Publications by Type: Conference Proceedings

2019
Y. Beddiaf, F. Zidani, and undefined, “New MRAS Approach for Sensorless control of IM,” 19th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA). pp. 36-40, 2019.Abstract
In this paper we present a new approach of MRAS based on current model only. This technique aims to offsets compensating and solving problems of ordinary MRAS in low speed. Also this new approach allows us to estimate the components of the rotor flux and the rotor speed without using the voltage model. The results of the simulation and the experimental results are presented and show the effectiveness of the proposed technique.
M. Bahloul, A. N. Vargas, L. C. Alaoui, S. Drid, and M. Chaabane, “Modified Robust Model Reference Adaptive System Scheme for a Speed Sensorless Vector Control of Induction Motor,” 19th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA). pp. 473-478, 2019.Abstract
This paper presents a robust rotor speed sensorless control strategy for induction motor. The main purpose is to overcome the instability issue for zero/low speed operating mode while considering that the rotor resistance is subject to uncertainties or variations. A Modified Model Reference Adaptive System speed estimation scheme is presented, and its sensitivity to stator resistance mismatches is investigated. The proposed approach introduces a discrete reference and adjustable models of the motor. Moreover, an adaptive discrete speed estimation scheme is synthesized on the basis of the extended Kalman filter technique. The proposed sensorless control scheme is tested using the professional Hardware simulator AMEsim (LMS). The obtained results confirm the superiority and ability of the proposed method compared to the classic Model Reference Adaptive System speed estimation scheme to guarantee a …
2018
H. Khelloufi and S. Benaicha, “New Synergetic Control for an Induction Motor with a synergetic Speed and Rotor Flux Estimation,” ICCEE’18 International conference on communications and electrical engineering. 2018.
S. Nadji and S. Benaicha, “Robust Dynamic surface control of interior Permanent Magnet Synchronous Motors,” international conference on Electronics, Energy and measurement (IC2EM). 2018.
S. Nadji, S. Benaicha, N. Sabeur, and M. Zaihidee, “Robust Backstepping control with integral action of IPM Synchronous Motor,” The Third international conference on Electrical sciences and technologies in Maghreb (CISTEM). 2018.
N. Benbaha, F. Zidani, M. S. Nait-Said, S. Zouzou, S. Boukebbous, and H. Ammar, “dSPACE Validation of Improved Backstepping Optimal Energy Control for Photovoltaic Systems,” 6th International Renewable and Sustainable Energy Conference (IRSEC). pp. 1-6, 2018.Abstract
In this paper, an efficient and fast MPPT power control of photovoltaic systems based on backstepping approach is presented. The proposed control scheme consists of two cascade loops; in the first loop, the auto-scaling variable step-size perturb and observe MPPT technique estimates the reference voltage of all electrical load values. The robust backstepping controller has been adopted to remove steady state oscillations in the second loop. Further, the performance of proposed control system has been analyzed through dSPACE DS-1104 experimental validation with Isofoton photovoltaic module under real climatic conditions at Biskra (Algeria) region. The results obtained by the used controller averred a good improvement.
A. Y. Cherif, H. Laib, and K. Barra, “Implementation of finite set model predictive current control for shunt active filter,” 9th International in Renewable Energy Congress (IREC), . 2018.Abstract
The present paper investigates the effectiveness of Finite Set Model Predictive Current Control (FS-MPCC) for Shunt Active Filter SAF and its implementation on real bench. The method uses a Multivariable Filter MVF to extract the fundamental components of currents and voltages of the grid. The predictive control method uses a cost function containing the error of the filtered currents to be controlled. The performances of the control method are revealed throw simulation and experimental results and then commented. The obtained results show that predictive control is a powerful control method for such application in term of tracking performance and quality energy.
M. Sellali, A. Betka, S. Drid, A. Djerdir, M. Tiar, and S. Abdedaim, “Implementation of power management based on fuzzy logic for a hybrid PV/Fuel Cell generation system,” International Conference On Emerging and Renewable Energy : Generation and Automation, Sousse-Tunisia. pp. 1-6, 2018.Abstract
The present paper deals with a real time implementation of a new adaptive frequency-based power management strategy of a small-scale hybrid battery-super capacitor system, dedicated to an electric vehicle. The ultimate objective of the strategy is to ensu
L. Bougouffa and A. Chaghi, “Optimal Coordination Time Interval for DOCRs in Presence of D-FACTS,” IEEE 5th International Congress on Information Science and Technology (CiSt), Marrakech, Morocco. pp. 477-480, 2018.Abstract
The paper presents a LP-Dual Simplex algorithm for linear constrained optimization problems. This approach proposed for the optimal coordination of Directional Over-Current Relays (DOCRs) in compensated distribution power systems with Distribution-FACTS devises i.e. Thyristor Controlled Series Capacitor (TCSC). The optimization problem is subject to a number of constraints which are mainly focused on the operation of the backup relay, which should operate if a primary relay fails to respond to the fault near to it, Time Dial Setting (TDS), Plug Setting (PS) and the minimum operating time of a relay. The system used to check the efficiency of the optimization algorithm which is IEEE 33-bus models.
F. Mazouz, S. Belkacem, I. Colak, and S. Drid, “Direct Power Control of DFIG by Sliding Mode Control and Space Vector Modulation,” 7th International Conference on Systems and Control (ICSC), Valencia, Spain. pp. 462-467, 2018.Abstract
This paper presents a comparative study of two approaches for the direct power control (DPC) of doubly-fed induction generator (DFIG) based on wind energy conversion system (WECS). Vector Control (VC) and Sliding Mode Control (SMC). The simulation results of the DFIG of 5 KW in the presence of various uncertainties were carried out to evaluate the capability and robustness of the proposed control scheme. The (SMC) strategy is the most appropriate scheme with the best combination such as reducing high powers ripple, diminishing steady-state error in addition to the fact that the impact of machine parameter variations does not change the system performance.
T. Alnejaili, L. C. Alaoui, D. Mehdi, A. Alibi, and S. Drid, “An advanced energy management system with an economical optimization for a multi-sources stand-alone Home,” 7th International Conference on Systems and Control (ICSC), Valencia, Spain. pp. 154-159, 2018.Abstract
This paper proposes an advanced energy management system (EMS) for a stand-alone hybrid energy system. The considered hybrid system includes a photovoltaic panel, a fuel cell, an electrolyzer and a battery bank. The EMS aims to optimize the utilization cost of the hybrid power system and to improve its energy balance with the elimination of any energy deficit.The hybrid power system has been tested by simulation using models implemented in Matlab/Simulink software. The simulation is performed over a long period of time in order to evaluate the effectiveness of the management strategy. The simulation results confirm the efficiency of the proposed control strategy, as it increases the reliability of the system and improves its energy balance.
T. Alnejaili, A. Alibi, L. C. Alaoui, D. Mehdi, H. Sahraoui, and S. Drid, “Control and optimal management of a multi-source energy system,” 7th International Conference on Systems and Control (ICSC), Valencia, Spain. pp. 164-168, 2018.Abstract
The main aim of this work is to develop an energy management algorithm (EMS) that control renewable energy system that consists of PV panels, lead acid battery banks and supercapacitor. On addition to that a Graphical user interfaces is developed to control the power system. The efficiency of the controller was tested by the mean of simulation, the result assume the effectiveness of the proposed control method and the intelligent management of the power flow controller.
T. Boutabba, et al., “dSPACE Real-Time Implementation Sliding Mode Maximum Power Point Tracker for Photovoltaic system,” 7th International Conference on Systems and Control (ICSC), Valencia, Spain. pp. 137-141, 2018.Abstract
Maximum power point trackers are so important in photovoltaic systems to improve their overall efficiency. This paper presents a photovoltaic system with maximum power point tracking facility. An intelligent Sliding mode controller method is proposed in this paper to achieve the maximum power point tracking of PV modules. The system consists of a photovoltaic solar module connected to a DC-DC boost converter. The system is modeled using MATLAB/SIMULINK. The system has been experienced under disturbance in the photovoltaic loads and irradiation levels. The simulation results show that the proposed maximum power tracker tracks the maximum power accurately and successfully in all tested conditions. The MPPT system is then experimentally implemented. DSPACE is used in the implementation of the MPPT hardware setup for real-time control. Data acquisition and system control are implemented using dSPACE 1104 software and digital signal processor card. The experimental results show the efficiency of the proposed algorithm and confirm the simulation results.
H. Sahraoui, et al., “The dynamic control and optimal management of the energy in the case of a territory isolated in Batna city,” 7th International Conference on Systems and Control (ICSC), Valencia, Spain. pp. 160-163, 2018.Abstract
This paper deals with the optimal sizing and management of power system for medium rural health clinic located in the Batna region (Algeria). The study evaluates different power configurations depending on economic, environmental and technical characteristics. The main objective is to cover the entire loads with an uninterruptible, high quality power supplies with lowest cost of energy and high renewable energy penetration.
N. Bouchiba, S. Keskes, S. Sallem, L. C. Alaoui, S. Drid, and M. B. A. Kammoun, “Experimental control of a Doubly Fed Induction Generator based Wind Energy Conversion System,” 2018 7th International Conference on Systems and Control (ICSC), Valencia, Spain. pp. 142-147, 2018.Abstract
In recent years, electrical energy has become a vital component for human life. Moreover, the interest for alternative energy sources has an exponential rise nowadays as a consequence of the limitation in conventional energy sources. Wind energy is considered one of the most important renewable energy sources. Nowadays, in order to ensure an optimal energy use, management and control technologies of wind energy conversion system are developed rapidly. In this paper, both of the vector controller and sliding mode control strategy for an isolated doubly fed induction generator-based wind energy conversion system are studied, described, tested and compared. In order to ensure the safety of the connected load, the main purpose of the present work is to maintain output stator voltage and frequency at their reference values whether for load demand power variations and wind speed fluctuations. Experimental results demonstrate the effectiveness of the presented control strategies.
M. Sellali, A. Betka, S. Drid, A. Djerdir, M. Tiar, and S. Abdedaim, “Implementation of new adaptive power-split management strategy in a battery-super capacitor electric vehicle,” 2018 International Conference on Electrical Sciences and Technologies in Maghreb (CISTEM) IEEE. pp. 1-6, 2018.Abstract
The present paper deals with a real time implementation of a new adaptive frequency-based power management strategy of a small-scale hybrid battery-super capacitor system, dedicated to an electric vehicle. The ultimate objective of the strategy is to ensure a smart use of the two sources, improving as a consequence both the autonomy and the system lifetime. To do so, and unlike the conventional power frequency separation technique, the filter adapts its pass band frequency to keep the charge’s state of each source in a tolerable range and provides power amounts to the load demand. The experimental results demonstrate that the system commutates smoothly between the operating modes, which proves the effectiveness of the proposed control techniques.
2017
S. Nadji and S. Benaicha, “Integral Backstepping Control of PMSM for Electrical Vehicle ApplicationOctober,” International Conference on  Electrical Engineering -ICEE’2017. 2017.
M. Hamdi, L. C. Alaoui, S. Drid, and N. Bouguila, “Management, optimization and conversion of energy for self-governing house,” 2017 International Conference on Control, Automation and Diagnosis (ICCAD),Hammamet, Tunisia. pp. 429-433, 2017.Abstract
The problematic is to study the management of a hybrid energy system, depending on demand, dedicated to self-governing houses. Energy can be supplied by a photovoltaic panel, a wind turbine and a diesel generator and it can be stored in batteries. The study of this type of systems requires a good control strategy and an effective management. The main objective of this study is to develop a reliable management model and to simulate the hybrid system of a house located in Monastir-Tunisia, with different domestic loads, such as a washing machine, freezer, refrigerator... A system of energy management that can adjust, optimize and adapt the consumption to the available energy resources while satisfying the request is then examined. Thus, to study the problem of energy management and reduce energy consumption and production of greenhouse gases, the definition off an analysis tool on MATLAB/SIMULINK has allowed the covering of load demand in an optimized manner using the optimal system chosen by HOMER.
N. Bouchiba, A. Barika, L. C. Alaoui, S. Drid, S. Sallem, and M. B. A. Kammoun, “A real-time Backstepping control strategy for a doubly fed induction generator based wind energy conversion system,” 2017 6th International Conference on Systems and Control (ICSC), Batna, Algeria. pp. 549-554, 2017.
N. Benbaha, F. Zidani, M. S. Nait-Said, S. Boukebbous, and H. Ammar, “Optimal Energy Control of Induction Motor Standalone Photovoltaic-Battery Pumping System,” 6th International Conference on Systems and Control. 2017.

Pages