\textdegree}4},
	year = {2016},
	abstract = {This paper proposes a novel hybrid algorithm for the integration of systematic preventive maintenance policies in hybrid flow shop scheduling to minimize makespan. We have implemented a problem-solving approach for optimizing the processing time, methods based on metaheuristics. The proposed approach is inspired by the behavior of the human body. This hybridization is between a multi-agent system and inspirations of the human body, especially genetics. The effectiveness of our approach has been demonstrated repeatedly in this paper. To solve such a complex problem, we proposed an approach which we have used advanced operators such as uniform crossover set and single point mutation. The proposed approach is applied to three preventive maintenance policies. These policies are intended to maximize the availability or to maintain a minimum level of reliability during the production chain. The results show that our algorithm outperforms existing algorithms. We assumed that the machines might be unavailable periodically during the production scheduling.},
	url = {https://www.researchgate.net/publication/303858216_An_Efficient_Hybrid_Approach_Based_on_Multi-Agent_System_and_Emergence_Method_for_the_Integration_of_Systematic_Preventive_Maintenance_Policies},
	author = {Abdelhadi Adel and Kadri Ouahab}
}
@article {4922,
	title = {Toolbox Supports Group Awareness In Groupware, ISSN 1583-7165},
	journal = { Annals. Computer Science Series.},
	year = {2016},
	pages = {pp. 117-122},
	abstract = {Group awareness tools are developed to minimize the time of cooperative application realization and spare designers a lot of effort devoted to integrating the group awareness aspect into groupware. But these tools have several disadvantages, such as dependence on a single type of application or overloading the minds of users with unnecessary information. From here comes the need to develop a tool that allows to offer information of group awareness configurable and to be both generic and easy to use. Our article presents some tools that have inspired several ideas. It proposes a design of a new toolbox that allows a better interpretation of group awareness information. Finally, it presents a variant of the client/server architecture based on work area.},
	url = {https://anale-informatica.tibiscus.ro/download/lucrari/14-2-16-Kadri.pdf},
	author = {Kadri Ouahab and Abdelhadi Adel and Mouss Leila Hayet}
}
@article {4921,
	title = {A Multi-Agent Solution to Distributed Fault Diagnosis of Preheater Cement Cyclone,  ISSN / e-ISSN 0219-6867 / 1793-6896},
	journal = {Journal of Advanced Manufacturing Systems},
	volume = {Vol 15},
	number = {Issue 04},
	year = {2016},
	pages = {pp. 209-221},
	abstract = {Systems health monitoring is essential to guaranteeing the safe, efficient, and reliable operation of engineering systems. Integrated systems health management methodologies include fault diagnosis mechanism. Diagnosis involves detecting when a fault has occurred, isolating the true fault, and identifying the true damage to the system. This important issue is even harder when the systems to be diagnosed are dynamic and spatially distributed systems with their successively increasing complexity. For such systems, a single diagnostic entity having a model of the whole system approach is inappropriate. Whereas a distributed approach of multiple diagnostic agents can offer a solution. An overall systematic solution for these issues could be obtained by an artificial intelligent mechanism called the multi-agent system (MAS). This paper presents a MAS model for fault diagnosis based on logical theory of diagnosis. In this approach, each local diagnostic agent has knowledge above its subsystem and an abstract view of the neighboring subsystems and it is able to determine the local minimal diagnoses that are consistent with global diagnoses. The multi-agent models are simulated in Java Agent Development Framework and are applied to the preheated cement cyclone in the workshop of SCIMAT clinker.},
	url = {https://www.worldscientific.com/doi/10.1142/S021968671650015},
	author = {Chouhal Ouahiba and Mouss Leila Hayet and Benaggoune Said and Mahdaoui Rafik}
}
@article {4920,
	title = {On the use of multi-agent systems for the monitoring of industrial systems, ISSN /e-ISSN 1735-5702 / 1735-5702},
	journal = {Journal of Industrial Engineering International},
	volume = {vol 12},
	year = {2016},
	pages = {pp. 111{\textendash}118},
	abstract = {The objective of the current paper is to present an intelligent system for complex process monitoring, based on artificial intelligence technologies. This system aims to realize with success all the complex process monitoring tasks that are: detection, diagnosis, identification and reconfiguration. For this purpose, the development of a multi-agent system that combines multiple intelligences such as: multivariate control charts, neural networks, Bayesian networks and expert systems has became a necessity. The proposed system is evaluated in the monitoring of the complex process Tennessee Eastman process.},
	url = {https://link.springer.com/article/10.1007/s40092-015-0133-7},
	author = {Rezki Nafissa and Kazar Okba and Mouss Leila Hayet and Kahloul Laid}
}
@article {4919,
	title = {A Novel Approach for Mobile Maintenance Using Mobile Agents Technology and Mobile Devices, ISSN / e-ISSN 0219-6867 / 1793-6896},
	journal = {Journal of Advanced Manufacturing Systems},
	volume = {14},
	number = {2},
	year = {2016},
	pages = {pp. 55-74},
	abstract = {The long use of a system causes its degradation. Hence, the maintenance activity is required in order to keep and improve the efficiency in the system. With the rapid development in networking technology, a need appears to change the manufacturing strategies. These new technologies improve the maintenance process, and establish remote maintenance (tele-maintenance, e-maintenance and m-maintenance). These kinds of maintenance try to provide personnel maintenance with the right information at the suitable time, which makes information available, anywhere and anytime. Our proposition is the use of mobile agent technology to reduce the maintenance costs and solve the problem of the unavailability of an expert in all phases of condition-based maintenance (CBM) strategy. The mobile agent technology overcomes a lot of problems and there is not much work that has used this technology. We have also used the web services (WS) to insure interoperability between machines and to support interaction over the network. Our approach gives great support to the maintenance engineer as it facilitates the access to decision-making support, work order, etc. which are available in the device like smartphone. This paper presents the development of a mobile maintenance support system based on mobile agent technology. The proposed system, the web and agent technology as well as remote communication were tested successfully.},
	url = {https://www.worldscientific.com/doi/10.1142/S0219686715500055},
	author = {Abid Khadija and Mouss Leila Hayet and Kazar Okba and Kahloul Laid}
}
@article {3229,
	title = {
	Data monitoring and performance analysis of a 1.6kWp grid connected PV system in Algeria, ISBN 1309-0127


 

},
	journal = {IJRER International Journal of Renewable Energy Research},
	volume = {Vol 6},
	number = {N{\textdegree}1},
	year = {2016},
	pages = {34-42},
	abstract = {
	The present study deals with the performance of a 1.6kWp grid connected PV system installed at Batna University, in Algeria. The average solar energy received was 5.21 kWh/m{\texttwosuperior}.d, the grid connected PV system seems to be a good candidate for generating electricity in this region. The system was monitored during one year of continuous operation and data analysis to evaluate the performance of the grid connected PV system. The performance ratio of the system ranged between 51 and 61\%. Furthermore, the total produced energy by the PV array was 1931.7kWh and the supplied energy to the grid was 1705kWh. The annual final yield was 1065.6kWh/kWp. Moreover, an analysis of the energy losses in the system was performed, this makes it possible to determine the effect of the capture and system losses on the total energy balance of the system. All the electricity generated by the system was fed into the internal electrical grid of the university.

},
	url = {https://www.ijrer.org/ijrer/index.php/ijrer/article/view/3020},
	author = {Chouari Adel and Hamouda Chaabane and Ghagui Azziz}
}
@article {3228,
	title = {Theoretical and experimental investigation of solar heat potential at low temperatures: Towards large scale integration in the agro food sector, ISBN 1309-0127},
	journal = {IJRER International Journal of Renewable Energy Research},
	volume = {Vol.6},
	number = { No.1},
	year = {2016},
	abstract = {
	Several applications in the agro food sub-sector have been classified as suitable to be supplied by solar heating systems. The present work deals with the potential evaluation of solar thermal energy under climatic conditions of Algeria. In a first part, an experimental investigation conducted on small scale solar water heating system is presented followed by simulation. The experimental tests revealed the thermal behavior of the system as well as the outlet temperature levels which can be reached by locally manufactured flat plat collectors. The second part presents the potential of solar heat for industrial applications, particularly those consisting of heating make-up water and water feedback from heat recovery wich exists in almost all the agro food industries. Thus, water inlet temperature through the secondary circuit is considered to be ranging from 20 to 90{\textdegree}C. The results showed that the annual specific energy yield delivered by the solar system decreases by increasing water feedback temperature.\&nbsp;

},
	url = {https://www.ijrer.org/ijrer/index.php/ijrer/article/view/3085},
	author = {Boutagriout Badreddine and Chaabane  Hamouda and Smadi Hacene}
}
