HOME / PRODUCTIONS SCIENTIFIQUE /

Publications

Bouakkar, Loubna, Hacene Ameddah, and Hammoudi Mazouz. 2021. “A Particle Swarm Optimization-Based Approach for Finding Reliability in a Total Hip Prosthesis”. In Artificial Neural Network Applications in Business and Engineering, , p. 222-242. Abstract
Nowadays, we assist the global extension of reliability optimization problems from the design phase of systems and sub-systems to the design and operational phases, not only of systems and sub-systems, but also of bio functionality design. This chapter investigates the relative performances of particle swarm optimization (PSO) variants when used to find reliability in the total hip prosthesis by finding the maximization of jumping distance (JD) to avoid dislocation and the minimization of system’s stability to offer mobility. Statistical analysis of different cases of head diameters of 22, 28, 36, 40 mm has been conducted to survey the convergence and relative performances of the main PSO variants when applied to solve reliability in the total hip prosthesis.
Ameddah, Hacene. 2021. “Integrated Kinematic Machining Error Compensation for Impeller Rough Tool Paths Programming in a Step-Nc Format Using Neural Network Approach Prediction”. In Artificial Neural Network Applications in Business and Engineering, , p. 144-170. Abstract
The most important components used in aerospace, ships, and automobiles are designed with free form surfaces. An impeller is one of the most important components that are difficult to machine because of its twisted blades. This research book is based on the premise that a STEP-NC program can document “generic” manufacturing information for an impeller. This way, a STEP-NC program can be made machine-independent and has an advantage over the conventional G-code-based NC program that is always generated for a specific CNC machine. Rough machining is recognized as the most crucial procedure influencing machining efficiency and is critical for the finishing process. The research work reported in this chapter focuses on introduces a fully STEP-compliant CNC by putting forward an interpolation algorithm for non uniform rational basic spline (NURBS) curve system for rough milling tool paths with an aim to solve the problems of kinematic errors solutions in five axis machine by neural network implementation.
Khalid, Faiza, et al. 2021. “A Study of the Thermo-Mechanical Behavior of a Gas Turbine Blade in Composite Materials Reinforced with Mast”. Revue des Composites et des Matériaux Avancés 31 (2) : 101-108. Publisher's Version Abstract
The turbine blades are subjected to high operating temperatures and high centrifugal tensile stress due to rotational speeds. The maximum temperature at the inlet of the turbine is currently limited by the resistance of the materials used for the blades. The present paper is focused on the thermo-mechanical behavior of the blade in composite materials with reinforced mast under two different types of loading. The material studied in this work is a composite material, the selected matrix is a technical ceramic which is alumina (aluminum oxide Al2O3) and the reinforcement is carried out by short fibers of high modulus carbon to optimize a percentage of 40% carbon and 60% of ceramics. The simulation was performed numerically by Ansys (Workbench 16.0) software. The comparative analysis was conducted to determine displacements, strains and Von Mises stress of composite material and then compared to other materials such as Titanium Alloy, Stainless Steel Alloy, and Aluminum 2024 Alloy. The results were compared in order to select the material with the best performance in terms of rigidity under thermomechanical stresses. While comparing these materials, it is found that composite material is better suited for high temperature applications. On evaluating the graphs drawn for, strains and displacements, the blade in composite materials reinforced with mast is considered as optimum.
Ali-Alkebsi, Ebrahim-Ahmed, et al. 2021. “Design of graded lattice structures in turbine blades using topology optimization”. International Journal of Computer Integrated Manufacturing 34 (4). Publisher's Version Abstract
Designing and manufacturing lattice structures with Topology Optimization (TO) and Additive Manufacturing (AM) techniques is a novel method to create light-weight components with promising potential and high design flexibility. This paper proposes a new design of lightweight-graded lattice structures to replace the internal solid volume of the turbine blade to increase its endurance of high thermal stresses effects. The microstructure design of unit cells in a 3D framework is conducted by using the lattice structure topology optimization (LSTO) technique. The role of the LSTO is to find an optimal density distribution of lattice structures in the design space under specific stress constraints and fill the inner solid part of the blade with graded lattice structures. The derived implicit surfaces modelling is used from a triply periodic minimal surfaces (TPMS) to optimize the mechanical performances of lattice structures. Numerical results show the validity of the proposed method. The effectiveness and robustness of the constructed models are analysed by using finite element analysis. The simulation results show that the graded lattice structures in the improved designs have better efficiency in terms of lightweight (33.41–40.32%), stress (25.52–48.55%) and deformation (7.35–19.58%) compared to the initial design.
Ameddah, Hacene, Rabia Selloum, and Mourad Brioua. 2021. “Inspection on a Three-Dimensional Measuring Machine for a Virtual Model for Additive Manufacturing”. In International Conference on Advances in Mechanical Engineering and Mechanics, Advances in Mechanical Engineering, Materials and Mechanics , p. 138–143. Publisher's Version Abstract
Today, and to quickly meet the high demands of variability, supply chain efficiency and energy optimization, business markets are looking for modern manufacturing technologies and as a solution, industry 4.0 is using the benefits of integrating modern manufacturing technologies and information systems to promote production capabilities. In this context, intelligent industry represents a new generation of automatic production systems based on the concepts of intelligent industry, intelligent manufacturing, control and intelligent inspection, such as inspection on coordinate measuring machines (CMMs). This technology allows many machines to be integrated into a plant and controlled online using the MBD (Model Based Design) quality system. The problem of conformity of parts with complex geometry is becoming more and more important. The objective of this work is to present a 3D inspection technique on a virtual model (MBD: Model Based Design), using a coordinate measuring machine equipped with a “POWER INSPECT” measurement and inspection software. The interest of this technique is to show the impact of the dimensional inspection and geometric tolerance process of the CAD model for the CAI (Computer aided Inspection) approach on the fidelity of the finished product for additive manufacturing (AM) including intelligent industry.
       Publications Internationales

1

T. Ameur, M. Assas, H. Mazouz. Optimisation des paramètres de coupe en utilisant l'algorithme à essaim de particules. Matériaux & Techniques Volume 95 / 6 (2007) pages 371-380. EDP Sciences ISSN : 0032-6895. http://www.mattech-ournal.org

 
 

2

D.Djari, M. Assas, M.Djenane, A.Belkacem Bouzida Aissa, H. Mazouz. Optimization of the conditions of machining based on a criterion combined by genetic algorithms. International Review of Machanical Engineering (IREME). May 2007. www.praiseworthyprize.com/IREME.htm

 
 

3

H.Ameddah, M.Assas. Modeling of standard teeth in CAD/CAM Bio-Cad Dentistry. Algerian Journal of Materials 5, 268 (2008).  Algerian Materials Research Society, ISSN 1111-625X/06/18.
http://www.univ-tlemcen.dz/~ajam/

 
 

4

 H. Ameddah, M. Assas.  Interpolation by Bezier curves and NURBS Strategies of Machining of Complex Surfaces In CNC Milling. INTELLIGENT SYSTEMS AND AUTOMATION: 2nd Mediterranean Conference on Intelligent Systems and Automation (CISA'09). AIP Conference Proceedings, Volume 1107, pp. 342-346 (2009). http://adsabs.harvard.edu/abs/2009AIPC.1107..342H

8

S. Brek, R.Manaa,K. Zidani, H. Zedira. H. Djebaili, « Modélisation de la rupture d’un pli unidirectionnel perforé ». Revue des composites et des matériaux avancés (volume 19 n°2/2009). DOI :10.3166/RCMA.19.173-186C2009 Lavoisier, Paris . http://rcma.revuesonline.com/

   

9

B. Barkat, F. Djeffal, N. Abdelmalek and T. Bendib. Design, Control and Experimentation of an Improved Two Axis Sun Tracking System. International Review of Automatic Control (I.RE.A.CO.), Vol.1, n. 4 November 2008. http://www.praiseworthyprize.com/IREACO_vol_1_n_4.html

   

10

  B. Barkat , S. Zeghloul and J.P. Gazeau Optimization of grasping forces in handling of brittle objects.  Journal : Robotics and Autonomous Systems Volume 57, Issue 4, 30 April 2009, Pages 460-468. http://www.sciencedirect.com

   

11

M. S. Khireddine, S. Ouarhlent. "Fault tolerant control in robotic manipulateur via neural network" Volume 9/2009 Edition 3 pages 91-98 www.jee.ro

12

 A. Mihi, R. Benbouta ,  A. Abbassi  and R.  Cottis,  Simulated heat  affected   zone hardness limits of C-Mn  steels used in offshore structures. Materials and Corrosion, Vol. 57, N°10, 766-770, 2006. http://www3.interscience.wiley.com/journal/113385069/issue

   

13

S. Mansouri, R. Benbouta, K. Loucif et M. Benyahia. Densification et caractérisation d’un outil abrasif en corindon aggloméré et détermination de sa durée de vie. Matériaux & Techniques volume 95, (2007) 179-183. www.mattech-journal.org

   

14

A.Abbassi, A. Mihi and R. Benbouta. Monitoring of hydrogen generated by corrosion reactions of steel. Materials and Corrosion, Vol. 59, N°12, 942-947, 2008. http://www3.interscience.wiley.com/journal/121571493/issue.

   

15

A. Abbassi, A. Mihi and R. Benbouta. Corrosion monitoring of hydrogen by HUP probe in the presence of sulphide and thiourea. Materials and Corrosion May 2009. http://www3.interscience.wiley.com/journal/122385919/abstract

   
16 ASSAS. M, BELHATTAB. N, DJENANE. M , «Optimization of metal working based on combined criterion». Revue Morskoy Vestnik , Magazine Issue 2, 2003. Leningrad. Russia.
   
17 H. Mazouz, C. Richard, C. Kowandy, B. Redjel, "Frottement et usure du couple Zircone / Polyéthylène à haute densité (PEHD) à sec et avec liquide de Ringer", Matériaux & Techniques    
   
18 H. Mazouz, "Optimisation topologique de surfaces additionnelles de tôles embouties",  Revue Européenne des Eléments Finis
   
19 C.Kowandy, H.Mazouz, C.Richard. Wear Debris in Articular Joints.Revue Européenne  matériaux. Septembre 2004
   
20 M.BRIOUA, R.BENBOUTA. Numerical simulation of the anisotropic elastic field generated by a misfit dislocations along a NiSi2/Si/(001)GaAs heterotwin interface.Journal of Colloid and interface Science 282 (2005).
 

 

21 BELKACEM-BOUZIDA, Y.DIABALLAH, M.NOTIN .Calorimetric measurement of the intermetallic compounds Cr3Ga and Cr3Ga4 and thermodynamic assessment of the (Cr- Ga) system. Journal of Alloys and Compounds. N°397 (2005)
   
 

Y.DIABALLAH, L.BENNOUR, F.BOUHARKAT, A.BELKACEM-BOUZIDA. Thermodynamic assessment of thee binary system (Bi-Zn). Revue Modeling and Simulation materials Science and Engineering. N° 3 (2005)

R.BENBOUTA. The stress field of a dislocation array in an ultra thin anisotropic heterogeneous bicryctal. Physica.Status.Solid N°13, (2005)

N.SLIMANE Y.ABDESSAMED. N.BOUGUECHAL. A real time controller based on multi-sensor data fusion for an autonomous wheeled mobile robot. Journal of Electrical Engineering N°1.Vomule 4-2004

A.Bouterfa, N.Boughechal.Y.Abdessamed. Pattern recognition with a new hybrid approach on robotics. Journal WSEAS .Article accepté le 12/10/2005

H. Mazouz, M. Assas, ″Finite element procedures for the fast simulation of the tube hydroforming″ 1st International Conferences on New Forming Technology ICNFT’04, Harbin, Chine, 6 et 9 Sep 2004

BARKAT. B. , BATACHE. D., MOHAMMEDI..B. et al.”Etude, conception et rélisation d’un robot 3RT de type SCARA » JIMEC’2004, Université de Amman Jordanie 26-28 Avril 2004

KHIREDDINE. M.S. “Lazer impact induced isomerisation oriented Cis-Polyacetylene by raman spectroscopy” EMRS Meeting 24- 28 may 2004 Stasbourg- France  

H. Mazouz, B. Redjel, C. Richard, M. Assas ″Frottement, usure du polyéthylène à haute densité / zircone et acier inoxydable 316L / zircone sous différents conditions de lubrification″ Journées d’Etudes et Techniques JET’2004. Marrakech, Maroc, 14 et 16 Avril 2004.

H. Naceur,  S. Ben Elichi, H. Mazouz, M. Assas ″Méthode de surface de réponse pour le contrôle du retour élastique en fin d’emboutissage″ Journées d’Etudes et Techniques JET’2004. Marrakech, Maroc, 14 et 16 Avril 2004.

ASSAS. M, DJENANE. M. , « Optimisation des conditions d’usinage basée sur un critère combiné par la méthodes des Algorithmes Génétiques ». Congrès Français de Mécanique CFM’2003, pp : du 1 au 5 Septembre 2003, NICE, France

H. Mazouz, ″Frottement, usure du polyéthylène à haute densité (PEHD)  / zircone (ZrO2 ) et acier inoxydable 316 L / zircone (ZrO2 ) sous différents conditions de lubrification″ Séminaire International de Génie Mécanique SIGMA’02. Oran, Algérie, 28 et 29 Avril 2002

Barkat  B., Azoui  B.,  Chara k, Djarellah M. et Hamouda C.  « Experimentation of  sun tracking system –AureSolar- energetically identification in pumping system application» WREC’2002, 29 June-5 July 2002 Cologne, Germany

DOUDEN. S., ABDESSAMED Y. “Real time navigation of autonomous Mobile Robot” IEEE ICIT’02 Bangkok, Thailand, December 2002

Assas. M . Djenane. M. « Optimisation des conditions d’usinage à l’aide d’un critère combiné pour les opérations à plusieurs passes » Séminaire International de Génie Mécanique SIGMA’02 Oran 28 et 29 Avril 2002

 SEGHIR. K. BENBOUTA R «  Problème de contact en symétrie axiale . Détermination des contraintes à la surface d’une couche élastique sollicitée par un poinçon cylindrique rigide à extrémité plate ». Congrès Français de Mécanique CFM’2003 du 1 au 5 Septembre 2003, NICE, France

BENMOHAMMED. B  LAPUJOULADE. F. MOISAN.A. « Simulation d’une opération de tournage en régime dynamique et validation d’une loi de force de coupe ».1er Congrès International de Mécanique Constantine 14,15 et 16 Décembre 2002

Belhattab. N., Djeddou. F., Zegadi.R., Assas. M. « Etude et réalisation d’un dispositif de soudage par friction-Sans métal d’apport » .1er Congrès International de Mécanique Constantine 14,15 et 16 Décembre 2002

KHIREDDINE. M.S. “Study of Cis-Polyacetylene film isomerisation by raman spectroscopy. ICSM 2002. June 29- July 5, 2002, Shangai, China.

 Barkat  B., Mohammedi  B.  Mekhlouf F.  et Zehouane M. « Conception et réalisation d’un réducteur à grand rapport de réduction » VXème Congrès Français de Mécanique 02-07 septembre 2001 Nancy,  France  

كات بلقاسم ، رحاب حسان،  محمدي إبراهيم و  نايت السعيد نصر الدين " تصميم نظام تتبع الحركة لشمسية لاستخدامه مع أنظمة الخلايا الشمسية" المؤتمر الأردني الدولي الرابع للميكانيكا جامعة عمان الأهلية 8-10 أكتوبر 2001 المملكة الأردنية الهاشمية

Mohammedi  B.  Barkat  B.  Rehab H.  Nait Said N.  « Mechanical design and command of the azimuth movement of the sun tracking system «AURESOLAR» Sharjah Solar Energy Conference 19-22 Fubruary 2001 university of Sharjah UAE

SEGHIR  K., BENBOUTA  R., BELGACEM BOUZIDA. A. “Axi-symmetric contact without friction . Determination of the stress on the limiting surface of an  anisotropies elastic layer requested by a rigid stamp” Fifth international conference on computational Methods in contact mechanics  Seville, Spain 2001

B.Benmohammed, F. Lapujoulade, A. Moisan, "Evaluation of the Dynamic Cutting Force Coefficients Under dynamic Behaviour – Turning case". Premier Congrès International Conception et Modélisation des Systèmes Mécaniques (CMSM’2005), 23-25 Mars 2005, Hammamet - Tunisie. oral

 B. Benmohammed, "Simulation de l’usinage en présence de vibrations. Cas du tournage – Coupe orthogonale". Conférence Internationale de Mécanique Avancée (CIMA’2004). Boumerdès (Algérie). 30 Novembre – 02 Décembre 2004. pp. 1-8. oral

 Rachid BENBOUTA, Kamel SEGHIR . Influence de l’anisotropie sur le champs des déplacements d’un bicristal couche/substrat sous l’effet d’une dislocation interfaciale. 17ème Congrès Français de Mécanique  Septembre 2005, Troyes. France.

Kamel SEGHIR, Rachid BENBOUTA. Détermination des contraintes sur les surfaces limites d’une couche élastique sollicitée par deux ponçons cylindriques rigides. 17ème Congrès Français de Mécanique  Septembre 2005, Troyes. France.

E. H. Achouri, M. Assas, N. Zeghichi,  «Optimisation Multicritère des Conditions de Coupe pour une Passe Simple de Fraisage de Face ». Conférence Internationale de Mécanique Avancée (CIMA’2004). Session. Boumerdès (Algérie). 30 Novembre – 02 Décembre 2004.

Bouachari A. et Barkat B., « Modélisation géométrique d`une main mécanique articulée non anthropomorphe à quatre doigts »”, CMSM’2005 , Hammamet - Tunisie 23-25 Mars 2005.

Tarek Toumi , Barkat B. et Djouani K. « Calcul parallèle de la dynamique inverse : application aux robots à chaînes cinématique ouvertes » 3rd international conference : Sciences of Electronic, Technologies of Information and Telecommunications SETIT’2005, Sousse - Tunisie 27-31 Mars 2005.

R.BENBOUTA. Anisotropic effect on stress distribution generate by a dislocation located at the interface of a thin bicrystal. 8th international Conference on Chemisty and its applications in development. ICCRD’8 Mansoura-Sharam El-Sheikh April 11-14,2005

 

Publications Nationales

1

T. Bendib , B. Barkat , F. Djeffal , N. Hamia  et A. Nidhal. Commande automatique d’un système de poursuite solaire à deux axes à base d’un microcontroleur PIC16F84A. Revue des Energies Renouvelables Vol. 11 N°4 (2008) 523 – 532. 523. www.cder.dz/download/Art11-4_4.pdf